Dental Materials
Volume 25, Issue 1 , Pages 4-12 , January 2009

Influence of joint component mechanical properties and adhesive layer thickness on stress distribution in micro-tensile bond strength specimens

  • Aline de A. Neves

      Affiliations

    • Katholieke Universiteit Leuven, Department of Conservative Dentistry, Leuven BIOMAT Research Cluster, Belgium
    • ,
  • Eduardo Coutinho

      Affiliations

    • Katholieke Universiteit Leuven, Department of Conservative Dentistry, Leuven BIOMAT Research Cluster, Belgium
    • ,
  • André Poitevin

      Affiliations

    • Katholieke Universiteit Leuven, Department of Conservative Dentistry, Leuven BIOMAT Research Cluster, Belgium
    • ,
  • Jos Van der Sloten

      Affiliations

    • Katholieke Universiteit Leuven, Department of Mechanical Engineering, Division of Biomechanics and Engineering Design, Belgium
    • ,
  • Bart Van Meerbeek

      Affiliations

    • Katholieke Universiteit Leuven, Department of Conservative Dentistry, Leuven BIOMAT Research Cluster, Belgium
    • Corresponding Author InformationCorresponding author at: Katholieke Universiteit Leuven, Department of Conservative Dentistry, Leuven BIOMAT Research Cluster, Kapucijnenvoer 7, 3000 Leuven, Belgium. Tel.: +32 16 337587; fax: +32 16 332752.
    • ,
  • Hans Van Oosterwyck

      Affiliations

    • Katholieke Universiteit Leuven, Department of Mechanical Engineering, Division of Biomechanics and Engineering Design, Belgium

Received 15 October 2007 ,Revised 20 March 2008 ,Accepted 15 April 2008.

References 

  1. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Buonocore memorial lecture—adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28:215–235
  2. Lacombe R. Adhesion measurements methods: theory and practice. New York: Taylor & Francis; 2006;pp. 7–74
  3. Pashley DH, Carvalho RM, Sano H, Nakajima M, Yoshiyama M, Shono Y, et al. The microtensile bond test: a review. J Adhes Dent. 1999;1:299–309
  4. Patrick RL. Treatise on adhesion and adhesives. New York: Marcel Dekker; 1989;pp. 21–55
  5. Kinloch AJ. Adhesion and adhesives: science and technology. London: Chapman & Hall; 1994;pp. 188–263
  6. Bogy DB. On the problem of edge-bonded elastic quarter planes loaded at the boundary. Int J Solids Struct. 1970;6:1287–1313
  7. Adams RD, Coppendale J. Stress-strain behavior of axially-loaded butt joints. J Adhes. 1979;10:49–62
  8. Munz D, Yang YY. Stresses near the edge of bonded dissimilar materials described by 2 stress intensity factors. Int J Fract. 1993;60:169–177
  9. Munz D, Yang YY. Stress singularities at the interface in bonded dissimilar materials under mechanical and thermal loading. J Appl Mech. 1992;59:857–861
  10. Akisanya AR. On the singular stress field near the edge of bonded joints. J Strain Anal. 1977;32:301–311
  11. Reedy ED. Connection between interface corner and interfacial fracture analyses of an adhesively-bonded butt joint. Int J Solids Struct. 2000;37:2429–2442
  12. Anderson GP, Devries KL. Predicting strength of adhesive joints from test-results. Int J Fract. 1989;39:191–200
  13. Lee BS, Chiang YC, Hung WC, Cheng JH, Lin CP. Failure criteria of dentin–resin adhesion—the J-integral approach. Scripta Mater. 2007;56:863–866
  14. Van Noort R, Noroozi S, Howard IC, Cardew G. A critique of bond strength measurements. J Dent. 1989;17:61–67
  15. Sano H, Shono T, Sonoda H, Takatsu T, Ciucchi B, Carvalho R, et al. Relationship between surface area for adhesion and tensile bond strength—evaluation of a micro-tensile bond test. Dent Mater. 1994;10:236–240
  16. Phrukkanon S, Burrow MF, Tyas MJ. The influence of cross-sectional shape and surface area on the microtensile bond test. Dent Mater. 1998;14:212–221
  17. El Zohairy AA, de Gee AJ, de Jager N, van Ruijven LJ, Feilzer AJ. The influence of specimen attachment and dimension on microtensile strength. J Dent Res. 2004;83:420–424
  18. Wu GF, Crocombe AD. Simplified finite element modelling of structural adhesive joints. Comput Struct. 1996;61:385–391
  19. Abe Y, Lambrechts P, Inoue S, Braem MJA, Takeuchi M, Vanherle G, et al. Dynamic elastic modulus of ‘packable’ composites. Dent Mater. 2001;17:520–525
  20. Kinney JH, Balooch M, Marshall GM, Marshall SJ. A micromechanics model of the elastic properties of human dentine. Arch Oral Biol. 1999;44:813–822
  21. Lin CT, Lee SY, Kuo YW, Lu HK, Cheng HC. Laser-induced acoustic emission in aged dentin bonding systems. J Dent Res. 1988;77:943
  22. Packham DE. Handbook of adhesion. New York: John Wiley & Sons; 2005;pp. 189–92
  23. Sawa T, Iwata A, Ishikawa H. Two-dimensional stress-analysis of adhesive butt joints subjected to tensile loads. Bull Jap Soc Mech Eng. 1986;29:4037–4042
  24. Reedy ED, Guess TR. Interface corner failure analysis of joint strength: effect of adherend stiffness. Int J Fract. 1998;88:305–314
  25. Reedy ED, Guess TR. Comparison of butt tensile-strength data with interface corner stress intensity factor prediction. Int J Solids Struct. 1993;30:2929–2936
  26. Anderson GP, Bennet SJ, Devries KL. Analysis and testing of adhesive bonds. New York: Academic Press; 1977;pp. 185–248
  27. Silva N, Calamia CS, Harsono M, Carvalho RM, Pegoraro LF, Fernandes CAO, et al. Bond angle effects on microtensile bonds: laboratory and FEA comparison. Dent Mater. 2006;22:314–324
  28. Silva ALF, Lima DANL, Souza GMD, Santos CTD, Paulillo LAMS. Influence of additional adhesive application on the microtensile bond strength of adhesive systems. Oper Dent. 2006;31:562–568
  29. Zheng L, Pereira PNR, Nakajima M, Sano H, Tagami J. Relationship between adhesive thickness and microtensile bond strength. Oper Dent. 2001;26:97–104
  30. Alwar RS, Nagaraja YR. Elastic analysis of adhesive butt joints. J Adhes. 1976;7:279–287
  31. Meira JBC, Ballester RY, Lima RG, Souza RM, Driemeier L. Geometrical aspects on bimaterial micro-tensile tests. J Braz Soc Mech Sci Eng. 2005;27:310–313
  32. Sawa T, Suzuki Y, Kido S. Stress analysis and strength estimation of butt adhesive joints of dissimilar hollow cylinders under impact tensile loadings. J Adhes Sci Technol. 2003;17:943–965
  33. Sawa T, Temma K, Tsunoda Y. Axisymmetric stress-analysis of adhesive butt joints of dissimilar solid cylinders subjected to external tensile loads. Int J Adhes Adhes. 1989;9:161–169

PII: S0109-5641(08)00119-X

doi: 10.1016/j.dental.2008.04.009

Dental Materials
Volume 25, Issue 1 , Pages 4-12 , January 2009

Article Tools

* Image Usage & Resolution