Dental Materials
Volume 26, Issue 3 , Pages 249-256 , March 2010

Effect of element concentration on nickel release from dental alloys using a novel ion beam method

Received 4 November 2008 ,Revised 20 October 2009 ,Accepted 5 November 2009.

References 

  1. Pierce LH, Goodkind RJ. A status report of possible risks of base metal alloys and their components. The Journal of Prosthetic Dentistry. 1989;62(2):234–238
  2. Wassell RW, Walls AWG, Steele JG. Crowns and extra-coronal restorations: materials selection. British Dental Journal. 2002;192(4):199–211
  3. Dunlap CL, Vincent SK, Barker BF. Allergic reaction to orthodontic wire: report of case. Journal of the American Dental Association. 1989;118(4):449–450
  4. Eggleston DW. Effect of dental amalgam and nickel alloys on T-lymphocytes: preliminary report. Journal of Prosthetic Dentistry. 1984;51(5):617–623
  5. Van Noort R, Gjerdet NR, Schedle A, Bjorkman L, Berglund A. An overview of the current status of national reporting systems for adverse reactions to dental materials. 81st general session of the international association of dental research annual convention. Journal of Dentistry. 2004;32(5):351–358
  6. Lygre GB, Gjerdet NR, Gronningsaeter AG, Bjorkman L. Reporting on adverse reactions to dental materials--intraoral observations at a clinical follow-up. Community Dentistry & Oral Epidemiology. 2003;31(3):200–206
  7. Vamnes JS, Lygre GB, Gronningsaeter AG, Gjerdet NR. Four years of clinical experience with an adverse reaction unit for dental biomaterials. Community Dentistry & Oral Epidemiology. 2004;32(2):150–157
  8. Garhammer P, Schmalz G, Hiller KA, Reitinger T, Stolz W. Patients with local adverse effects from dental alloys: frequency, complaints, symptoms, allergy. Clinical Oral Investigations. 2001;5(4):240–249
  9. Scott A, Egner W, Gawkrodger DJ, Hatton PV, Sherriff M, van Noort R, et al. The national survey of adverse reactions to dental materials in the UK: a preliminary study by the UK Adverse Reactions Reporting Project. British Dental Journal. 2004;196(8):471–477
  10. López-Alías JF, Martinez-Gomis J, Anglada JM, Peraire M. Ion release from dental casting alloys as assessed by a continuous flow system: nutritional and toxicological implications. Dental Materials. 2006;22(9):832–837
  11. Denizoglu S, Yesil Duymus Z, Akyalcin S. Evaluation of ion release from two base–metal alloys at various pH levels. The Journal of International Medical Research. 2004;32:33–38
  12. Wataha JC, Nelson SK, Lockwood PE. Element release from dental casting alloys into biological media with and without protein. Dental Materials. 2001;17:409–414
  13. Wataha JC, Lockwood PE, Khajotia SS, Turner R. Effect of pH on element release from dental casting alloys. Journal of Prosthetic Dentistry. 1998;80:691–699
  14. Wataha JC, Lockwood PE, Mettenburg D, Bouillaguet S. Toothbrushing causes elemental release from dental casting alloys over extended intervals. Journal of Biomedical Materials Research B Applied Biomaterials. 2003;65:180–185
  15. Wylie CM, Shelton RM, Fleming GJP, Davenport AJ. Corrosion of nickel-based dental casting alloys. Dental Materials. 2007;23:714–723
  16. Ciszewski A, Baraniak M, Urbanek-Brychczyńska . Corrosion by galvanic coupling between amalgam and different chromium-based alloys. Dental Materials. 2007;23:1256–1261
  17. Geis-Gerstorfer J, Sauer KH, Passler K. Ion release from Ni–Cr–Mo and Co–Cr–Mo casting alloys. International Journal of Prosthodontics. 1991;4(2):152–158
  18. Espevik S. Corrosion of base metal alloys in vitro. Acta Odontologica Scandinavica. 1978;36(3):113–117
  19. Colligon JS. Applications of ion-beam-assisted deposition. Materials Science and Engineering. 1991;A139:199–206
  20. Colligon JS. Ion bombardment of metal surfaces. Vacuum. 1961;11:272–281
  21. Stuart RV. Vacuum technology, thin films and sputtering: an introduction. London: Academic Press; 1983;
  22. Leinartas K, Samuleviciene M, Bagdonas A, Sudavicius A, Lisauskas V, Juzeliunas E. Electrochemical and microgravimetric characterization of magnetron-sputtered Fe–Cr–Ni–Ta and Fe–Cr–Ni alloy films in neutral and strongly acidic media. Electrochemistry Communications. 2001;3(9):494–499
  23. Juzeliunas E, Leinartas K, Samuleviciene M, Miecinskas P, Juskenas R, Sudavicius A. Magnetron sputtered Au–Pd–In alloys: microgravimetric and electrochemical characterisation in simulated physiological solutions. Corrosion Science. 2002;44(7):1541–1554
  24. Baran GR. The metallurgy of Ni–Cr alloys for fixed prosthodontics. Journal of Prosthetic Dentistry. 1983;50(5):639–650
  25. Bumgardner JD, Lucas LC. Surface analysis of nickel–chromium dental alloys. Dental Materials. 1993;9(4):252–259
  26. Canay S, Oktemer M. In vitro corrosion behavior of 13 prosthodontic alloys. Quintessence International. 1992;23(4):279–287
  27. Geis-Gerstorfer J, Weber H. In vitro corrosion behavior of four Ni–Cr dental alloys in lactic acid and sodium chloride solutions. Dental Materials. 1987;3(6):289–295
  28. Muller AW, Maessen FJ, Davidson CL. Determination of the corrosion rates of six dental NiCrMo alloys in an artificial saliva by chemical analysis of the medium using ICP-AES. Dental Materials. 1990;6(1):63–68
  29. Meyer J-M. Corrosion resistance of nickel–chromium dental casting alloys. Corrosion Science. 1977;17(12):971–982
  30. Muller AWJ, Maessen FJMJ, Davidson CL. The corrosion rates of five dental Ni–Cr–Mo alloys determined by chemical analysis of the medium using ICP-AES, and by the potentiostatic de-aeration method. Corrosion Science. 1990;30(6–7):583–601
  31. Baran G. Auger chemical analysis of oxides on Ni–Cr alloys. Journal of Dental Research. 1984;63(1):76–80
  32. Huang HH. Effect of chemical composition on the corrosion behavior of Ni–Cr–Mo dental casting alloys. Journal of Biomedical Materials Research. 2002;60(3):458–465
  33. Huang H-H. Surface characterization of passive film on NiCr-based dental casting alloys. Biomaterials. 2003;24(9):1575–1582
  34. Anusavice KJ. Phillips’ science of dental materials. Saunders; 2003;pp. 6–8
  35. Davis JR. Corrosion: Understanding the Basics. ASM International; 2000;pp. 91–192
  36. Craig RG. Restorative dental materials. 10th ed.. Mosby; 1997;pp. 393–95
  37. A to Z of Materials online 2000: Nickel Chrome Alloys, retrieved 18 June 2008, available at http://www.azom.com/Details.asp?ArticleID=916.
  38. Chan KS, Pan Y-M, Lee Y-d. Development of a first-principles computational methodology for predicting long-term material stability and mechanical performance18-9420; 2004, retrieved 18 June 2008, available at http://www.swri.org/3pubs/ird2004/Synopses/189420.htm.

PII: S0109-5641(09)00337-6

doi: 10.1016/j.dental.2009.11.002

Dental Materials
Volume 26, Issue 3 , Pages 249-256 , March 2010

Article Tools

* Image Usage & Resolution