Dental Materials
Volume 25, Issue 6 , Pages 781-790 , June 2009

Graded structures for damage resistant and aesthetic all-ceramic restorations

  • Yu Zhang

      Affiliations

    • Corresponding Author InformationCorresponding author at: Department of Biomaterials and Biomimetics, New York University College of Dentistry, 345 East 24th Street, Room 813C, New York, NY 10010, USA. Tel.: +1 212 998 9637; fax: +1 212 995 4244.
    • ,
  • Jae-Won Kim

Received 21 July 2008 ,Revised 22 December 2008 ,Accepted 2 January 2009.

References 

  1. Lawn BR, Deng Y, Thompson VP. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent. 2001;86(November (5)):495–510
  2. Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002;4(1):7–22
  3. Blatz MB, Sadan A, Kern M. Resin–ceramic bonding: a review of the literature. J Prosthet Dent. 2003;89(March (3)):268–274
  4. Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater. 1998;14(January (1)):64–71
  5. Zhang Y, Lawn BR, Malament KA, Van Thompson P, Rekow ED. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont. 2006;19(September–October (5)):442–448
  6. Zhang Y, Lawn BR, Rekow ED, Thompson VP. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B: Appl Biomater. 2004;71(November (2)):381–386
  7. Sailer I, Holderegger C, Jung RE, Suter A, Thievent B, Pietrobon N, et al. Clinical study of the color stability of veneering ceramics for zirconia frameworks. Int J Prosthodont. 2007;20(May–June (3)):263–269
  8. Jitcharoen J, Padture NP. Hertzian–Crack suppression in ceramics with elastic-modulus-graded surfaces. J Am Ceram Soc. 1998;81(9):2301–2308
  9. Suresh S, Giannakopoulos AE, Alcala J. Spherical indentation of compositionally graded materials: theory and experiments. Acta Mater. 1997;45(4):1307–1321
  10. Pender DC, Padture NP, Giannakopoulos AE, Suresh S. Gradients in elastic modulus for improved contact-damage resistance: Part I. The silicon nitride–oxynitride glass system. Acta Mater. 2001;49(16):3255–3262
  11. Suresh S, Olsson M, Giannakopoulos AE, Padture NP, Jitcharoen J. Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces. Acta Mater. 1999;47(14):3915–3926
  12. Kingery WD, Bowen HK, Uhlmann DR. Introduction to ceramics. Second ed.. New York: John Wiley; 1976;
  13. Piascik JR, Thompson JY, Bower CA, Stoner BR. Stress evolution as a function of substrate bias in rf magnetron sputtered yttria-stabilized zirconia films. J Vac Sci Technol A. 2006;24(July–August (4)):1091–1095
  14. Chevalier J. What future for zirconia as a biomaterial?. Biomaterials. 2006;27:534–543
  15. Chevalier J, Cales B, Drouin JM. Low-temperature aging of Y-YZP ceramics. J Am Ceram Soc. 1999;82(8):2150–2154
  16. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials. 1999;20(January (1)):1–25
  17. Oliver WC, Pharr GM. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–1583
  18. Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19(1):3–20
  19. Zhang Y, Kim JW, Bhowmick S, Thompson VP, Rekow ED. Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B: Appl Biomater. May 13, 2008;[published online]
  20. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81(6):652–661
  21. Lawn BR, Bhowmick S, Bush MB, Qasim T, Rekow ED, Zhang Y. Failure modes in ceramic-based layer structures: a basis for materials design of dental crowns. J Am Ceram Soc. 2007;90(6):1671–1683
  22. Lawn BR, Deng Y, Miranda P, Pajares A, Chai H, Kim DK. Overview: damage in brittle layer structures from concentrated loads. J Mater Res. 2002;17(12):3019–3036
  23. Zhang Y, Lawn B. Long-term strength of ceramics for biomedical applications. J Biomed Mater Res B: Appl Biomater. 2004;69(May (2)):166–172
  24. Zhang Y, Pajares A, Lawn BR. Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems. J Biomed Mater Res B: Appl Biomater. 2004;71(October (1)):166–171
  25. Kim JW, Bhowmick S, Hermann I, Lawn BR. Transverse fracture of brittle bilayers: relevance to failure of all-ceramic dental crowns. J Biomed Mater Res B: Appl Biomater. 2006;79(October (1)):58–65
  26. Dong JK, Luthy H, Wohlwend A, Scharer P. Heat-pressed ceramics: technology and strength. Int J Prosthodont. 1992;5(January–February (1)):9–16
  27. Luthy H, Dong JK, Wohlwend A, Scharer P. Effects of veneering and glazing on the strength of heat-pressed ceramics. Schweiz Monatsschr Zahnmed. 1993;103(10):1257–1260
  28. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent. 2007;98(5):379–388
  29. Sundh A, Molin M, Sjogren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater. 2005;21:476–482
  30. Vult von Steyern P, Ebbesson S, Holmgren J, Haag P, Nilner K. Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermocycling. J Oral Rehabil. 2006;33(September (9)):682–689
  31. Zhang Y, Lawn BR. Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws. J Biomed Mater Res B: Appl Biomater. 2005;72(February (2)):388–392
  32. Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent. 2000;2(Summer (2)):139–147
  33. Krejci I, Albert P, Lutz F. The influence of antagonist standardization on wear. J Dent Res. 1999;78(February (2)):713–719

PII: S0109-5641(09)00002-5

doi: 10.1016/j.dental.2009.01.002

Dental Materials
Volume 25, Issue 6 , Pages 781-790 , June 2009

Article Tools

* Image Usage & Resolution