Dental Materials
Volume 24, Issue 10 , Pages 1336-1342 , October 2008

Application of analytical stress solutions to bi-axially loaded dental ceramic–dental cement bilayers

  • Owen Addison

      Affiliations

    • Biomaterials Unit, School of Dentistry, University of Birmingham, St. Chad's Queensway, Birmingham B4 6NN, UK
    • Corresponding Author InformationCorresponding author. Tel.: + 44 121 237 2883; fax: + 44 121 237 2932.
    • ,
  • Garry J.P. Fleming

      Affiliations

    • Materials Science Unit, Division of Oral Biosciences, Dublin Dental School & Hospital, Trinity College Dublin, Ireland

Received 28 August 2007 ,Revised 26 February 2008 ,Accepted 26 February 2008.

References 

  1. Addison O, Marquis PM, Fleming GJ. Resin elasticity and the strengthening of all-ceramic restorations. J Dent Res. 2007;86:519–523
  2. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81:652–661
  3. Young W, Budynas . Bimetallic plates. In:  Young W,  Budynas R editor. Roark's formulas for stress and strain. 7th ed.. Singapore: McGraw and Hill; 2002;p. 435–439
  4. Zeng K, Odén A, Rowcliffe D. Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont Res. 1998;11:183–189
  5. Thompson GA. Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite. Dent Mater. 2000;16:235–243
  6. Hsueh CH, Lance MJ, Ferber MK. Stress distributions in thin bilayer discs subjected to ball-on-ring tests. J Amer Ceram Soc. 2005;6:1687–1690
  7. Hsueh CH, Luttrell CR, Becher PF. Analyses of multilayered dental ceramics subjected to biaxial flexure tests. Dent Mater. 2006;22:460–469
  8. Hsueh CH, Thompson GA, Jadaan OM, Wereszczak AA, Becher PF. Analyses of layer-thickness effects in bilayered dental ceramics subjected to thermal stresses and ring-on-ring tests. Dent Mater. 2008;24:9–17
  9. Hsueh CH, Thompson GA. Appraisal of formulas for stresses in bilayered dental ceramics subjected to biaxial moment loading. J Dent. 2007;35:600–606
  10. Rosenstiel SF, Gupta PK, Van der Sluys RA, Zimmerman MH. Strength of a dental glass-ceramic after surface coating. Dent Mater. 1993;9:274–279
  11. Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N. The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems. J Prosthet Dent. 2005;93:459–466
  12. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. J Dent Res. 1990;69:1791–1799
  13. Bernebaum R, Brodie I. Measurement of the tensile strength of brittle materials. Br J Appl Phys. 1959;10:281–287
  14. Timoshenko S, Woinowsky-Krieger S. Symmetrical Bending of Circular Plates. In:  Timoshenko SP editors. Theory of Plates and Shells. 2nd ed.. New York: McGraw-Hill; 1959;p. 51–78
  15. Fleming GJP, Narayan O. The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs. Dent Mater. 2003;19:69–76
  16. Fleming GJ, Jandu HS, Nolan L, Shaini FJ. The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material. J Dent. 2004;32:67–74
  17. Addison O, Fleming GJP. The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material. Dent Mater. 2004;20:286–292
  18. Fleming GJP, Maguire RF, Bhamra G, Burke FM, Marquis PM. The strengthening mechanism of resin cements on porcelain surfaces. J Dent Res. 2006;85:272–276
  19. Addison O, Marquis PM, Fleming GJP. Resin strengthening of dental ceramic—the impact of surface texture and silane. J Dent. 2007;35:416–424
  20. Anusavice KJ, Hojjatie B. Tensile stresses in glass-ceramic crowns: effect of flaws and cement voids. Int J Prosthodont. 1992;5:351–358
  21. Quinn JB, Quinn GD, Kelly JR, Scherrer SS. Fractographic analyses of three 1ceramic whole crown restoration failures. Dent Mater. 2005;21:920–929
  22. Scherrer SS, Quinn JB, Quinn GD, Kelly JR. Failure analysis of ceramic clinical cases using qualitative fractography. Int J Prosthodont. 2006;19:185–192
  23. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the current literature. J Prosthet Dent. 1999;80:281–301
  24. Li ZC, White SN. Mechanical properties of dental luting cements. J Prosthet Dent. 1999;81:597–609
  25. Riskalla AS, Jones DW. Mechanical properties of commercial high strength ceramic core materials. Dent Mater. 2004;20:207–212
  26. Weibull W. A statistical distribution function of wide applicability. J Appl Mech. 1951;18:293–297
  27. Fleming GJP, Shelton RM, Marquis PM. The influence of clinically induced variability on the bi-axial fracture strength of aluminous core porcelain discs. J Dent. 1999;27:587–594
  28. Bhamra G, Palin WM, Fleming GJP. The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material. J Dent. 2002;30:153–160
  29. Griggs JA, Zhang YL. Determining the confidence intervals of Weibull parameters estimated using a more precise probability estimator. J Mater Sci Lett. 2003;22:1771–1773
  30. Nathanson D. Principles of porcelain use as an inlay/onlay material. In:  Gaber GA,  Goldstein RE editor. Porcelain and composite inlays and onlays. Illinois: Quintessence; 1993;p. 23–32
  31. Marquis PM. The influence of cements on the mechanical performance of dental ceramics. Bioceram. 1992;5:317–324

PII: S0109-5641(08)00058-4

doi: 10.1016/j.dental.2008.02.013

Dental Materials
Volume 24, Issue 10 , Pages 1336-1342 , October 2008

Article Tools

* Image Usage & Resolution