Dental Materials
Volume 26, Issue 4 , Pages 295-305 , April 2010

Surface characterization of zirconia dental implants

  • S. Zinelis

      Affiliations

    • Department of Biomaterials, University of Athens, Greece
  • ,
  • A. Thomas

      Affiliations

    • School of Physics and Astronomy, Photon Science Institute, University of Manchester, UK
  • ,
  • K. Syres

      Affiliations

    • School of Physics and Astronomy, Photon Science Institute, University of Manchester, UK
  • ,
  • N. Silikas

      Affiliations

    • Biomaterials Unit, University of Manchester, UK
  • ,
  • G. Eliades

      Affiliations

    • Department of Biomaterials, University of Athens, Greece
    • Corresponding Author InformationCorresponding author at: Department of Biomaterials, University of Athens, School of Dentistry, 2 Thivon Str-Goudi, 115 27 Athens, Greece. Tel.: +30 210 7461101; fax: +30 210 7461306.

Received 27 May 2009 ,Revised 27 September 2009 ,Accepted 17 November 2009.

References 

  1. Piconi C, Maccauro G, Muratori F, Branch del Prever E. Alumina and zirconia ceramics in joint replacements. J Appl Biomater Biomech. 2003;1:19–32
  2. Hisbergues M, Vendeville S, Vendeville P. Zirconia: established facts and perspectives for biometerial in dental implantology. J Biomed Mater Res Part B: Appl Biomater. 2009;88B:519–529
  3. Degidi M, Artese L, Scarano A, Perrotti V, Gehrke P, Piattelli A. Inflammatory infiltrate, microvessel density, nitric oxide synthase expression, and proliferative activity in peri-implant soft tissues around titanium oxide healing caps. J Periodontol. 2006;77:73–80
  4. Rimondini L, Cerroni L, Carrasi A, Torricelli P. Bacterial colonization of zirconia ceramic surfaces: an in vitro and in vivo study. Int J Oral Maxillofac Implants. 2002;17:793–798
  5. Bianchi AE, Bosetti M, Dolci G, Sberna MT, Sanfilippo F, Cannas M. In vitro and in vivo follow-up of titanium transmucosal implants with zirconia collar. J Appl Biomater Biomech. 2004;2:143–150
  6. Scarano A, Piatelli M, Caputi S, Favero GA, Piattelli A. Bacterial adhesion on commercially pure titanium and zirconium oxide disks: an in vivo human study. J Periodontol. 2004;75:292–296
  7. Depprich R, Ommerborn M, Zipprich H, Naujoks C, Handschel J, Wiesmann H-P, et al. Behavior of osteoblastic cells cultured on titanium and structured zirconia surfaces. Head Face Med. 2008;4:29
  8. Scarano A, Di Carlo F, Quaranta M, Piattelli A. Bone response to zirconia ceramic implants: an experimental study in rabbits. J Oral Implantol. 2003;29:8–12
  9. Kohal RJ, Weng D, Bachle M, Strub JR. Loaded custom-made zirconia and titanium implants show similar osseointegration: an animal experiment. J Periodontol. 2004;75:1262–1268
  10. Wenz HJ, Bartsch J, Wolfart S, Kern M. Osseointegration and clinical success of zirconia dental implants: a systematic review. Int J Prosthodont. 2008;21:27–36
  11. Lawson S. Environmental degradation of zirconia ceramics. J Euro Ceram Soc. 1995;15:485–502
  12. Chevalier J. What future of zirconia as a biomaterial?. Biomaterials. 2006;27:535–543
  13. Chevalier J, Gremillard L, Deville S. Low-temperature degradation of zirconia and implications for biomedical implants. Ann Rev Mater Res. 2007;37:1–32
  14. Gahlert M, Gudehus T, Eichhorn S, Steinhauser S, Kniha H, Erhardt W. Biomechanical and histomorphometric comparison between zirconia implants with varying surface textures and a titanium implant in the maxilla of miniature pigs. Clin Oral Impl Res. 2007;18:662–668
  15. Clarke DR, Adar F. Measurement of the crystallographically transformed zone produced by fracture in ceramics containing tetragonal zirconia. J Am Ceram Soc. 1982;65:284–288
  16. http://icsdweb.fiz-karlsruhe.de/
  17. ISO 13356. Implants for surgery-ceramic materials based on yttria stabilized tetragonal zirconia (Y-TZP). Geneva: International Standardization Organization; 1997.
  18. ASTM F1873-98: High-purity dense yttria-tetragonal zirconium oxide polycrystal (Y-TZP) for surgical implant applications. American Society for Testing and Materials 1998:13.01;908 [withdrawn].
  19. Deville S, Chevalier J, Gremillard L. Influence of surface finish and residual stresses on the aging sensitivity of biomedical grade zirconia. Biomaterials. 2006;27:2186–2192
  20. Piattelli A, Degidi M, Paolantonio M, Mangano C, Scarano A. Residual aluminum oxide on the surface of titanium implants has no effect on osseointegration. Biomaterials. 2003;24:4081–4089
  21. Aita H, Hori N, Takeuchi M, Suzuki T, Yamada M, Anpo M, et al. The effect of ultraviolet functionalization of titanium on integration with bone. Biomaterials. 2009;30:1015–1025
  22. Massaro C, Rotolo P, De Riccardis F, Milella E, Napoli A, Wieland M, et al. Comparative investigation of the surface properties of commercial titanium dental implants. Part I: chemical composition. J Mater Sci Mater Med. 2002;13:538–548
  23. Pezzotti G, Yamada K, Sakakura S, Pitto RP. Raman spectroscopic analysis of advanced ceramic composite for hip prosthesis. J Am Ceram Soc. 2008;91:1199–1206
  24. Chevalier J, Cales B, Drouin JM. Low-temperature aging of Y-TZP ceramics. J Am Ceram Soc. 1999;82:2150–2154
  25. Thompson I, Rawlings RD. Mechanical behaviour of zirconia and zirconia-toughened alumina in a simulated body environment. Biomaterials. 1990;11:505–508
  26. Fernandez-Fairen M, Sala P, Gil FJ. Failures of yttria stabilized tetragonal zirconia: 52 retrieved ceramic femoral heads of total hip prostheses. Biomed Mater Eng. 2006;16:415–422
  27. Mǔnoz MC, Gallego S, Beltrán JI, Cerdá J. Adhesion at metal–ZrO2 interfaces. Surf Sci Rep. 2006;61:303–344
  28. Macdonald W, Campbell P, Fisher J, Wennerberg A. Variation in surface texture measurements. J Biomed Mater Res Part B: Appl Biomater. 2004;70B:262–269
  29. Thomas KA, Cook S. An evaluation of variables influencing implant fixation by direct implant apposition. J Biomed Mater Res. 1985;19:875–901
  30. Shalabi MM, GortemakerA , Van’t Hof MA, Jansen JA, Creugers NH. Implant surface roughness and bone healing: a systematic review. J Dent Res. 2006;85:496–500

PII: S0109-5641(09)00424-2

doi: 10.1016/j.dental.2009.11.079

Dental Materials
Volume 26, Issue 4 , Pages 295-305 , April 2010