Dental Materials
Volume 25, Issue 8 , Pages 952-955 , August 2009

Hertzian load-bearing capacity of a ceramic-reinforced glass ionomer cement stored wet and dry

  • Yan Wang

      Affiliations

    • Department of Prosthodontics, Guanghua School of Stomatology, Sun Yat-sen University, Guang Zhou, China
    • Dental Materials Science, Faculty of Dentistry, The University of Hong Kong, Hong Kong
    • ,
  • B.W. Darvell

      Affiliations

    • Dental Materials Science, Faculty of Dentistry, The University of Hong Kong, Hong Kong
    • Corresponding Author InformationCorresponding author at: Dental Materials Science, Prince Philip Dental Hospital, 34 Hospital Road, Hong Kong. Tel.: +852 2859 0303; fax: +852 2548 9464.

Received 6 March 2008 ,Revised 11 November 2008 ,Accepted 12 February 2009.

References 

  1. Wilson AD, Crisp S, Abel G. Characterization of glass-ionomer cements. 4. Effect of molecular-weight on physical properties. J Dent. 1977;5(2):117–120
  2. Prosser HJ, Powis DR, Wilson AD. Glass-ionomer cements of improved flexural strength. J Dent Res. 1986;65(2):146–148
  3. Kerby RE, Knobloch L. Strength characteristics of glass-ionomer cements. Oper Dent. 1992;17(5):170–174
  4. Nakajima H, Watkins JH, Arita K, Hanaoka K, Okabe T. Mechanical properties of glass ionomers under static and dynamic loading. Dent Mater. 1996;12(1):30–37
  5. Attar N, Tam LE, McComb D. Mechanical and physical properties of contemporary dental luting agents. J Prosthet Dent. 2003;89(2):127–134
  6. Mallmann A, Ataide JC, Amoedo R, Rocha PV, Jacques LB. Compressive strength of glass ionomer cements using different specimen dimensions. Braz Oral Res. 2007;21(3):204–208
  7. Ilie N, Hickel R. Mechanical behavior of glass ionomer cements as a function of loading condition and mixing procedure. Dent Mater J. 2007;26(4):526–533
  8. Wilson AD, McLean JW. Glass-ionomer cement. Chicago: Quintessence; 1988;
  9. Griffin SG, Hill RG. Influence of glass composition on the properties of glass polyalkenoate cements. Part I: influence of aluminium to silicon ratio. Biomaterials. 1999;20(17):1579–1586
  10. Griffin SG, Hill RG. Influence of glass composition on the properties of glass polyalkenoate cements. Part IV: influence of fluorine content. Biomaterials. 2000;21(7):693–698
  11. De Barra E, Hill RG. Influence of alkali metal ions on the fracture properties of glass polyalkenoate (ionomer) cements. Biomaterials. 1998;19(6):495–502
  12. Arita K, Lucas M, Nishino M. The effect of adding hydroxyapatite on the flexure strength of glass cement. Dent Mater J. 2003;22(2):126–136
  13. Ana ID, Matsuya S, Ohta M, Ishikawa K. Effects of added bioactive glass on the setting and mechanical properties of resin-modified glass ionomer cement. Biomaterials. 2003;24(18):3061–3067
  14. Simmons JJ. The miracle mixture: glass ionomer and alloy powder. Tex Dent J. 1983;100(10):6–12
  15. Kerby RE, Bleiholder RF. Physical properties of stainless-steel and silver-reinforced glass-ionomer cements. J Dent Res. 1991;70(10):1358–1361
  16. Gu YW, Yap AUJ, Cheang P, Khor KA. Effects of incorporation of HA/ZrO2 into glass ionomer cement (GIC). Biomaterials. 2005;26(7):713–720
  17. Oldfield CWB, Ellis B. Fibrous reinforcement of glass-ionomer cements. Clin Mater. 1991;7(4):313–323
  18. Lohbauer U, Walker J, Nikolaenko S, Werner J, Clare A, Petschelt A, et al. Reactive fibre reinforced glass ionomer cements. Biomaterials. 2003;24(17):2901–2907
  19. Gu YW, Yap AUJ, Cheang P, Khor KA. Zirconia-glass ionomer cement—a potential substitute for Miracle Mix. Scripta Mater. 2005;52(2):113–116
  20. McLean JW. Glass-ionomer cements. Br Dent J. 1988;164(9):293–300
  21. Crisp S, Lewis BG, Wilson AD. Characterization of glass-ionomer cements. 1. Long term hardness and compressive strength. J Dent. 1976;4(4):162–166
  22. Pearson GJ, Atkinson AS. Long-term flexural strength of glass ionomer cements. Biomaterials. 1991;12(7):658–660
  23. Mitra SB, Kedrowski BL. Long-term mechanical properties of glass ionomers. Dent Mater. 1994;10(2):78–82
  24. Williams JA, Billington RW. Changes in compressive strength of glass ionomer restorative materials with respect to time periods of 24h to 4 months. J Oral Rehabil. 1991;18(2):163–168
  25. Cattani-Lorente M-A, Godin C, Meyer J-M. Mechanical behavior of glass ionomer cements affected by long-term storage in water. Dent Mater. 1994;10(1):37–44
  26. Lawn BR, Deng Y, Thompson VP. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent. 2001;86(5):495–510
  27. Wang Y, Darvell BW. Failure mode of dental restorative materials under Hertzian indentation. Dent Mater. 2007;23(10):1236–1244
  28. Lawn BR, Pajares A, Zhang Y, Deng Y, Polack MA, Lloyd IK, et al. Materials design in the performance of all-ceramic crowns. Biomaterials. 2004;25(14):2885–2892
  29. Leung VW-H, Darvell BW. Artificial salivas for in vitro studies of dental materials. J Dent. 1997;25(6):475–484
  30. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81(6):652–661
  31. Shrotriya P, Wang R, Katsube N, Seghi R, Soboyejo WO. Contact damage in model dental multilayers: An investigation of the influence of indenter size. J Mater Sci-Mater Med. 2003;14(1):17–26
  32. Wang Y, Darvell BW. Failure behaviour of glass ionomer cement under Hertzian indentation. Dent Mater. 2008;24(9):1223–1229
  33. Guazzato M, Albakry M, Ringer S, Swain M. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater. 2004;20(5):449–456
  34. Mount GJ. An atlas of glass-ionomer cements: a clinician's guide. London: Martin Dunitz; 1990;
  35. Algera TJ, Kleverlaan CJ, Prahl-Andersen B, Feilzer AJ. The influence of environmental conditions on the material properties of setting glass-ionomer cements. Dent Mater. 2006;22(9):852–856
  36. Kaplan AE, Williams J, Billington RW, Braden M, Pearson GJ. Effects of variation in particle size on biaxial flexural strength of two conventional glass-ionomer cements. J Oral Rehabil. 2004;31(4):373–378
  37. Crisp S, Lewis BG, Wilson AD. Characterization of glass-ionomer cements. 3. Effect of polyacid concentration on physical properties. J Dent. 1977;5(1):51–56
  38. Crisp S, Lewis BG, Wilson AD. Characterization of glass-ionomer cements. 2. Effect of the powder: liquid ratio on the physical properties. J Dent. 1976;4(6):287–290
  39. Musanje L, Shu M, Darvell BW. Water sorption and mechanical behaviour of cosmetic direct restorative materials in artificial saliva. Dent Mater. 2001;17(5):394–401

PII: S0109-5641(09)00122-5

doi: 10.1016/j.dental.2009.02.006

Dental Materials
Volume 25, Issue 8 , Pages 952-955 , August 2009

Article Tools

* Image Usage & Resolution