Dental Materials
Volume 25, Issue 3 , Pages 353-359, March 2009

Electrolytic deposition of lithium into calcium phosphate coatings

  • Jiawei Wang

      Affiliations

    • Key Lab for Oral Biomedical Engineering of Ministry of Education, School & Hospital of Stomatology, Wuhan University, 237 Luoyu Road, Wuhan 430079, People's Republic of China
    • Institute for Biomedical Technology, Department of Tissue Regeneration, University of Twente, Enschede, The Netherlands
    • Corresponding Author InformationCorresponding author at: Key Lab for Oral Biomedical Engineering of Ministry of Education, School & Hospital of Stomatology, Wuhan University, 237 Luoyu Road, Wuhan 430079, People's Republic of China. Tel.: +86 27 87654295; fax: +86 27 87873260.
  • ,
  • Klaas de Groot

      Affiliations

    • Institute for Biomedical Technology, Department of Tissue Regeneration, University of Twente, Enschede, The Netherlands
  • ,
  • Clemens van Blitterswijk

      Affiliations

    • Institute for Biomedical Technology, Department of Tissue Regeneration, University of Twente, Enschede, The Netherlands
  • ,
  • Jan de Boer

      Affiliations

    • Institute for Biomedical Technology, Department of Tissue Regeneration, University of Twente, Enschede, The Netherlands

Received 8 February 2008; accepted 21 July 2008.

Abstract 

Objectives

Lithium ions stimulate the Wnt signaling pathway and the authors previously demonstrated that lithium enhances the proliferation of tissue cultured human mesenchymal stem cells. The aim of this study was to prepare and characterize a calcium phosphate/lithium coating by means of electrolytic deposition. It was hypothesized that the hybrid coatings would enhance the proliferation of MG63 osteoblast-like cells in vitro.

Methods

Calcium phosphate coatings were electrolytically deposited in electrolytes containing 0, 0.5 and 5g/L lithium chloride, respectively. They were characterized by scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The coating thickness, lithium content and release profile were also measured. The cell attachment and cell-doubling index of MG63 cells on these coatings were determined through a Cell Counting Kit-8.

Results

Lithium inhibited calcium phosphate deposition in a dose-dependent manner. Both crystallinity and thickness of the coatings were reduced with increasing lithium concentration in the electrolyte. The incorporation of lithium was 2.2 and 5.5μg/mg, respectively. The hybrid coatings demonstrated a burst lithium release within half an hour upon immersion into simulated physiological solution. Both attachment and early proliferation of MG63 cells on these hybrid coatings were enhanced.

Significance

These results suggest that lithium can be effectively incorporated into calcium phosphate coatings. The incorporation of lithium interferes with calcium phosphate deposition; however, it enhances the biocompatibility of the coatings.

Keywords: Electrolytic deposition, Lithium, Calcium phosphate coating, MG63 cells, Cell proliferation

To access this article, please choose from the options below

Login to an existing account or Register a new account.

  • Purchase this article for 31.50 USD (You must login/register to purchase this article)

    Online access for 24 hours. The PDF version can be downloaded as your permanent record.

  • Subscribe to this title

    Get unlimited online access to this article and all other articles in this title 24/7 for one year.

  • Claim access now

    For current subscribers with Society Membership or Account Number.

  • Visit SciVerse ScienceDirect to see if you have access via your institution.
 

PII: S0109-5641(08)00216-9

doi:10.1016/j.dental.2008.07.013

Dental Materials
Volume 25, Issue 3 , Pages 353-359, March 2009