Dental Materials
Volume 25, Issue 3 , Pages 321-325 , March 2009

Temperature change in pulp cavity in vitro during the polymerization of provisional resins

  • Giuseppe Chiodera

      Affiliations

    • Dental School, University of Brescia, Piazza Spedali Civili 1, 25100 Brescia, Italy
  • ,
  • Giorgio Gastaldi

      Affiliations

    • Dental School, University of Brescia, Piazza Spedali Civili 1, 25100 Brescia, Italy
  • ,
  • Brian J. Millar

      Affiliations

    • Primary Dental Care, King's College London Dental Institute at Guy's, King's and St Thomas’ Hospitals, Caldecot Road, London SE5 9RW, United Kingdom
    • Corresponding Author InformationCorresponding author. Tel.: +44 20 7346 3585; fax: +44 20 7346 3826.

Received 10 April 2007 ,Revised 3 August 2008 ,Accepted 7 August 2008.

References 

  1. Zollner A, Gaengler P. Pulp reactions to different preparation techniques on teeth exhibiting periodontal disease. J Oral Rehabil. 2000;27:93–102
  2. Saunders WP, Saunders EM. Prevalence of periradicular periodontitis associated with crowned teeth in an adult Scottish subpopulation. Br Dent J. 1998;185:137–140
  3. Camps J, Dejou J, Remusat M, About I. Factors influencing pulpal response to cavity restorations. Dent Mater. 2000;16:432–440
  4. Murray PE, Smith AJ, Windsor LJ, Mjor IA. Remaining dentine thickness and human pulp responses. Int Endod J. 2003;36:33–43
  5. Stanley HR. Dental iatrogenesis. Int Dent J. 1994;44:3–18
  6. Pameijer CH, Stanley HR, Ecker G. Biocompatibility of a glass ionomer luting agent. 2. Crown cementation. Am J Dent. 1991;4:134–141
  7. Castelnuovo J, Tjan AH. Temperature rise in pulpal chamber during fabrication of provisional resinous crowns. J Pros Dent. 1997;78:441–446
  8. Whalen S, Bouschlicher M. Intrapulpal temperature increases with temporary crown and bridge materials. Gen Dent. 2003;(November/December):534–537
  9. Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Path. 1983;19:515–530
  10. Baldissara P, Catapano S, Scotti R. Clinical and histological evaluation of thermal injury thresholds in human teeth: a preliminary study. J Oral Rehabil. 1997;24:791–801
  11. Kim S, Watts DC. Exotherm behaviour of the polymer-based provisional crown and bridge partial denture materials. Dent Mater. 2004;20:383–387
  12. Lieu C, Nguyen T, Payant L. In vitro comparison of peak polymerisation temperatures of 5 provisional restoration resins. J Can Dent Assoc. 2001;67:36–39
  13. Moriyama EH, Zangaro RA, Lobo PD, Villaverde AB, Pacheco MT, Watanabe IS, et al. Optothermal transfer simulation in laser-irradiated human dentin. J Bio Optics. 2003;8:298–302
  14. Seka W, Fried D, Featherstone JD, Borzillary SF. Light deposition in dental hard tissue and simulated thermal response. J Dent Res. 1995;74:1086–1092
  15. Pinheiro AL, Browne RM, Frame JW, Matthews JB. Assessment of thermal damage in precooled CO2 laser wounds using biological markers. Br J Oral Maxillofac Surg. 1993;31:239–243
  16. Miserendino LJ, Abt E, Wigdor H, Miserendino CA. Evaluation of thermal cooling mechanisms for laser application to teeth. Laser Surg Med. 1993;13:83–88
  17. Millar BJ, Louca C, Davies BR. Effect of electrosurgery and laser gingivoplasty on the temperature of pulp, bone and gingivae in vitro. J Oral Laser Appl. 2006;6:259–263
  18. Gluskin AH, Ruddle CJ, Zinman EJ. Thermal injury through intraradicular heat transfer using ultrasonic devices: precautions and practical preventive strategies. J Am Dent Assoc. 2005;136:1286–1293
  19. Uysal T, Eldeniz AU, Usumez S, Usumez A. Thermal changes in the pulp chamber during different adhesive clean-up procedures. Angle Ortho. 2005;75:220–225
  20. Asmussen E, Peutzfeldt A. Temperature rise induced by some light emitting diode and quartz–tungsten-halogen curing units. Eur J Oral Sci. 2005;113:96–98
  21. Sulieman M, Addy M, Rees JS. Surface and intra-pulpal temperature rises during tooth bleaching: an in vitro study. Br Dent J. 2005;199:37–40
  22. Nammour S, Rocca JP, Keiani K, Balestra C, Snoeck T, Powell L, et al. Pulpal and periodontal temperature rise during KTP laser use as a root planing complement in vitro. Photomed Laser Surg. 2005;23:10–14

PII: S0109-5641(08)00211-X

doi: 10.1016/j.dental.2008.08.006

Dental Materials
Volume 25, Issue 3 , Pages 321-325 , March 2009