Dental Materials
Volume 25, Issue 1 , Pages 13-19 , January 2009

The viscoelastic behavior of dental adhesives: A nanoindentation study

  • Alireza Sadr

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Sciences, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-ku, Tokyo 113-8549, Japan
    • Corresponding Author InformationCorresponding author. Tel.: +81 3 5803 5483; fax: +81 3 5803 0195.
    • ,
  • Yasushi Shimada

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Sciences, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-ku, Tokyo 113-8549, Japan
    • ,
  • Hongbing Lu

      Affiliations

    • School of Mechanical and Aerospace Engineering, Oklahoma State University, Stillwater, OK 74078, USA
    • ,
  • Junji Tagami

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Sciences, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-ku, Tokyo 113-8549, Japan
    • Center of Excellence Program for Frontier Research on Molecular Destruction and Reconstruction of Tooth and Bone, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-ku, Tokyo 113-8549, Japan

Received 7 December 2007 ,Revised 15 April 2008 ,Accepted 8 May 2008.

References 

  1. Takahashi A, Sato Y, Uno S, Pereira PN, Sano H. Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater. 2002;18:263–268
  2. Van Meerbeek B, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P, et al. Assessment by nano-indentation of the hardness and elasticity of the resin–dentin bonding area. J Dent Res. 1993;72:1434–1442
  3. Yuan Y, Shimada Y, Ichinose S, Sadr A, Tagami J. Effects of dentin characteristics on interfacial nanoleakage. J Dent Res. 2007;86:1001–1006
  4. Watts DC. Elastic moduli and visco-elastic relaxation. J Dent. 1994;22:154–158
  5. el Hejazi AA, Watts DC. Creep and visco-elastic recovery of cured and secondary-cured composites and resin-modified glass-ionomers. Dent Mater. 1999;15:138–143
  6. Braga RR, Ballester RY, Ferracane JL. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater. 2005;21:962–970
  7. Papadogiannis Y, Lakes RS, Palaghias G, Helvatjoglu-Antoniades M, Papadogiannis D. Fatigue of packable dental composites. Dent Mater. 2007;23:235–242
  8. Sadr A, Shimada Y, Tagami J. Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems. Dent Mater. 2007;23:1114–1119
  9. Oliver WC, Pharr GM. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7:1564–1583
  10. Hosoya Y. Hardness and elasticity of bonded carious and sound primary tooth dentin. J Dent. 2006;34:164–171
  11. Sneddon IN. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int J Eng Sci. 1965;3:47–57
  12. Montgomery T, Shaw WJM. Viscoelastic models. In:  Shaw MT editors. Introduction to polymer viscoelasticity. 3rd ed.. New York: Wiley–Interscience; 2005;
  13. Lin-Gibson S, Landis FA, Drzal PL. Combinatorial investigation of the structure-properties characterization of photopolymerized dimethacrylate networks. Biomaterials. 2006;27:1711–1717
  14. Lu H, Wang B, Ma J, Huang G, Viswanathan H. Measurement of creep compliance of solid polymers by nanoindentation. Mech Time-Dependent Mater. 2003;7:189–207
  15. Lee EHRJ. The contact problem for viscoelastic bodies. J Appl Mech. 1960;27:438
  16. Hay JL, Pharr GM. Instrumented indentation testing. In:  Kuhn H,  Medlin D editor. ASM handbook: mechanical testing and evaluation. vol. 8:OH: ASM International; 2000;
  17. Senawongse P, Harnirattisai C, Otsuki M, Tagami J. Effect of led light-curing time for the adhesive resin on the modulus of elasticity. Am J Dent. 2007;20:139–141
  18. Yamauti M, Nikaido T, Ikeda M, Otsuki M, Tagami J. Microhardness and young's modulus of a bonding resin cured with different curing units. Dent Mater J. 2004;23:457–466
  19. Sadr A, Ghasemi A, Shimada Y, Tagami J. Effects of storage time and temperature on the properties of two self-etching systems. J Dent. 2007;35:218–225
  20. Tsui TY, Pharr GM. Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates. J Mater Res. 1999;14:292–301
  21. Bhattacharya AK, Nix WD. Finite-element simulation of indentation experiments. Int J Solids Struct. 1988;24:881–891
  22. Drummond JL. Nanoindentation of dental composites. J Biomed Mater Res B: Appl Biomater. 2006;78:27–34
  23. Tai HJ. Structure and properties of poly(vinyl chloride)-triallyl cyanurate plastisols. Polym Eng Sci. 2001;41:998–1006
  24. Dickens SH, Cho BH. Interpretation of bond failure through conversion and residual solvent measurements and weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater. 2005;21:354–364
  25. Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems. I. Depth of penetration beyond dentin smear layers. Dent Mater. 2001;17:296–308
  26. Yang JL, Zhang Z, Schlarb AK, Friedrich K. On the characterization of tensile creep resistance of polyamide 66 nanocomposites. Part II. Modeling and prediction of long-term performance. Polymer. 2006;47:6745–6758
  27. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials. 2005;26:6449–6459
  28. Nikaido T, Kunzelmann KH, Chen H, Ogata M, Harada N, Yamaguchi S, et al. Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin. Dent Mater. 2002;18:269–275
  29. Toledano M, Osorio R, Albaladejo A, Aguilera FS, Tay FR, Ferrari M. Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives. Oper Dent. 2006;31:25–32
  30. Frankenberger R, Pashley DH, Reich SM, Lohbauer U, Petschelt A, Tay FR. Characterisation of resin–dentine interfaces by compressive cyclic loading. Biomaterials. 2005;26:2043–2052

PII: S0109-5641(08)00129-2

doi: 10.1016/j.dental.2008.05.001

Dental Materials
Volume 25, Issue 1 , Pages 13-19 , January 2009

Article Tools

* Image Usage & Resolution