Dental Materials
Volume 25, Issue 4 , Pages 452-458 , April 2009

Effect of photoinitiators on the in vitro performance of a dentin adhesive exposed to simulated oral environment

  • Qiang Ye

      Affiliations

    • Bioengineering Research Center, The University of Kansas School of Engineering, Lawrence, KS, USA
    • Department of Mechanical Engineering, The University of Kansas, Lawrence, KS, USA
    • ,
  • Jonggu Park

      Affiliations

    • Bioengineering Research Center, The University of Kansas School of Engineering, Lawrence, KS, USA
    • Department of Mechanical Engineering, The University of Kansas, Lawrence, KS, USA
    • ,
  • Elizabeth Topp

      Affiliations

    • Department of Pharmaceutical Chemistry, The University of Kansas, Lawrence, KS, USA
    • ,
  • Paulette Spencer

      Affiliations

    • Bioengineering Research Center, The University of Kansas School of Engineering, Lawrence, KS, USA
    • Department of Mechanical Engineering, The University of Kansas, Lawrence, KS, USA
    • Corresponding Author InformationCorresponding author at: Bioengineering Research Center, University of Kansas School of Engineering, Learned Hall, 1530 W. 15th Street, Room 3111, Lawrence, KS 66045-7609, United States. Tel.: +1 785 864 8140; fax: +1 785 864 1742.

Received 24 April 2008 ,Revised 20 August 2008 ,Accepted 29 September 2008.

References 

  1. Reis AF, Giannini M, Pereira PN. Long-term TEM analysis of the nanoleakage patterns in resin–dentin interfaces produced by different bonding strategies. Dent Mater. 2007;23(9):1164–1172
  2. Tay FR, Gwinnett AJ, Pang KM, Wei SHY. An optical, micromorphological study of surface moisture in the total etched resin–dentin interface. Am J Dent. 1996;9:43–48
  3. Tay FR, Gwinnett AJ, Wei SHY. Micromophological spectrum from overdrying to overwetting acid-conditioned dentin in water-free, acetone-based, single-bottle primer/adhesives. Dent Mater. 1996;12:236–244
  4. Yiu CK, Pashley EL, Hiraishi N, King NM, Goracci C, Ferrari M, et al. Solvent and water retention in dental adhesive blends after evaporation. Biomaterials. 2005;26(34):6863–6872
  5. Zhang ZX, Huang C, Zheng TL, Wang S, Cheng XR. Effects of residual water on microtensile bond strength of one-bottle dentin adhesive systems with different solvent bases. Chin Med J (Engl). 2005;118(19):1623–1628
  6. Spencer P, Wang Y. Adhesive phase separation at the dentin interface under wet bonding conditions. J Biomed Mater Res. 2002;62(3):447–456
  7. Wang Y, Spencer P, Yao X, Ye Q. Effect of co-initiator and water on the photoreactivity and photopolymerization of HEMA/camphoroquinone-based reactant mixtures. J Biomed Mater Res. 2006;78A(3):580–587
  8. Nakanuma K. Studies on the development of hydrophilic photocurable dentin bonding agents—the effect of QTX-DMAEMA system. J Jpn Conserv Dent. 1993;36:315–330
  9. Pappas SP. UV curing science and technology. Norwalk, CT: Technology Marketing Corp.; 1978;
  10. Fouassier JP. Photoinitiation, photopolymerization, and photocuring. Cincinati, OH: Hanser-Gardner; 1995;
  11. Green WA. Water soluble photoinitiators: a review. Eur Coat J. 1994;5:274–291
  12. Davis MJ, Gawne G, Green PN, Green WA. The synthesis and properties of a novel series of water soluble thioxanthone photoinitiators. Polym Paint Colour J. 1985;176:536–545
  13. Hayakawa T, Horie K. Effect of water-soluble photoinitiator on the adhesion between composite and tooth substrate. Dent Mater. 1992;8(6):351–353
  14. Hayakawa T, Nemoto K, Horie K. Adhesion of composite to polished dentin retaining its smear layer. Dent Mater. 1995;11(3):218–222
  15. Hayakawa T, Kikutake K, Nemoto K. Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel. Dent Mater. 1998;14(2):99–105
  16. Kikutake-Sugiyama K. Development of one step adhesive system using photo curing self-etching primer. J Jpn Dent Mater. 1999;18:151–169
  17. Nakanuma K, Hayakawa T, Tomita T, Yamazaki M. Effect of the application of dentin primers and a dentin bonding agent on the adhesion between the resin-modified glass-ionomer cement and dentin. Dent Mater. 1998;14(4):281–286
  18. Hayakawa T, Kikutake-Sugiyama K, Nemoto K. Efficacy of water-soluble photoinitiator on the adhesion of composite resin to bovine teeth in all-in-one bonding system. Dent Mater J. 2005;24(2):213–218
  19. Hayakawa T, Kikutake-Sugiyama K, Fukushima T, Nemoto K. Development of self-etching primer adhesive in all-in-one bonding system. Dent Mater J. 2005;24(2):251–256
  20. Fouassier JP, Ruhlmann D, Graff B, Takimoto Y, Kawabata M, Harada M. A new 3-component system in visible laser-light photoinduced polymerization. J Imaging Sci Technol. 1993;37(2):208–210
  21. Padon KS, Scrantion AB. Recent research developments in polymer science. Trivandrum, India: Transworld Research Network; 1999;369–385
  22. Ye Q, Spencer P, Wang Y. Nanoscale patterning in crosslinked methacrylate copolymer networks: an atomic force microscopy study. J Appl Polym Sci. 2007;106:3843–3851
  23. Ye Q, Wang Y, Spencer P. Nanophase separation in polymers exposed to simulated oral environment. J Biomed Mater Res Appl Biomater. 2008;88B:339–348
  24. Ye Q, Park JG, Topp E, Wang Y, Misra A, Spencer P. Effect of nanophase separation on dentin adhesive durability. J Dent Res. 2008;87:829–833
  25. Ye Q, Spencer P, Wang Y, Misra A. Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives. J Biomed Mater Res A. 2007;80(2):342–350
  26. Ye Q, Wang Y, Williams K, Spencer P. Characterization of photopolymerization of dentin adhesives as a function of light source and irradiance. J Biomed Mater Res Appl Biomater. 2007;80B:440–446
  27. Nunes MF, Swift EJ, Perdigao J. Effects of adhesive composition on microtensile bond strength to human dentin. Am J Dent. 2001;14:340–343
  28. Jacobsen T, Soderholm K-J. Some effects of water on dentin bonding. Dent Mater. 1995;11:132–136
  29. Pereira PNR, Okuda M, Nakajima M, Sano H, Tagami J, Pashley DH. Relationship between bond strengths and nanoleakage: evaluation of a new assessment method. Am J Dent. 2001;14:100–104
  30. Paul SJ, Leach M, Rueggeberg FA, Pashley DH. Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent. 1999;27:209–214
  31. Aydin M, Arsu N, Yagci Y. One-component bimolecular photoinitiating systems. 2. Thioxanthone acetic acid derivatives as photoinitiators for free radical polymerization. Macromol Rapid Commun. 2003;24(12):718–723
  32. Corrales T, Peinado C, Catalina F, Neumann MG, Allen NS, Rufs AM, et al. Photopolymerization of methyl methacrylate initiated by thioxanthone derivatives: photoinitiation mechanism. Polymer. 2000;41(26):9103–9109
  33. Valderas C, Bertolotti S, Previtali CM, Encinas MV. Influence of the amine structure on the polymerization of methyl methacrylate photoinitiated by aromatic ketone/amine. J Polym Sci A-Polym Chem. 2002;40(16):2888–2893
  34. Cokbaglan L, Arsu N, Yagci Y, Jockusch S, Turro NJ. 2-Mereaptothioxanthone as a novel photoinitiator for free radical polymerization. Macromolecules. 2003;36(8):2649–2653
  35. Yang JW, Zeng ZH, Chen YL. Amine-linked thioxanthones as water-compatible photoinitiators. J Polym Sci A-Polym Chem. 1998;36(14):2563–2570
  36. Ferreira GC, Schmitt CC, Neumann MG. Dependence of the thioxanthone triplet–triplet absorption spectrum with solvent polarity and aromatic ring substitution. J Braz Chem Soc. 2006;17(5):905–909

PII: S0109-5641(08)00238-8

doi: 10.1016/j.dental.2008.09.011

Dental Materials
Volume 25, Issue 4 , Pages 452-458 , April 2009

Article Tools

* Image Usage & Resolution