Dental Materials
Volume 25, Issue 5 , Pages 621-628 , May 2009

Effects of residual ethanol on the rate and degree of conversion of five experimental resins

  • Milena Cadenaro

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Italy
    • ,
  • Lorenzo Breschi

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Italy
    • Department of Biomedicine, University of Trieste + IGM-CNR, Unit of Bologna, c/o IOR, Bologna, Italy
    • ,
  • Frederick A. Rueggeberg

      Affiliations

    • Division of Dental Materials Sciences, Department of Oral Rehabilitation, School of Dentistry, Medical College of Georgia, Augusta, GA, USA
    • ,
  • Michael Suchko

      Affiliations

    • Department of Oral Biology, School of Dentistry, Medical College of Georgia, 1129 15th Street, Augusta, GA 30912-1129, USA
    • ,
  • Evan Grodin

      Affiliations

    • Department of Oral Biology, School of Dentistry, Medical College of Georgia, 1129 15th Street, Augusta, GA 30912-1129, USA
    • ,
  • Kelli Agee

      Affiliations

    • Department of Oral Biology, School of Dentistry, Medical College of Georgia, 1129 15th Street, Augusta, GA 30912-1129, USA
    • ,
  • Roberto Di Lenarda

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Italy
    • ,
  • Franklin R. Tay

      Affiliations

    • Department of Endodontics, School of Dentistry, Medical College of Georgia, Augusta, GA, USA
    • ,
  • David H. Pashley

      Affiliations

    • Department of Oral Biology, School of Dentistry, Medical College of Georgia, 1129 15th Street, Augusta, GA 30912-1129, USA
    • Corresponding Author InformationCorresponding author. Tel.: +1 706 721 2033; fax: +1 706 721 6252.

Received 15 September 2008 ,Revised 11 November 2008 ,Accepted 15 November 2008.

References 

  1. Cho B, Dickens S. Effects of acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater. 2004;20:107–115
  2. Cadenaro M, Breschi L, Antoniolli F, Tay FR, Di Lenarda R, Pashley D. Degree of conversion of resin blends in relation to ethanol content and hydrophilicity. Dent Mater. 2008;24:1194–1200
  3. Hashimoto M, Tay FR, Ito S, Sano H, Kaga M, Pashley DH. Permeability of adhesive resin films. J Biomed Mater Res B: Appl Biomater. 2005;74B:699–705
  4. Ikeda T, De Munck J, Shirai K, Hikita K, Inoue S, Sano H, et al. Effect of evaporation of primer components on ultimate tensile strengths of primer-adhesive mixture. Dent Mater. 2005;21:1051–1058
  5. Klein-Júnior CA, Zander-Grande C, Amaral R, Stanislawczuk R, Garcia EJ, Baumhardt-Neto R, et al. Evaporating solvents with warm air-stream: effects on adhesive layer properties and resin-dentin bond strengths. J Dent. 2008;36:618–625
  6. Dickens SH, Cho B-H. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analysis of flexural and microtensile bond strengths of bonding agents. Dent Mater. 2005;21:354–364
  7. Jacobsen T, Söderholm FJ. Some effects of water on dentin bonding. Dent Mater. 1995;11:132–136
  8. Paul SJ, Leach M, Rueggeberg FA, Pashley DH. Effect of water content on the physical properties of model dentin primer and bonding resins. J Dent. 1999;27:209–214
  9. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials. 2005;26:6449–6459
  10. Hosaka K, Tagami J, Nishitani Y, Yoshiyama M, Carrilho M, Tay FR, et al. Effect of wet versus dry testing on the mechanical properties of hydrophilic primer polymers. Eur J Oral Sci. 2007;115:1–7
  11. Perdigão J, Swift EJ, Lopes G. Effects of repeated use on bond strength of one-bottle adhesives. Quintessence Int. 1999;30:19–23
  12. Craig R, Powers J. Restorative dental materials. 11th ed.. Mosby: St. Louis; 2002;p. 126–53
  13. Craig R, Powers J. Restorative dental materials. 11th ed.. Mosby: St. Louis; 2002;p. 260–85
  14. Ye Q, Wang Y, Williams K, Spencer P. Characterization of photopolymerization of dental adhesives as a function of light source and irradiance. J Biomed Mater Res B: Appl Biomater. 2007;80B:440–446
  15. Pashley EL, Zhang Y, Lockwood P, Rueggeberg F, Pashley DH. Effects of HEMA on water evaporation from water–HEMA mixtures. Dent Mater. 1998;14:6–10
  16. Ruyter IE, Svendsen SA. Remaining methacrylate groups in composite restorative materials. Acta Odontol Scand. 1978;36:75–82
  17. Eliades CC, Vongiouklakis CJ, Caputo AA. Degree of double bond conversion in light-cured composites. Dent Mater. 1987;3:19–25
  18. Rueggeberg FA, Craig R. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res. 1988;67:932–937
  19. Rueggeberg FA, Hashinger DT, Fairhurst CW. Calibration of FTIR conversion analysis of contemporary dental resin composites. Dent Mater. 1990;6:241–249
  20. Ye Q, Spencer P, Wang Y, Misra A. Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives. J Biomed Mater Res. 2007;80A:342–350
  21. Sadr A, Shimada Y, Tagami J. Effects of solvent drying time on microshear bond strength and mechanical properties of two self-etching adhesive systems. Dent Mater. 2007;23:1114–1119
  22. Yiu CKY, Pashley EL, Hiraishi N, King NM, Goracci C, Ferrari M, et al. Solvent and water retention in dental adhesive blends after evaporation. Biomaterials. 2005;26:6863–6872
  23. Holmes RG, Rueggeberg FA, Callan RS, Caughman F, Chan DCN, Pashley DH, et al. Effect of solvent type and content on monomer conversion of a model resin system as a thin film. Dent Mater. 2007;23:1506–1512
  24. Fujibayashi K, Ishimaru K, Takahashi N, Kohno A. Newly developed curing unit using blue light-emitting diodes. Dent Jpn. 1998;34:49–53
  25. Asmussen E, Peutzfeldt A. Temperature rise induced by some light emitting diode and quartz–tungsten–halogen curing units. Eur J Oral Sci. 2005;113:96–98
  26. Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J. 1999;186:388–391
  27. Nomoto R. Effect of light wavelength on polymerization of light-cured resins. Dent Mater. 1997;16:60–73
  28. Tsai PC, Meyers IA, Walsh LJ. Depth of cure and surface microhardness of composite resin cured with blue LED curing lights. Dental Mater. 2004;20:364–369
  29. Haitz RH, Craford MG, Weissman RH . Light emitting diodes. In:  Bass M editors. Handbook of optics. 2nd ed.. 1995;p. 121–129
  30. Clinical Research Associates . Resin curing lights, LED. CRA Newslett. 2001;1–2
  31. Bala O, Olmez A, Kalayci S. Effect of LED and halogen light curing on polymerization of resin-based composites. J Oral Rehabil. 2005;32:134–140
  32. Soh MS, Yap AU, Yu T, Shen ZX. Analysis of the degree of conversion of LED and halogen lights using micro-Raman spectroscopy. Oper Dent. 2004;29(September–October (5)):571–577
  33. Wiggins KM, Hartung M, Althoff O, Wastian C, Mitra SB. Curing performance of a new-generation light-emitting diode dental curing unit. J Am Dent Assoc. 2004;135:1471–1479
  34. Nakfoor B, Yaman P, Dennison J, Herrero A. Effect of a light-emitting diode on composite polymerization shrinkage and hardness. J Esthet Restor Dent. 2005;17:110–116
  35. Breschi L, Cadenaro M, Antoniolli F, Sauro S, Biasotto M, Prati C, et al. Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability. Dent Mater. 2007;23:1066–1072
  36. Cadenaro M, Antoniolli F, Sauro S, Tay FR, Di Lenarda R, Prati C, et al. Degree of conversion and permeability of dental adhesives. Eur J Oral Sci. 2005;113:525–530

PII: S0109-5641(08)00276-5

doi: 10.1016/j.dental.2008.11.005

Dental Materials
Volume 25, Issue 5 , Pages 621-628 , May 2009

Article Tools

* Image Usage & Resolution