Dental Materials
Volume 24, Issue 5 , Pages 606-610 , May 2008

Effect of nanofiller fractions and temperature on polymerization shrinkage on glass fiber reinforced filling material

  • Sufyan Garoushi

      Affiliations

    • Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, FI-20520 Turku, Finland
    • Corresponding Author InformationCorresponding author. Tel.: +358 2 333 83 58; fax: +358 2 333 83 90.
    • ,
  • Pekka K. Vallittu

      Affiliations

    • Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, FI-20520 Turku, Finland
    • ,
  • David C. Watts

      Affiliations

    • Biomaterials Research Group, School of Dentistry, University of Manchester, Manchester, UK
    • ,
  • Lippo V.J. Lassila

      Affiliations

    • Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, FI-20520 Turku, Finland

Received 15 December 2006 ,Accepted 6 June 2007.

References 

  1. Bowen RL. Properties of a silica-reinforced polymer for dental restorations. J Am Dent Assoc. 1963;66:57–64
  2. Wilder AD, May KN, Bayne SC, Taylor DF, Leinfelder KF. Seventeen-year clinical study of ultraviolet-cured posterior composite Class I and II restorations. J Esthet Dent. 1999;11:135–142
  3. Ferracane JL, Berge HX, Condon JR. In vitro aging of dental composites in water—effect of degree of conversion, filler volume, and filler/matrix coupling. J Biomed Mater Res. 1998;42:465–472
  4. Asmussen E. Restorative resins: hardness and strength vs. quantity of remaining double bonds. Scand J Dent Res. 1982;90:484–489
  5. Eick JD, Kaufman GM, Chappelow CC. Applications of polymers: what are the future trend?. Acad Dent Mater Trans. 1979;10:89–98
  6. Watts DC, Hindi AA. Intrinsic soft-start polymerization shrinkage-kinetics in an acrylate-based resin composite. Dent Mater. 1999;15:39–45
  7. Krause WR, Park SH, Straup RA. Mechanical properties of Bis-GMA resin short glass fibre composites. J Biomed Mater Res. 1998;23:1195–1211
  8. Petersen RC. Discontinuous fibre-reinforced composites above critical length. J Dent Res. 2005;84:365–370
  9. Bayne SC, Thompson JY. Mechanical property analysis of two admixed PRIMM-modified commercial dental composites. Trans Acad Dent Mater. 1996;9:238
  10. Garoushi S, Lassila LVJ, Tezvergil A, Vallittu PK. Load bearing capacity of fibre-reinforced and particulate filler composite resin combination. J Dent. 2006;34:179–184
  11. Xu HHK, Quinn JB, Smith DT, Giuseppetti AA, Eichmiller FC. Effect of different whiskers on the reinforcement of dental resin composites. Dent Mater. 2003;19:359–367
  12. Zandinejad AA, Atai M, Pahlevan A. The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites. Dent Mater. 2006;22:382–387
  13. Chen MH, Chen CR, Hsu SH, Sun SP, Su WF. Low shrinkage light curable nanocomposite for dental restorative material. Dent Mater. 2006;22:138–145
  14. Atai M, Watts DC. A new kinetic model for the polymerization shrinkage-strain of dental composites and resin-monomers. Dent Mater. 2006;22:785–791
  15. Calheiros FC, Braga RR, Kawano Y, Ballester RY. Relationship between contraction stress and degree of conversion in restorative composites. Dent Mater. 2004;20:939–946
  16. Watts DC. Reaction kinetics and mechanics in photo-polymerised networks. Dent Mater. 2005;21:27–35
  17. Vallittu PK. A review of fibre-reinforced denture base resins. J Prosthodont. 1996;5:270–276
  18. Vallittu PK. Comparison of the in vitro fatigue resistance of acrylic resin removable partial denture reinforced with continuous glass fibres or metal wires. J Prosthodont. 1996;5:115–121
  19. Vallittu PK. Comparison of two different silane compounds used for improving adhesion between fibres and acrylic denture base material. J Oral Rehabil. 1993;20:533–539
  20. Vallittu PK, Narva K. Impact strength of a modified continuous glass fibre-poly (methyl methacrylate). Int J Prosthodont. 1997;10:142–148
  21. Vallittu PK, Lassila VP, Lappalainen R. Acrylic resin-fibre composite. Part I: The effect of fibre concentration on fracture resistance. J Prosthet Dent. 1994;71:607–612
  22. Stipho HD. Repair of acrylic resin denture base reinforced with glass fibre. J Prosthet Dent. 1998;80:546–550
  23. Ladizesky NH, Cheng YY, Chow TW, Ward IM. Acrylic resin reinforced with chopped high performance polyethylene fibre properties and denture construction. Dent Mater. 1993;9:128–135
  24. Dyer SR, Lassila LVJ, Jokinen M, Vallittu PK. Effect of fibre position and orientation on fracture load of fibre reinforced composite. Dent Mater. 2004;20:947–955
  25. Vallittu PK. The effect of void space and polymerization time on transverse strength of acrylic-glass fibre composite. J Oral Rehabil. 1995;22:257–261
  26. Miettinen VM, Vallittu PK. Water sorption and solubility of glass fibre-reinforced denture polymethyl methacrylate. J Prosthet Dent. 1997;77:531–534
  27. Vishu S. Handbook of plastic testing technology. 2nd ed.. New York: John Wiley; 1998;p. 546
  28. Lastumaki TM, Lassila LV, Vallittu PK. The semi-interpenetrating polymer network matrix of fibre-reinforced composite and its effect on the surface adhesive properties. J Mater Sci Mater Med. 2003;14:803–809
  29. Lassila LV, Tezvergil A, Lahdenpera M, Alander P, Shinya A, Vallittu PK. Evaluation of some properties of two fibre reinforced composite materials. Acta Odonto Scand. 2005;63:196–204
  30. Söderholm KJ, Yang MC, Garcea I. Filler particle leachability of experimental dental composites. Eur J Oral Sci. 2000;108:555–560
  31. Watts DC, Cash AJ. Kinetic measurements of photo-polymerization contraction in resins and composites. Meas Sci Technol. 1991;2:788–794
  32. Halvorson RH, Erickson RL, Davidson CL. The effect of filler and silane content on conversion of resin-based composite. Dent Mater. 2003;19:327–333
  33. Tezvergil A, Lassila LVJ, Vallittu PK. The effect of fibre orientation on the polymerization shrinkage strain of fibre-reinforced composites. Dent Mater. 2006;22:610–616
  34. Sakaguchi RL, Wiltbank BD, Shah NC. Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites. Dent Mater. 2004;20:388–396
  35. Davidson CL, Feilzer AJ. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent. 1997;25:435–440
  36. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater. 2005;21:68–74

PII: S0109-5641(07)00161-3

doi: 10.1016/j.dental.2007.06.020

Dental Materials
Volume 24, Issue 5 , Pages 606-610 , May 2008

Article Tools

* Image Usage & Resolution