« Previous
Next »
Dental Materials
Volume 26, Issue 4
, Pages 288-294
, April 2010
Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content
References
- . Have dentin adhesives become too hydrophilic?. J Can Dent Assoc. 2003;69:724–731
- Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res. 1999;78:906–911
- . Water sorption of several bonding resins. Am J Dent. 1999;12:295–298
- In vivo long-term durability of the bond to dentin using two adhesive systems. J Adhes Dent. 2002;4:151–159
- Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res. 2003;82:136–140
- . Single-step adhesives are permeable membranes. J Dent. 2002;30:371–382
- Degree of conversion of resin blends in relation to ethanol content and hydrophilicity. Dent Mater. 2008;24:1194–1200
- Effects of residual ethanol on the rate and degree of conversion of five experimental resins. Dent Mater. 2009;25:621–628
- Degree of conversion and permeability of dental adhesives. Eur J Oral Sci. 2005;113:525–530
- Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability. Dent Mater. 2007;23:1066–1072
- . Reaction kinetics and volume relaxation during polymerizations of multiethylene glycol dimethacrylates. Macromolecules. 1995;28:2491–2499
- . Effect of dilution on the kinetics of cross-linking thermal polymerization of dental composite matrix resins. J Mater Sci Mater Med. 1997;8:583–586
- Effects of ethanol addition on the water sorption/solubility and percent of comonomers conversion in model dental adhesives. Dental Mater. 2009;25:1275–1284
- . Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent. 1999;27:209–214
- . Two modes of nanoleakage expression in single-step adhesives. J Dent Res. 2002;81:472–476
- . Nanoscale patterning in crosslinked methacrylate copolymer networks: an atomic force microscopy study. J Appl Polym Sci Symp. 2007;106:3843–3851
- . In vitro performance of nano-heterogeneous dentin adhesive. J Dent Res. 2008;87:829–833
- . Effect of coinitiator and water on the photoreactivity and photopolymerization of HEMA/camphoroquinone-based reactant mixtures. J Biomed Mater Res. 2006;78A:721–728
- . Can CQ be completely replaced by alternative initiators in dental adhesives?. Dent Mater J. 2008;27:221–228
- . Principles of polymerization. New York: Wiley; 1981;
- . The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res. 1986;20(1):121–131
- . Elution of leachable components from composites. J Oral Rehabil. 1994;21(4):441–452
- . Elution of TEGDMA and BisGMA from a resin and a resin composite cured with halogen or plasma light. Eur J Oral Sci. 2000;108(4):341–345
- Optimization of the concentration of photo-initiator in a one-step self-etch adhesive. Dent Mater. 2009;[Epub ahead of print]
- . The overwet phenomenon: a transmission electron microscopic study of surface moisture in the acid-conditioned, resin–dentin interface. Am J Dent. 1996;9:161–166
- . An optical, micromorphological study of surface moisture in the total etched resin–dentin interface. Am J Dent. 1996;9:43–48
- . Continuing etching of an all-in-one adhesive in wet dentin tubules. J Dent Res. 2005;84:350–354
- . Physicochemical interactions at the interfaces between self-etch adhesive systems and dentin. J Dent. 2004;32:567–579
- . Characterization of photopolymerization of dental adhesives as a function of light source and irradiance. J Biomed Mater Res Part B: Appl Biomater. 2007;80B:440–446
- . Some effects of water on dentin bonding. Dent Mater. 1995;11:132–136
- . Adhesive phase separation at the dentin interface under wet bonding conditions. J Biomed Mater Res. 2002;62:447–456
- Camphorquinone-amines photoinitiating systems for the initiation of free radical polymerization. Polymer. 2003;44:5219–5226
- . Color stability of resin matrix restorative materials as a function of the method of light activation. Eur J Oral Sci. 2004;112:280–285
- . Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems. Oper Dent. 2003;28:747–755
- . Adverse surface interaction between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater. 2001;17:542–556
- . Chemical aspects of self-etching enamel–dentin adhesives: a systematic review. Dent Mater. 2005;21:895–910
- . Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units. J Dent. 2005;33:525–532
- BASF Corporation. Lucirin TPO, Technical Information. http://www.basf.com/rawmaterials/pdfs/LUC-TPO.pdf; 2001.
PII: S0109-5641(09)00423-0
doi: 10.1016/j.dental.2009.11.078
© 2009 Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.
« Previous
Next »
Dental Materials
Volume 26, Issue 4
, Pages 288-294
, April 2010
