Dental Materials
Volume 26, Issue 3 , Pages 193-206 , March 2010

Crown pull-off test (crown retention test) to evaluate the bonding effectiveness of luting agents

  • S.D. Heintze

      Affiliations

    • Corresponding Author InformationTel.: +423 235 3570; fax: +423 233 1279.

Received 16 January 2009 ,Revised 19 June 2009 ,Accepted 19 October 2009.

References 

  1. Edelhoff D, Özcan M. To what extent does the longevity of fixed dental prostheses depend on the function of the cement? Working Group 4 materials: cementation. Clin Oral Implants Res. 2007;18:193–204
  2. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the current literature. J Prosthet Dent. 1998;80:280–301
  3. Krämer N, Lohbauer U, Frankenberger R. Adhesive luting of indirect restorations. Am J Dent. 2000;13:60D–76D
  4. Cameron SM, Morris WJ, Keesee SM, Barsky TB, Parker MH. The effect of preparation taper on the retention of cemented cast crowns under lateral fatigue loading. J Prosthet Dent. 2006;95:456–461
  5. Escribano N, de la Macorra JC. Microtensile bond strength of self-adhesive luting cements to ceramic. J Adhes Dent. 2006;8:337–341
  6. Yang B, Ludwig K, Adelung R, Kern M. Micro-tensile bond strength of three luting resins to human regional dentin. Dent Mater. 2006;22:45–56
  7. Pace LL, Hummel SK, Marker VA, Bolouri A. Comparison of the flexural strength of five adhesive resin cements. J Prosthodont. 2007;16:18–24
  8. Lee IB, An W, Chang J, Um CM. Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements. Dent Mater. 2008;24:1141–1147
  9. Cattani-Lorente MA, Dupuis V, Payan J, Moya F, Meyer JM. Effect of water on the physical properties of resin-modified glass ionomer cements. Dent Mater. 1999;15:71–78
  10. Cury AH, Goracci C, de Lima Navarro MF, Carvalho RM, Sadek FT, Tay FR, et al. Effect of hygroscopic expansion on the push-out resistance of glass ionomer-based cements used for the luting of glass fiber posts. J Endod. 2006;32:537–540
  11. Bohlsen F, Kern M. Clinical outcome of glass-fiber-reinforced crowns and fixed partial dentures: a three-year retrospective study. Quintessence Int. 2003;34:493–496
  12. Leloup G, D’Hoore W, Bouter D, Degrange M, Vreven J. Meta-analytical review of factors involved in dentin adherence. J Dent Res. 2001;80:1605–1614
  13. Zidan O, Ferguson GC. The retention of complete crowns prepared with three different tapers and luted with four different cements. J Prosthet Dent. 2003;89:565–571
  14. Ayad MF, Rosenstiel SF, Salama M. Influence of tooth surface roughness and type of cement on retention of complete cast crowns. J Prosthet Dent. 1997;77:116–121
  15. Tuntiprawon M. Effect of tooth surface roughness on marginal seating and retention of complete metal crowns. J Prosthet Dent. 1999;81:142–147
  16. Carter SM, Wilson PR. The effect of die-spacing on crown retention. Int J Prosthodont. 1996;9:21–29
  17. Johnson GH, Hazelton LR, Bales DJ, Lepe X. The effect of a resin-based sealer on crown retention for three types of cement. J Prosthet Dent. 2004;91:428–435
  18. Piemjai M. Effect of seating force, margin design, and cement on marginal seal and retention of complete metal crowns. Int J Prosthodont. 2001;14:412–416
  19. Wolfart S, Linnemann J, Kern M. Crown retention with use of different sealing systems on prepared dentine. J Oral Rehabil. 2003;30:1053–1061
  20. Arcoria CJ, Dewald JP, Vitasek BA, Wagner MJ. Effect of undercut placement on crown retention after thermocycling. J Oral Rehabil. 1990;17:395–402
  21. Ernst CP, Aksoy E, Horn JG, Stender E, Willershausen B. Retentive strength of all ceramic crowns after long-term water storage. J Dent Res. 2006;85:[PEFIADR:Abstract No. 248]
  22. Yim NH, Rueggeberg FA, Caughman WF, Gardner FM, Pashley DH. Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations. J Prosthet Dent. 2000;83:459–465
  23. Pameijer CH, Hulten J, Glantz PO, Randow K. Influence of low-viscosity liners on the retention of three luting materials. Int J Periodontics Restorative Dent. 1992;12:195–205
  24. Johnson GH, Lepe X, Bales DJ. Crown retention with use of a 5% glutaraldehyde sealer on prepared dentin. J Prosthet Dent. 1998;79:671–676
  25. Swift EJ, Lloyd AH, Felton DA. The effect of resin desensitizing agents on crown retention. J Am Dent Assoc. 1997;128:195–200
  26. Sipahi C, Cehreli M, Ozen J, Dalkiz M. Effects of precementation desensitizing laser treatment and conventional desensitizing agents on crown retention. Int J Prosthodont. 2007;20:289–292
  27. Ayad MF, Rosenstiel SF, Woelfel JB. The effect of recementation on crown retention. Int J Prosthodont. 1998;11:177–182
  28. Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent. 2006;96:104–114
  29. Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent. 2005;93:551–558
  30. Chan DC, Wilson AH, Barbe P, Cronin RJ, Chung C, Chung K. Effect of preparation convergence on retention and seating discrepancy of complete veneer crowns. J Oral Rehabil. 2005;32:58–64
  31. Gundler A, Lockowandt P, Erhardson S. Crown retention and cyclic loading (in vitro). Scand J Dent Res. 1993;101:252–256
  32. Wiskott HW, Nicholls JI, Belser UC. The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont. 1996;9:117–139
  33. Sato T, Al Mutawa N, Okada D, Hasegawa S. A clinical study on abutment taper and height of full cast crown preparations. J Med Dent Sci. 1998;45:205–210
  34. Rafeek RN, Marchan SM, Seymour KG, Zou LF, Samarawickrama DY. Abutment taper of full cast crown preparations by dental students in the UWI School of Dentistry. Eur J Prosthodont Restor Dent. 2006;14:63–66
  35. Heintze SD. Systematic reviews: (1) The correlation between laboratory tests on marginal quality and bond strength. (2) The correlation between marginal quality and clinical outcome. J Adhes Dent. 2007;9(Suppl. 1):77–106
  36. Holderegger C, Sailer I, Schuhmacher C, Schlapfer R, Hämmerle C, Fischer J. Shear bond strength of resin cements to human dentin. Dent Mater. 2008;24:944–950
  37. Walter R, Miguez PA, Pereira PN. Microtensile bond strength of luting materials to coronal and root dentin. J Esthet Restor Dent. 2005;17:165–171
  38. Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T, et al. Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater. 2007;23:71–80
  39. Berry EA, Powers JM. Bond strength of glass ionomers to coronal and radicular dentin. Oper Dent. 1994;19:122–126
  40. Feilzer AJ, De Gee AJ, Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res. 1987;66:1636–1639
  41. Nikolaenko SA, Lohbauer U, Roggendorf M, Petschelt A, Dasch W, Frankenberger R. Influence of c-factor and layering technique on microtensile bond strength to dentin. Dent Mater. 2004;20:579–585
  42. Jokstad A, Mjör IA. Ten years’ clinical evaluation of three luting cements. J Dent. 1996;24:309–315
  43. Jokstad A. A split-mouth randomized clinical trial of single crowns retained with resin-modified glass-ionomer and zinc phosphate luting cements. Int J Prosthodont. 2004;17:411–416
  44. Tan K, Pjetursson BE, Lang NP, Chan ES. Conventional FPDs. A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clin Oral Implants Res. 2004;15:654–666
  45. Sailer I, Pjetursson BE, Zwahlen M, Hämmerle CH. A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part II. Fixed dental prostheses. Clin Oral Implants Res. 2007;18:86–96
  46. Edelhoff D, Horstkemper T, Richter E-J, Spiekermann H, Yildirim M. Adhäsiv und konventionell befestigte Empress 1-Kronen. Dtsch Zahnärztl Z. 2000;55:326–330
  47. Ernst CP, Wenzl N, Stender E, Willershausen B. Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement. J Prosthet Dent. 1998;79:472–476
  48. Lawson NC, Burgess JO, Mercante D. Crown retention and flexural strength of eight provisional cements. J Prosthet Dent. 2007;98:455–460
  49. Mitchell CA, Abbariki M, Orr JF. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coverage crowns. Dent Mater. 2000;16:198–206
  50. Sorensen JA, Trotman R, Yokohama K. Clinical longevity of CAD/CAM generated Y-TZP posterior fixed partial dentures. J Dent Res. 2007;86:[Abstract No. 293]
  51. Crisp RJ, Cowan AJ, Lamb J, Thompson O, Tulloch N, Burke FJ. A clinical evaluation of all-ceramic bridges placed in UK general dental practices: first-year results. Br Dent J. 2008;205:477–482
  52. Crisp RJ. Five-year evaluation of zirconia-based bridges in general practice: year-three results. J Dent Res. 2009;88:[Abstract No. 3234]
  53. Nothdurft FP, Rountree PR, Pospiech P. Clinical long-term behavior of zirconia-based bridges (LAVA): five years results. J Dent Res. 2006;85:[Abstract 312]
  54. Raigrodski AJ, Chiche GJ, Potiket N, Hochstedler JL, Mohamed SE, Billiot S, et al. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent. 2006;96:237–244
  55. Sorensen JA, Rusch R, Yokohama K. Clinical longevity of CAD/CAM generated Y-TZP posterior fixed partial dentures. J Dent Res. 2006;85:[Abstract No. 270]
  56. Sailer I, Feher A, Filser F, Gauckler LJ, Lüthy H, Hämmerle CH. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont. 2007;20:383–388
  57. Barnes DM, Arribas A, Gingell JC, Rajaski J, Sundar V, Warren P. 24 month clinical evaluation of cercon zirconia all ceramic restorations. J Dent Res. 2008;87:[AADR:Abstract No. 1070]
  58. Roediger M, Rinke S, Huels A. Prospective clinical evaluation of CerconTM premolar and molar FPDs. J Dent Res. 2008;87:[Abstract No. 2347]
  59. Wolfart S, Eschbach S, Kern M. Outcome of posterior FPDs of veneered zirconia ceramic (Cercon). J Dent Res. 2008;87:[Abstract No. 576]
  60. Mussotter K, Rammelsberg P, Ohlmann B, Gabbert O, Schmitter M. Extended all-ceramic fixed partial dentures – clinical performance after one year. J Dent Res. 2008;87:[Abstract Nr. 2338]
  61. Beuer F, Edelhoff D, Gernet W, Sorensen JA. Three-year clinical prospective evaluation of zirconia-based posterior fixed dental prostheses (FDPs). Clin Oral Investig. 2009;[Epub ahead of print, January]
  62. Tinschert J, Schulze KA, Natt G, Latzke P, Heussen N, Spiekermann H. Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont. 2008;21:217–222
  63. Vult von Steyern P, Carlson P, Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study. J Oral Rehabil. 2005;32:180–187
  64. Molin MK, Karlsson SL. Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs. Int J Prosthodont. 2008;21:223–227

PII: S0109-5641(09)00332-7

doi: 10.1016/j.dental.2009.10.004

Dental Materials
Volume 26, Issue 3 , Pages 193-206 , March 2010

Article Tools

* Image Usage & Resolution