| |
Article Title |
Author(s) |
Pages |
|
|
|
Editorial Board
|
|
CO2
|
|
| Original articles |
| |
Article Title |
Author(s) |
Pages |
|
|
|
Antimicrobial and physicochemical properties of experimental light curing composites with alkali-substituted calcium phosphate fillers
Abstract: Objective: The antimicrobial and physicochemical properties of experimental light curing composites prepared with fillers made of mechanically activated alkali-substituted calcium phosphates...
|
Wolf Herzlieb,
Karolin M. Köhler,
Andrea Ewald,
Norbert Hofmann,
Uwe Gbureck
et al.
|
597-603
|
|
|
|
Surface fluorination of zirconia: Adhesive bond strength comparison to commercial primers
Abstract: Objective: This study evaluated contact angle and shear bond strength of three commercial zirconia primers and compared them to a recently developed fluorination pre-treatment. Earlier inves...
|
Jeffrey R. Piascik,
Edward J. Swift,
Krista Braswell,
Brian R. Stoner
|
604-608
|
|
|
|
Effect of resin-composite filler particle size and shape on shrinkage-stress
Abstract: Objectives: The aim of this study was to investigate the effect of variations in filler particle size and shape on the polymerization shrinkage-stress kinetics of resin-composites. Methods: ...
|
Julian D. Satterthwaite,
Amit Maisuria,
Karin Vogel,
David C. Watts
|
609-614
|
|
|
|
Three years in vivo wear: Core-ceramic, veneers, and enamel antagonists
Abstract: Objectives: Test the hypotheses that there are equivalent wear rates for enamel-versus-enamel and ceramic-versus-enamel, analyzing the in vivo wear of crown ceramics, their natural enamel an...
|
Josephine F. Esquivel-Upshaw,
William F. Rose,
Allyson A. Barrett,
Erica R. Oliveira,
Mark C.K. Yang,
Arthur E. Clark,
Kenneth J. Anusavice
et al.
|
615-621
|
|
|
|
Assessment of the quality of resin–dentin bonded interfaces: An AFM nano-indentation, μTBS and confocal ultramorphology study
Abstract: Objective: The aim of this study was to assess by using confocal microscopy (CLSM), AFM nano-indentation and microtensile bond strength test (μTBS) the quality of the resin–dentin interfaces...
|
Salvatore Sauro,
Raquel Osorio,
Timothy F. Watson,
Manuel Toledano
|
622-631
|
|
|
|
A comparative study between crack analysis and a mechanical test for assessing the polymerization stress of restorative composites
Abstract: Objectives: To verify the hypothesis that crack analysis and a mechanical test would rank a series of composites in a similar order with respect to polymerization stress. Also, both tests wo...
|
Roberto R. Braga,
Takatsugu Yamamoto,
Kenneth Tyler,
Leticia C. Boaro,
Jack L. Ferracane,
Michael V. Swain
et al.
|
632-641
|
|
|
|
Nanocomposite containing CaF2 nanoparticles: Thermal cycling, wear and long-term water-aging
Abstract: Objectives: Fluoride (F) releasing dental restoratives are promising to promote remineralization and combat caries. The objectives of this study were to develop nanocomposite containing calc...
|
Michael D. Weir,
Jennifer L. Moreau,
Eric D. Levine,
Howard E. Strassler,
Laurence C. Chow,
Hockin H.K. Xu
et al.
|
642-652
|
|
|
|
Influence of veneer application on fracture behavior of lithium-disilicate-based ceramic crowns
Abstract: Objectives: To assess the influence of veneer application on fracture behavior, namely failure load and failure mode, of standardized lithium-disilicate-based crowns. Methods: Forty molar cr...
|
Ke Zhao,
Yu Pan,
Petra C. Guess,
Xin-Ping Zhang,
Michael V. Swain
et al.
|
653-660
|
|
|
|
Confocal Raman microscopic analysis of the zirconia/feldspathic ceramic interface
Abstract: Objectives: Esthetic demands and biocompatibility have prompted the development of all-ceramic dental crowns. Yttria tetragonal zirconia polycrystalline (Y-TZP) framework material has the be...
|
Jean-Cédric Durand,
Bruno Jacquot,
Hamideh Salehi,
Michel Fages,
Jacques Margerit,
Frédéric J.G. Cuisinier
et al.
|
661-671
|
|
|
|
pH neutralization and influence on mechanical strength in self-adhesive resin luting agents
Abstract: Objective: The aim of this study was to evaluate if pH-neutralization behavior of self-adhesive resin cements has an influence on their mechanical properties. Methods: pH-neutralization, wat...
|
Jose Zorzin,
Anselm Petschelt,
Johannes Ebert,
Ulrich Lohbauer
|
672-679
|
|
|
|
A comparative evaluation of polymerization stress data obtained with four different mechanical testing systems
Abstract: Objectives: The null hypothesis was that mechanical testing systems used to determine polymerization stress (σpol) would rank a series of composites similarly. Methods: Two series of composi...
|
Flávia Gonçalves,
Leticia C. Boaro,
Jack L. Ferracane,
Roberto R. Braga
|
680-686
|
|
|
|
Mechanical properties and characteristics of developmental copolymers incorporating catechin or chlorhexidine
Abstract: Objectives: This study evaluated catechin and chlorhexidine release from copolymers based on bis-GMA diluted with TEGDMA (R1), propoxylated bis-GMA–CH3bis-GMA (R2) or fluorinated bis-GMA–CF3...
|
Smiley Pallan,
Michel Victor Furtado Araujo,
Renato Cilli,
Anuradha Prakki
|
687-694
|
|
|
|
Fractal analysis of heterogeneous polymer networks formed by photopolymerization of dental dimethacrylates
Abstract: Objectives: In this work the influence of the dimethacrylate monomer chemical structure on structural heterogeneity and physico-mechanical properties of the resulting polymer networks was in...
|
Izabela M. Barszczewska-Rybarek,
Monika Krasowska
|
695-702
|
|
| Online only articles |
| |
Article Title |
Author(s) |
Pages |
|
|
|
Water sorption characteristics of restorative dental composites immersed in acidic drinks
Abstract: Objectives: To determine the diffusion coefficient, water sorption and solubility of various types of restorative dental composites and to evaluate the effect of acidic media (orange juice a...
|
Tuan Noraihan Azila Tuan Rahim,
Dasmawati Mohamad,
Hazizan Md Akil,
Ismail Ab Rahman
|
e63-e70
|
|
|
|
Letter to the Editor: Response to Dr Simonsen
Thank you very much for reading and analyzing our paper very carefully. We enjoyed to read your comments. Your main concerns were addressed (1) to our practice-based statement that light-polymerizing ...
|
Jan Kühnisch
|
e71-e72
|
|
