Dental Materials
Volume 24, Issue 9 , Pages 1194-1200 , September 2008

Degree of conversion of resin blends in relation to ethanol content and hydrophilicity

  • Milena Cadenaro

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Via Stuparich 1, I-34125 Trieste, Italy
    • Corresponding Author InformationCorresponding author. Tel.: +39 040 662744; fax: +39 040 662744.
    • ,
  • Lorenzo Breschi

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Via Stuparich 1, I-34125 Trieste, Italy
    • IGM-CNR, Unit of Bologna c/o IOR, Bologna, Italy
    • ,
  • Francesca Antoniolli

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Via Stuparich 1, I-34125 Trieste, Italy
    • ,
  • Chiara O. Navarra

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Via Stuparich 1, I-34125 Trieste, Italy
    • ,
  • Annalisa Mazzoni

      Affiliations

    • Department of SAU & FAL, University of Bologna, Bologna, Italy
    • ,
  • Franklin R. Tay

      Affiliations

    • Department of Oral Biology & Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, GA 30912-1129, USA
    • ,
  • Roberto Di Lenarda

      Affiliations

    • Department of Biomedicine, Unit of Dental Sciences and Biomaterials, University of Trieste, Via Stuparich 1, I-34125 Trieste, Italy
    • ,
  • David H. Pashley

      Affiliations

    • Department of Oral Biology & Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, GA 30912-1129, USA

Received 13 April 2007 ,Revised 23 January 2008 ,Accepted 29 January 2008.

References 

  1. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28:215–235
  2. Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, De Stefano Dorigo E. Dental Adhesion review: aging and stability of the bonded interface. Dental Mater. 2008;24:90–101
  3. Tay FR, Pashley DH. Have dentin adhesives become too hydrophilic?. J Can Dent Assoc. 2003;69:724–731
  4. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single-step adhesives are permeable membranes. J Dent. 2002;30:371–382
  5. Sano H, Yoshikawa T, Pereira PN, Kanemura N, Morigami M, Tagami J, et al. Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res. 1999;78:906–911
  6. Takahashi A, Inoue S, Kawamoto C, Ominato R, Tanaka T, Sato Y, et al. In vivo long-term durability of the bond to dentin using two adhesive systems. J Adhes Dent. 2002;4:151–159
  7. De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K, et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res. 2003;82:136–140
  8. Cadenaro M, Antoniolli F, Sauro S, Tay FR, Di Lenarda R, Prati C, et al. Degree of conversion and permeability of dental adhesives. Eur J Oral Sci. 2005;113:525–530
  9. Breschi L, Cadenaro M, Antoniolli F, Sauro S, Biasotto M, Prati C, et al. Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability. Dent Mater. 2007;23:1066–1072
  10. Tay FR, Suh BI, Pashley DH, Prati C, Chuang SF, Li F. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. II. Single-bottle, total-etch adhesive. J Adhes Dent. 2003;5:91–105
  11. Ferracane JL, Greener EH. The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res. 1986;20:121–131
  12. Ferracane JL. Elution of leachable components from composites. J Oral Rehabil. 1994;21:441–452
  13. Munksgaard EC, Peutzfeldt A, Asmussen E. Elution of TEGDMA and BisGMA from a resin and a resin composite cured with halogen or plasma light. Eur J Oral Sci. 2000;108:341–345
  14. Miller RC, Bowles CQ, Chappelow CC, Eick JD. Application of solubility parameter theory to dentin bonding systems and adhesive strength correlation. J Biomed Mater Res. 1998;41:237–243
  15. Chappelow CC, Power MD, Bowles CQ, Miller RC, Pinzino CS, Eick JD. Novel priming and cross-linking systems for use with isocyanomethylacrylate dental resins. Dent Mater. 2000;16:396–405
  16. Pashley DH, Agee KA, Nakajima M, Tay FR, Carvalho RM, Terada RSS, et al. Solvent-induced dimensional changes in EDTA-demineralized dentin matrix. J Biomed Mater Res. 2001;56:273–281
  17. Eddleston CL, Hindle AR, Agee KA, Carvalho RM, Tay FR, Rueggeberg FA, et al. Dimensional changes in acid-demineralized dentin matrices following the use of HEMA–water versus HEMA–alcohol primers. J Biomed Mater Res. 2003;67A:900–907
  18. Perdigao J, Frankenberger R, Rosa BT, Breschi L. New trends in dentin/enamel adhesion. Am J Dent. 2000;13:25D–30D[special]
  19. Elliott JE, Anseth JW, Bowman CN. Kinetic modeling of the effect of solvent concentration on primary cyclization during polymerization of multifunctional monomers. Chem Eng Sci. 2001;56:3173–3184
  20. Ye Q, Spencer P, Wang Y, Misra A. Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives. J Biomed Mater Res A. 2007;80:342–350
  21. Tay FR, Gwinnett AJ, Pang KM, Wei SH. Variability in microleakage observed in a total-etch wet-bonding technique under different handling conditions. J Dent Res. 1995;74:1168–1178
  22. Cho B, Dickens SH. Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater. 2004;20:107–115
  23. Van Landuyt KL, De Munck J, Snauwaert J, Coutinho E, Poitevin A, Yoshida Y, et al. Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res. 2005;84:183–188
  24. Odian G. Principles of polymerization. New York: Wiley; 1981;
  25. Holmes RG, Rueggeberg FA, Callen RS, Caughman F, Chan DCN, Pashley DH. Effect of solvent type and content on monomer conversion of a model resin system as a thin film. Dent Mater. 2007;23:1506–1512
  26. Dickens SH, Cho BH. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater. 2005;21:354–364
  27. Sideridou I, Tserki V, Papanastasiou G. Effect of chemical structure on the degree of conversion in light-cured dimethacrylate-based dental resins. Biomaterials. 2002;23:1819–1829
  28. Yiu CK, Pashley EL, Hiraishi N, King NM, Goracci C, Ferrari M, et al. Solvent and water retention in dental adhesive films after evaporation. Biomaterials. 2005;26:6863–6872
  29. Yiu CK, King NM, Pashley DH, Suh BI, Carvalho RM, Carrilho MR, et al. Effect of resin hydrophilicity and water storage on resin strength. Biomaterials. 2004;25:5789–5796
  30. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials. 2005;26:6449–6459
  31. Malacarne J, Carvahlo RM, de Goes MF, Svizero N, Pashley DH, Tay FR, et al. Water sorption/solubility of dental adhesive resins. Dent Mater. 2006;22:973–980
  32. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based resins. Biomaterials. 2003;24:655–665
  33. Wang Y, Spencer P. Continuing etching of an all-in-one adhesive in wet dentin tubules. J Dent Res. 2005;84:350–354
  34. Hotta M, Kondoh K, Kamemizu H. Effect of primers on bonding agent polymerization. J Oral Rehabil. 1998;25:792–799
  35. Yiu CKY, Pashley E, Hiraishi N, King NM, Goracci C, Ferrari M, et al. Solvent and water retention in dental adhesive blends after evaporation. Biomaterials. 2005;26:6863–6872
  36. Jacobsen T, Soderhölm KJ. Some effects of water on dentin bonding. Dent Mater. 1995;11:132–136
  37. Paul SJ, Leach M, Rueggeberg FA, Pashley DH. Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent. 1999;27:209–214
  38. Ferracane JL, Berge HX, Condon JR. In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler/matrix coupling. J Biomed Mater Res. 1998;42:465–472

PII: S0109-5641(08)00023-7

doi: 10.1016/j.dental.2008.01.012

Dental Materials
Volume 24, Issue 9 , Pages 1194-1200 , September 2008

Article Tools

* Image Usage & Resolution