Dental Materials
Volume 24, Issue 12 , Pages 1647-1654 , December 2008

Polymer induced crystal organization of composite resins

  • Alain Pefferkorn

      Affiliations

    • Institut Charles Sadron, 23 rue du Loess, BP 84047, 67034 Strasbourg Cedex 2, France
    • ,
  • Mounir Maaloum

      Affiliations

    • Institut Charles Sadron, 23 rue du Loess, BP 84047, 67034 Strasbourg Cedex 2, France
    • ,
  • Emile Pefferkorn

      Affiliations

    • Institut Charles Sadron, 23 rue du Loess, BP 84047, 67034 Strasbourg Cedex 2, France
    • Corresponding Author InformationCorresponding author. Tel.: +33 3 88 41 40 26; fax: +33 3 88 41 40 99.
    • ,
  • Youssef Haïkel

      Affiliations

    • Faculté de Chirurgie Dentaire, INSERM – UMR 595, 4 rue Kirchleger, Université Louis Pasteur, 67085 Strasbourg Cedex, France

Received 4 January 2008 ,Accepted 25 March 2008.

References 

  1. Pefferkorn A, Haïkel Y, Pefferkorn E. Polymerization contraction of light-cured composite resins containing silica/polymethylmethacrylate bonded microstructured networks. J Colloid Interface Sci. 2005;291:388–395
  2. Pefferkorn A, Pefferkorn E, Haïkel Y. Influence of the colloidal crystal-like arrangement of polymethylmethacrylate bonded aerosil particles on the polymerization shrinkage of composite resins. Dent Mater. 2006;22:661–670
  3. Luo J, Seghi R, Lannuti J. Effect of silane coupling agents on the wear resistance of polymer-nanoporous silica gel dental composites. Mater Sci Eng. 1997;C5:15–23
  4. Luo J, Lannuti J, Seghi R. Effect of filler porosity on the abrasion resistance of nanoporous silica gel/polymer composites. Dent Mater. 1998;14:29–36
  5. Ikejima L, Nomoto R, McCabe JF. Shear punch strength and flexural strength of model composites with varying filler volume fraction, particle size and silanation. Dent Mater. 2002;18:206–211
  6. Carlos NB, Harrison A. The effect of untreated UHMWPE beads on some properties of acrylic resin denture base materials. J Dent. 1997;25:59–64
  7. Xu HHK, Quinn JB, Smith DT, Antonucci JM, Schumacher GE, Eichmiller FC. Dental resin composites containing silica-fused whiskers—effect of wiskers-to-silica ratio on fracture toughness and indentation properties. Biomaterials. 2002;23:735–742
  8. Lusti HR, Karmilov IA, Gusev AA. Effect of particle agglomeration on the elastic properties of filled polymers. Soft Mater. 2003;1:115–120
  9. Tatek Y, Stoll S, Pefferkorn E. Internal cohesion of agglomerates II. An elementary approach for assemblies of weakly agglomerated 3d-clusters. Powder Technol. 2001;115:226–233
  10. Starchev K, Stoylov S. Structure of silica determined by use of a light-scattering method. Phys Rev B. 1993;47:11725–11729
  11. Kim S, Kim E, Kim S, Kim W. Surface modification of silica nanoparticles by UV-induced graft polymerization of methyl methacrylate. J Colloid Interface Sci. 2005;292:93–98
  12. Liu Q, Ding J, Chambers DE, Debnath S, Wunder SL, Baran GR. Filler-coupling agent-matrix interactions in silica/polymethylmethacrylate composites. J Biomed Mater Res. 2001;57:384–393
  13. Blum FD, Lin W-Y, Porter CE. Dynamics of adsorbed poly(methyl acrylate) and poly(methyl methacrylate) on silica. Colloid Polym Sci. 2003;281:197–202
  14. Tatek Y, Pefferkorn E. Cluster-cluster aggregation controlled by the number of intercluster connections: kinetics of aggregation and cluster mass frequency. J Colloid Interface Sci. 2004;278:361–371
  15. Pefferkorn E. The cohesion of fractal agglomerates: an elementary numerical model. In:  Salman AD,  Ghadiri M,  Hounslow MJ editor. Handbook of powder technology, vol. 12 “ particle breakage”. Amsterdam: Elsevier; 2007;p. 741–791
  16. Jullien R, Botet R. Aggregation and fractal aggregates. Singapore: World Scientific Publishing; 1987;
  17. Horwatt SW, Feke DL, Manas-Zloczower I. The influence of structural heterogeneities on the cohesivity and breakup of agglomerates in simple shear flow. Powder Technol. 1992;72:113–119
  18. Tatek Y, Stoll S, Ouali L, Pefferkorn E. Structure and cohesion of weakly agglomerated fractal systems. Powder Technol. 2004;143/144:117–129
  19. Linsenbühler M. Herstellung und Characterisierung functionalisierter Composite-Partikel. Doktor-Ingenieur Diplomarbeit, Technical Faculty of the Erlangen-Nuremberg University (2005).
  20. Barthel H, Gottschalk-Gaudig T, Dreyer M. Pyrogenic silica—rheological properties in reactive resin systems. In:  Nardin M,  Papirer E editor. Powder and fibers. Interfacial science and applications. Surfactant science series. vol. 137:New York: CRC Press; 2007;p. 565–609
  21. Starovoitova NY. Computer simulation of linear and comblike copolymers at an interface. Dr rer nat Diplomarbeit, Faculty of Natural Sciences, University of Ulm (2004).
  22. La Mer VK. Filtration of colloidal dispersions flocculated by anionic and cationic polyelectrolytes. Disc Faraday Soc. 1966;42:248–254
  23. Lin W-Y, Blum FD. Segmental dynamics of bulk and adsorbed poly(methyl acrylate)-d3 by deuterium NMR: effect of adsorbed amount. Macromolecules. 1997;30:5331–5338
  24. Degussa. Aerosil. Product overview. Technical bulletin. 2004.
  25. Schneider HM, Frantz P, Granick S. The bimodal energy landscape when polymer adsorbs. Langmuir. 1996;12:994–996
  26. Lin Q, Ding J, Chambers DE, Debnath S, Wunder SL, Baran GR. Filler-coupling agent-matrix interactions in silica/polethylmethacrylate composites. J Biomed Mater Res. 2001;57:384–393
  27. Kim S, Kim E, Kim S, Kim W. Surface modification of silica nanoparticles by UV-induced graft polymerization of methylmethacrylate. J Colloid Interface Sci. 2005;292:93–98

PII: S0109-5641(08)00095-X

doi: 10.1016/j.dental.2008.03.023

Dental Materials
Volume 24, Issue 12 , Pages 1647-1654 , December 2008

Article Tools

* Image Usage & Resolution