Dental Materials
Volume 26, Issue 10 , Pages 1024-1033 , October 2010

Effect of shrinkage strain, modulus, and instrument compliance on polymerization shrinkage stress of light-cured composites during the initial curing stage

  • Sun-Hong Min

      Affiliations

    • Department of Conservative Dentistry and Dental Research Institute, School of Dentistry, Seoul National University, 28-2 Yeongeon-Dong, Jongno-Gu, Seoul 110-749, Republic of Korea
    • ,
  • Jack Ferracane

      Affiliations

    • Department of Restorative Dentistry, Division of Biomaterials and Biomechanics, School of Dentistry, Oregon Health & Science University, Portland, OR, USA
    • ,
  • In-Bog Lee

      Affiliations

    • Department of Conservative Dentistry and Dental Research Institute, School of Dentistry, Seoul National University, 28-2 Yeongeon-Dong, Jongno-Gu, Seoul 110-749, Republic of Korea
    • Corresponding Author InformationCorresponding author. Tel.: +82 2 2072 3953; fax: +82 2 2072 3859.

Received 14 December 2009 ,Accepted 7 July 2010.

References 

  1. Ferracane JL. Developing a more complete understanding of stresses produced in dental composites during polymerization. Dent Mater. 2005;21:36–42
  2. Braga RR, Ferracane JL. Alternatives in polymerization contraction stress management. Crit Rev Oral Biol Med. 2004;15:176–184
  3. Ferracane JL, Mitchem JC. Relationship between composite contraction stress and leakage in Class V cavities. Am J Dent. 2003;16:239–243
  4. Lee MR, Cho BH, Son HH, Um CM, Lee IB. Influence of cavity dimension and restoration methods on the cusp deflection of premolars in composite restoration. Dent Mater. 2007;23:288–295
  5. Calheiros FC, Sadek FT, Braga RR, Cardoso PE. Polymerization contraction stress of low-shrinkage composites and its correlation with microleakage in class V restorations. J Dent. 2004;32:407–412
  6. Ferracane JL. Buonocore lecture: placing dental composites – a stressful experience. Oper Dent. 2008;33:247–257
  7. Lu H, Stansbury JW, Dickens SH, Eichmiller FC, Bowman CN. Probing the origins and control of shrinkage stress in dental resin-composites: I. Shrinkage stress characterization technique. J Mater Sci Mater Med. 2004;15:1097–1103
  8. Watts DC, Marouf AS, Al-Hindi AM. Photo-polymerization shrinkage-stress kinetics in resin-composites: methods development. Dent Mater. 2003;19:1–11
  9. Kleverlaan CJ, Feilzer AJ. Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater. 2005;21:1150–1157
  10. Condon JR, Ferracane JL. Assessing the effect of composite formulation on polymerization stress. J Am Dent Assoc. 2000;131:497–503
  11. Lee SH, Chang J, Ferracane J, Lee IB. Influence of instrument compliance and specimen thickness on the polymerization shrinkage stress measurement of light-cured composites. Dent Mater. 2007;23:1093–1100
  12. Feilzer AJ, De Gee AJ, Davidson CL. Quantitative determination of stress reduction by flow in composite restorations. Dent Mater. 1990;6:167–171
  13. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater. 2005;21:68–74
  14. Ilie N, Jelen E, Clementino-Luedemann T, Hickel R. Low-shrinkage composite for dental application. Dent Mater J. 2007;26:149–155
  15. Watts DC, Cash AJ. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. Dent Mater. 1991;7:281–287
  16. Lee IB, Cho BH, Son HH, Um CM, Lim BS. The effect of consistency, specimen geometry and adhesion on the axial polymerization shrinkage measurement of light cured composites. Dent Mater. 2006;22:1071–1079
  17. Seo DG, Min SH, Lee IB. Effect of instrument compliance on the polymerization shrinkage stress measurements of dental resin composites. J Kor Acad Con Dent. 2009;34:146–152
  18. Braga RR, Ballester RY, Ferracane JL. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater. 2005;21:962–970
  19. Davidson CL, Feilzer AJ. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent. 1997;25:435–440
  20. Masouras K, Silikas N, Watts DC. Correlation of filler content and elastic properties of resin-composites. Dent Mater. 2008;24:932–939
  21. Yamazaki PC, Bedran-Russo AK, Pereira PN, Wsift EJ. Microleakage evaluation of a new low-shrinkage composite restorative material. Oper Dent. 2006;31:670–676
  22. Van Ende A, De Munck J, Mine A, Lambrechts P, Van Meerbeek B . Does a low-shrinking composite induce less stress at the adhesive interface?. Dent Mater. 2009;[Epub ahead of print]
  23. Goncalves F, Pfeifer CS, Ferracane JL, Braga RR. Contraction stress determinants in dimethacrylate composites. J Dent Res. 2008;87:367–371
  24. Lee IB, Son HH, Um CM. Rheologic properties of flowable, conventional hybrid, and condensable composite resins. Dent Mater. 2003;19:298–307
  25. Lee IB, Cho BH, Son HH, Um CM. Rheological characterization of composites using a vertical oscillation rheometer. Dent Mater. 2007;23:425–432

PII: S0109-5641(10)00171-5

doi: 10.1016/j.dental.2010.07.002

Dental Materials
Volume 26, Issue 10 , Pages 1024-1033 , October 2010

Article Tools

* Image Usage & Resolution