Dental Materials
Volume 24, Issue 8 , Pages 1050-1057 , August 2008

Influence of thermal cycling on flexural properties of composites reinforced with unidirectional silica-glass fibers

  • Gökçe Meriç

      Affiliations

    • Department of Prosthetic Dentistry, Institute of Clinical Dentistry, University of Oslo, Oslo, Norway
    • NIOM, Nordic Institute of Dental Materials, Haslum, Norway
    • ,
  • I. Eystein Ruyter

      Affiliations

    • NIOM, Nordic Institute of Dental Materials, Haslum, Norway
    • Corresponding Author InformationCorresponding author at: NIOM, Nordic Institute of Dental Materials, P.O. Box 70, NO-1305 Haslum, Norway. Tel.: +47 67 51 22 09; fax: +47 67 59 15 30.

Received 24 April 2007 ,Accepted 13 December 2007.

References 

  1. Nielsen LE. Mechanical properties of polymer and composites. New York: Marcel Dekker Inc.; 1974;p. 453–510
  2. Freilich MA, Meiers JC, Duncan JP, Goldberg AJ. Fiber reinforced composites in clinical dentistry. 1st ed.. Chicago: Quintessence Publishing Co. Inc.; 2000;p. 1–8
  3. Vallittu PK. Experiences of the use of glass fibres with multiphase acrylic resin systems. In:  Vallittu PK editors. The first symposium on fibre reinforced plastics in dentistry in the proceedings of the 22nd annual EPA conference. Biomaterials Project Institute of Dentistry, Finland. 1998;Paper II
  4. Carley JF. Whittington's dictionary of plastics. 3rd ed.. Lancaster: Technomic Publishing Co. Inc.; 1993;p. 439
  5. Xu HH, Schumacher GE, Eichmiller FC, Peterson RC, Antonucci JM, Mueller HJ. Continuous-fiber preform reinforcement of dental resin composite restorations. Dent Mater. 2003;19:523–530
  6. Krenchel H. Fiber reinforcement. Copenhagen: Akademisk Forlag; 1964;p. 11–38
  7. Murphy J. Reinforced plastics handbook. 2nd ed.. Oxford: Elsevier Science Ltd.; 1998;p. 254–98
  8. Vallittu PK. Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers. J Prosthet Dent. 1999;81:318–326
  9. Segerström S, Ruyter IE. Mechanical and physical properties of carbon-graphite fiber-reinforced polymers intended for implant suprastructures. Dent Mater. 2007;23:1150–1156
  10. Meriç G, Ruyter IE. Effect of thermal cycling on composites reinforced with two differently sized silica-glass fibers. Dent Mater. 2007;23:1157–1163
  11. Pantano CG, Carman LA, Warner S. Glass fiber surface effects in silane coupling. In:  Mittal KL editors. Silanes and other coupling agents. Utrecht: VSP; 1992;p. 229–240
  12. Ruyter IE, Svendsen SA. Flexural properties of denture base polymers. J Prosthet Dent. 1980;43:95–104
  13. Andrews RJ, Grulke EA. Glass transition temperatures of polymers. In:  Brandrup j,  Immergut EH,  Grulke EA editor. Polymer handbook. New Jersey: John Wiley & Sons; 1999;p. VI/204
  14. Nielsen LE. Mechanical properties of polymers and composites. New York: Marcel Dekker Inc.; 1974;p. 341–77
  15. Segerström S, Meriç G, Knarvang T, Ruyter IE. Evaluation of two matrix materials intended for fiber-reinforced polymers. Eur J Oral Sci. 2005;113:422–428
  16. Meriç G, Dahl JE, Ruyter IE. Physicochemical evaluation of silica-glass fiber reinforced polymers for prosthodontic applications. Eur J Oral Sci. 2005;113:258–264
  17. Kawano F, Ohguri T, Ichikawa T, Matsumoto N. Influence of thermal cycles in water on flexural strength of laboratory-processed composite resin. J Oral Rehabil. 2001;28:703–707
  18. Göhring TN, Gallo L, Lüthy H. Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite. Dent Mater. 2005;21:761–772
  19. Rantala LI, Lastumäki TM, Peltomäki T, Vallittu PK. Fatigue resistance of removable orthodontic appliance reinforced with glass fiber weave. J Oral Rehabil. 2003;30:501–506
  20. Lassila LVJ, Tanner J, Le Bell A-M, Narva K, Vallittu PK. Flexural properties of fiber reinforced root canal posts. Dent Mater. 2004;20:29–36
  21. Drummond JL, Bapna MS. Static and cyclic loading of fiber-reinforced dental resin. Dent Mater. 2003;19:226–231
  22. Øysæd H, Ruyter IE. Composites for use in posterior teeth: mechanical properties tested under dry and wet conditions. J Biomed Mater Res. 1986;20:261–271
  23. Calais JG, Söderholm KJ. Influence of filler type and water exposure on flexural strength of experimental composite resins. J Dent Res. 1988;67:836–840
  24. Lassila LV, Tezvergil A, Lahdenpera M, Alander P, Shinya A, Vallittu PK. Evaluation of some properties of two fiber-reinforced composite materials. Acta Odontol Scand. 2005;63:196–204
  25. Lassila LV, Nohrström T, Vallittu PK. The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composites. Biomaterials. 2002;10:2221–2229
  26. Chai J, Takahashi Y, Hisama K, Shimizu H. Effect of water storage on the flexural properties of three glass fiber-reinforced composites. Int J Prosthodont. 2005;18:28–33
  27. Quartzel fiber products-brochure and technical data. Paris: Saint-Gobain Quartz; 2004;p. 1–24
  28. ISO 6344-1. Coated abrasives—grain size analysis. Geneva: International Organization for Standardization; 1998. p. 1–6.
  29. ISO 1567. Dentistry—denture base polymers. Geneva: International Organization for Standardization; 1999. p. 1–27.
  30. Deboer J, Vermilyea SG, Brady RE. The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins. J Prosthet Dent. 1984;51:119–121
  31. Murphy J. Reinforced plastics handbook. 2nd ed.. Oxford: Elsevier Science Ltd.; 1998;p. 237–52
  32. Agarwal BD, Broutman LJ, Chandrashekhara K. Analysis and performance of fiber composites. 3rd ed.. New Jersey: John Wiley and Sons Inc.; 1980;p. 263–4
  33. Agarwal BD, Broutman LJ, Chandrashekhara K. Analysis and performance of fiber composites. 3rd ed.. New Jersey: John Wiley and Sons Inc.; 1980;p. 378–85

PII: S0109-5641(07)00296-5

doi: 10.1016/j.dental.2007.12.003

Dental Materials
Volume 24, Issue 8 , Pages 1050-1057 , August 2008

Article Tools

* Image Usage & Resolution