Dental Materials
Volume 26, Issue 4 , Pages 353-359 , April 2010

Impact of replacing Bis-GMA and TEGDMA by other commercially available monomers on the properties of resin-based composites

Received 5 June 2009 ,Revised 22 October 2009 ,Accepted 9 December 2009.

References 

  1. Yap AU, Teoh SH. Comparison of flexural properties of composite restoratives using the ISO and mini-flexural tests. J Oral Rehabil. 2003;30:171–177
  2. Yap AU, Chung SM, Rong Y, Tsai KT. Effects of aging on mechanical properties of composite restoratives: a depth sensing microindentation approach. Oper Dent. 2004;29:547–553
  3. Leinfelder KF, Bayne SC, Swift EJ. Packable composites: overview and technical considerations. J Esthet Dent. 1999;11:234–249
  4. Mortier E, Gerdolle DA, Jacquot B, Panighi MM. Importance of water sorption and solubility studies for couple bonding agent—resin-based filling material. Oper Dent. 2004;29:669–676
  5. Janda R, Roulet JF, Latta M, Ruttermann S. Water sorption and solubility of contemporary resin-based filling materials. J Biomed Mater Res B: Appl Biomater. 2007;82:545–551
  6. Martin N, Jedynakiewicz NM, Fisher AC. Hygroscopic expansion and solubility of composite restoratives. Dent Mater. 2003;19:77–86
  7. Ruttermann S, Kruger S, Raab WH, Janda R. Polymerization shrinkage and hygroscopic expansion of contemporary posterior resin-based filling materials—a comparative study. J Dent. 2007;35:806–813
  8. Charton C, Amory C, Colon P, Pla F. Shrinkage stress in photoactivated composite resins: significance of product type. Eur Cell Mater. 2005;10(Suppl. 4):18
  9. Herrero AA, Yaman P, Dennison JB. Polymerization shrinkage and depth of cure of packable composites. Quintessence Int. 2005;36:25–31
  10. Kleverlaan CJ, Feilzer AJ. Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater. 2005;21:1150–1157
  11. Atai M, Nekoomanesh M, Hashemi SA, Amani S. Physical and mechanical properties of an experimental dental composite based on a new monomer. Dent Mater. 2004;20:663–668
  12. Skrtic D, Antonucci JM. Effect of bifunctional comonomers on mechanical strength and water sorption of amorphous calcium phosphate- and silanized glass-filled Bis-GMA-based composites. Biomaterials. 2003;24:2881–2888
  13. Lopez Palacio RE, de Carvalho Zavaglia CA. The monomeric formulation optimization of dental composite: mechanical and kinetic studies. Artif Organs. 2003;27:419–423
  14. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials. 2005;26:6449–6459
  15. Sideridou I, Achilias DS, Spyroudi C, Karabela M. Water sorption characteristics of light-cured dental resins and composites based on Bis-EMA/PCDMA. Biomaterials. 2004;25:367–376
  16. Ellakwa A, Cho N, Lee IB. The effect of resin matrix composition on the polymerization shrinkage and rheological properties of experimental dental composites. Dent Mater. 2007;23:1229–1235
  17. Oberholzer TG, Pameijer CH, Grobler SR, Rossouw RJ. Volumetric polymerisation shrinkage of different dental restorative materials. J S Afr Dental Assoc (SADJ). 2004;59:8–12
  18. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003;24:655–665
  19. Gohring TN, Besek MJ, Schmidlin PR. Attritional wear and abrasive surface alterations of composite resin materials in vitro. J Dent. 2002;30:119–127
  20. Shintani H, Satou N, Yukihiro A, Satou J, Yamane I, Kouzai T, et al. Water sorption, solubility and staining properties of microfilled resins polished by various methods. Dent Mater J. 1985;4:54–62
  21. Hofmann N, Renner J, Hugo B, Klaiber B. Elution of leachable components from resin composites after plasma arc vs standard or soft-start halogen light irradiation. J Dent. 2002;30:223–232
  22. Moszner N, Fischer UK, Angermann J, Rheinberger V. A partially aromatic urethane dimethacrylate as a new substitute for Bis-GMA in restorative composites. Dent Mater. 2008;24:694–699
  23. Pereira SG, Osorio R, Toledano M, Nunes TG. Evaluation of two Bis-GMA analogues as potential monomer diluents to improve the mechanical properties of light-cured composite resins. Dent Mater. 2005;21:823–830
  24. Atai M, Ahmadi M, Babanzadeh S, Watts DC. Synthesis, characterization, shrinkage and curing kinetics of a new low-shrinkage urethane dimethacrylate monomer for dental applications. Dent Mater. 2007;23:1030–1041
  25. Moon EJ, Lee JY, Kim CK, Cho BH. Dental restorative composites containing 2,2-bis-[4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane derivatives and spiro orthocarbonates. J Biomed Mater Res B: Appl Biomater. 2005;73:338–346
  26. Hussain LA, Dickens SH, Bowen RL. Properties of eight methacrylated beta-cyclodextrin composite formulations. Dent Mater. 2005;21:210–216
  27. Fong H, Dickens SH, Flaim GM. Evaluation of dental restorative composites containing polyhedral oligomeric silsesquioxane methacrylate. Dent Mater. 2005;21:520–629
  28. Carioscia JA, Lu H, Stanbury JW, Bowman CN. Thiol-ene oligomers as dental restorative materials. Dent Mater. 2005;21:1137–1143
  29. Eick JD, Smith RE, Pinzino CS, Kotha SP, Kostoryz EL, Chappelow CC. Photopolymerization of developmental monomers for dental cationically initiated matrix resins. Dent Mater. 2005;21:384–390
  30. Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci. 1997;105:97–116
  31. Janda R, Roulet JF, Latta M, Ruttermann S. The effects of thermocycling on the flexural strength and flexural modulus of modern resin-based filling materials. Dent Mater. 2006;22:1103–1108
  32. Sauro S, Pashley DH, Mannocci F, Tay FR, Pilecki P, Sherriff M, et al. Micropermeability of current self-etching and etch-and-rinse adhesives bonded to deep dentine: a comparison study using a double-staining/confocal microscopy technique. Eur J Oral Sci. 2008;116:184–193
  33. Ernst CP, Galler P, Willershausen B, Haller B. Marginal integrity of class V restorations: SEM versus dye penetration. Dent Mater. 2008;24:319–327
  34. Pereira SG, Nunes TG, Kalachandra S. Low viscosity dimethacrylate comonomer compositions [Bis-GMA and CH3Bis-GMA] for novel dental composites; analysis of the network by stray-field MRI, solid-state NMR and DSC & FTIR. Biomaterials. 2002;23:3799–3806
  35. Chung CM, Kim MS, Kim JG, Jang DO. Synthesis and photopolymerization of trifunctional methacrylates and their application as dental monomers. J Biomed Mater Res. 2002;62:622–627
  36. EN ISO 4049: 2000 Dentistry—polymer-based filling, restorative and luting materials.
  37. Croll TP. Concerns about microabrasion. Pediatr Dent. 1997;19:242–245
  38. Yap AU, Wee KE. Effects of cyclic temperature changes on water sorption and solubility of composite restoratives. Oper Dent. 2002;27:147–153
  39. Uhl A, Mills RW, Rzanny AE, Jandt KD. Time dependence of composite shrinkage using halogen and LED light curing. Dent Mater. 2005;21:278–286
  40. Asmussen E, Peutzfeldt A. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater. 1998;14:51–56
  41. Usumez S, Buyukyilmaz T, Karaman AI, Gunduz B. Degree of conversion of two lingual retainer adhesives cured with different light sources. Eur J Orthod. 2005;27:173–179
  42. Chinelatti MA, Ramos RP, Chimello DT, Palma-Dibb RG. Clinical performance of a resin-modified glass-ionomer and two polyacid-modified resin composites in cervical lesions restorations: 1-year follow-up. J Oral Rehabil. 2004;31:251–257
  43. Hedzelek W, Wachowiak R, Marcinkowska A, GDomka L. Infrared spectroscopic identification of chosen dental materials and natural teeth. Acta Phys Pol A. 2008;114:471–484
  44. Terry DA, Leinfelder KF. Development of a processed composite resin restoration: preparation and laboratory fabrication. Int Dent SA. 2006;8:12–20
  45. Davidenko N, Garcia O, Sastre R. The efficiency of titanocene as photoinitiator in the polymerization of dental formulations. J Biomater Sci Polym Ed. 2003;14:733–746
  46. Indrani DJ, Cook WD, Televantos F, Tyas MJ, Harcourt JK. Fracture toughness of water-aged resin composite restorative materials. Dent Mater. 1995;11:201–207
  47. Veranes Y, Correa D, Martin JM, Krael R, Alvarez R. Characterization of dental composites prepared from Bis-GMA/TEEGDMA and Bis-GMA/MPS mixtures. Latin Am Appl Res. 2006;36:1–6
  48. Guler AU, Guler E, Yucel AC, Ertas E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci. 2009;17:108–112
  49. Giorgi MC, Paulillo MAMS. Knoop hardness of composites cured with halogen and led light-curing units in class I restorations. Braz J Oral Sci. 2009;8:30–33
  50. Kim JG, Chung CM. Trifunctional methacrylate monomers and their photocured composites with reduced curing shrinkage, water sorption, and water solubility. Biomaterials. 2003;24:3845–3851

PII: S0109-5641(09)00510-7

doi: 10.1016/j.dental.2009.12.006

Dental Materials
Volume 26, Issue 4 , Pages 353-359 , April 2010

Article Tools