Dental Materials
Volume 25, Issue 3 , Pages 339-347 , March 2009

PMMA-grafted nanoclay as novel filler for dental adhesives

  • Mohammad Atai

      Affiliations

    • Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran
    • Corresponding Author InformationCorresponding author. Tel.: +98 21 44580085; fax: +98 21 44580023.
    • ,
  • Laleh Solhi

      Affiliations

    • Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran
    • ,
  • Azizollah Nodehi

      Affiliations

    • Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran
    • ,
  • Seyed Mojtaba Mirabedini

      Affiliations

    • Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran
    • ,
  • Shahin Kasraei

      Affiliations

    • Dental Research Center, Hamadan University of Medical Sciences, Hamadan, Iran
    • ,
  • Khatereh Akbari

      Affiliations

    • Dental Research Center, Hamadan University of Medical Sciences, Hamadan, Iran
    • ,
  • Samal Babanzadeh

      Affiliations

    • Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran

Received 29 March 2008 ,Revised 8 July 2008 ,Accepted 6 August 2008.

References 

  1. Gaengler P, Hoyer I, Montag R, Gaebler P. Micromorphological evaluation of posterior composite restorations: a 10-year report. J Oral Rehab. 2004;31(10):991–1000
  2. Opdam NJ, Loomans BA, Roeters FJ, Bronkhorst EM. Five-year clinical performance of posterior resin composite restorations placed by dental students. J Dent. 2004;32(5):379–383
  3. Van Landuyt KL, Snauwaert J, Munck JD, Peumans M, Yoshida Y, Poitevin A, et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;28:3757–3785
  4. Leloup G, D’Hoore W, Bouter D, Degrange M, Vreven J. Meta-analytical review of factors involved in dentin adherence. J Dent Res. 2001;80(7):1605–1614
  5. Fonseca RB, Haiter-Neto F, Fernandes-Neto AJ, Seabra Barbosa GA, Soares CJ. Radiodensity of enamel and dentin of human, bovine and swine teeth. Arch Oral Biol. 2004;49(11):919–922
  6. Mannocci F, Pilecki P, Bertelli E, Watson TF. Density of dentinal tubules affects the tensile strength of root dentin. Dent Mater. 2004;20(3):293–296
  7. Wang RZ, Weiner S. Strain-structure relations in human teeth using Moiré fringes. J Biomech. 1997;31(2):135–141
  8. Nakabayashi N, Ashizawa M, Nakamura M. Identification of a resin–dentin hybrid layer in vital human dentin created in vivo: durable bonding to vital dentin.. Quintessence Int. 1992;23:135–141
  9. Van Meerbeek B, Yoshida Y, Snauwaert J, Hellemans L, Lambrechts P, Vanherle G, et al. Hybridization effectiveness of a two step versus a three step smear layer removing adhesive system examined correlatively by TEM and AFM. J Adhes Dent. 1999;1:7–23
  10. Lopes M, Perdigão J, Ambrose WW. Ultramorphological study of dentin treated with a simplified adhesive. J Dent Res. 1999;78:475
  11. Kanca J. Resin bonding to wet substrate. I. Bonding to dentin. Quintessence Int. 1992;23:39–41
  12. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. Biomed Mater Res. 1992;16:265–273
  13. Frankenberger R, Sindel J, Krämer N, Petschelt A. Dentin bond strength and marginal adaptation: direct composite resins vs. ceramic inlays. Oper Dent. 1999;24:147–155
  14. Van Meerbeek B, Williams G, Cellis JP. Assessment by nano-indentation of hardness and elasticity of the resin–dentin bonding area. J Dent Res. 1993;72:1434–1442
  15. Sano H, Takatsu T, Ciucchi B, Russel CM, Pashley DH. Tensile properties of resin-infiltrated demineralized human dentin. J Dent Res. 1995;74:1093–1102
  16. Kim JS, Cho BH, Lee IB, Um CM, Lim BS, Oh MH, et al. Effect of the hydrophilic nanofiller loading on the mechanical properties and the microtensile bond strength of an ethanol-based one bottle dentin adhesive. J Biomed Mater Res Pt B: Appl Biomater. 2005;72B(2):284–291
  17. Cho BH, Dickens SH, Bae JH, Chang CG, Son HH, Um CM. Effect of interfacial bond quality on the direction of polymerization shrinkage flow in resin composite restorations. Oper Dent. 2002;27:297–304
  18. Dickens SH, Cho BH. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strength of bonding agents. Dent Mater. 2005;21(4):354–364
  19. Miyazaki M, Ando S, Hinoura K, Onose H, Moore BK. Influence of filler addition to bonding agents on shear bond strength to bovine dentin. Dent Mat. 1995;11:234–238
  20. Nunes MF, Swift EJJR, Perdiago J. Effect of adhesive composition on microtensile bond strength to human dentin. Am J Dent. 2001;14:340–343
  21. Montes MA, de Goes MF, Cunha MR, Soares AB. A morphological and tensile bond strength evaluation of an unfilled adhesive with low viscosity composites and a filled adhesive in one and two coats. J Dent. 2001;29:435–441
  22. Okada A, Kawasumi M, Usuki A, Kojima Y, Kurauchi T, Kamigaito O. Nylon-clay nanocomposites. In: Proceedings of material research society. 1990;
  23. Cho JW, Paul DR. Nylon 6 nanocomposites by melt compounding. Polymer. 2001;42:1083–1094
  24. Subramaniyan AK, Sun CT. Toughening polymeric composites using nanoclay: crack tip scale effects on fracture toughness. Compos: Part A. 2007;38:34–43
  25. Ueda J, Gang W, Shirai K, Yamauchi T, Tsubokawa N. Cationic graft polymerization onto silica nanoparticle surface in a solvent-free dry-system. Polym Bull, published online: 19 January 2008.
  26. Sadr A, Shimada Y, Tagami J. Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems. Dent Mater. 2007;23(9):1114–1119
  27. Choi YS, Choi MH, Wang KH, Kim SO, Kim YK, Chung IJ. Synthesis of exfoliated PMMA/Na-MMT nanocomposites via soap free emulsion polymerization. Macromolecules. 2001;34:8978–8985
  28. Choi YS, Wang KH, Xu M, Chung IJ. Synthesis of exfoliated polyacrylonitrile/Na-MMT nanocomposites via emulsion polymerization. Chem Mater. 2002;14:2936–2939
  29. Kim YK, Choi YS, Wang KH, Chung IJ. Synthesis of exfoliated PS/Na-MMT nanocomposites via emulsion polymerization. Chem Mater. 2002;14:4990–4995
  30. Pavia DL, Lampman GM, Kriz GS. Introduction to spectroscopy. 3rd ed.. Brooks/Cole Publishing Co.; 2000;
  31. Golebiewski J, Galeski A. Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA. Compos Sci Technol. 2007;67(15–16):3442–3447
  32. Placido E, Meira JBC, Lima RG, Muench A, de Souza RM, Ballester RY. Shear versus micro-shear bond strength test: a finite element stress analysis. Dent Mater. 2007;23(9):1086–1092
  33. McDonough WG, Antonucci JM, He J, Shimada Y, Chiang MYM, Schumacher GE, et al. A microshear test to measure bond strengths of dentin–polymer interfaces. Biomaterials. 2002;23:3603–3608

PII: S0109-5641(08)00214-5

doi: 10.1016/j.dental.2008.08.005

Dental Materials
Volume 25, Issue 3 , Pages 339-347 , March 2009

Article Tools

* Image Usage & Resolution