Dental Materials
Volume 24, Issue 5 , Pages 594-599 , May 2008

Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agents

Received 6 October 2006 ,Revised 27 March 2007 ,Accepted 6 June 2007.

References 

  1. Nomoto R, Uchida K, Hirasawa T. Effect of light intensity on polymerization of light-cured composite resins. Dent Mater J. 1994;13:198–205
  2. Unterbrink GL, Muessner R. Influence of light intensity on two restorative systems. J Dent. 1995;23:183–189
  3. Emami N, Söderholm KJ. How light irradiance and curing time affect monomer conversion in light-cured resin composites. Eur J Oral Sci. 2003;111:536–542
  4. Peutzfeldt A, Asmussen E. Resin composite properties and energy density of light cure. J Dent Res. 2005;84:659–662
  5. Hasegawa EA, Boyer DB, Chan DC. Hardening of dual-cured luting agents under composite resin inlays. J Prosthet Dent. 1991;66:187–192
  6. El-Mowafy OM, Rubo MH. Influence of composite inlay/onlay thickness on hardening of dual-cured resin luting agents. J Can Dent Assoc. 2000;66:147
  7. Ozyesil AG, Usumez A, Gunduz B. The efficiency of different light sources to polymerize composite beneath a simulated ceramic restoration. J Prosthet Dent. 2004;91:151–157
  8. Meng X, Yoshida K, Atsuta M. Surface hardness development of dual-cured resin luting agents through different thicknesses of ceramics. Dent Mater J. 2006;25:132–137
  9. Lee IB, Um CM. Thermal analysis on the cure speed of dual cured resin cements under porcelain inlays. J Oral Rehabil. 2001;28:186–197
  10. Darr AH, Jacobsen PH. Conversion of dual luting cements. J Oral Rehabil. 1995;22:43–47
  11. Hofmann N, Papsthart G, Hugo B, Klaiber B. Comparison of photo-activation versus chemical or dual-curing of resin-based luting agents regarding flexural strength, modulus and surface hardness. J Oral Rehabil. 2001;28:1022–1028
  12. Braga RR, Cesar PF, Gonzaqa CC. Mechanical properties of resin cements with different activation modes. J Oral Rehabil. 2002;29:257–262
  13. Lu H, Mehmood A, Chow A, Powers JM. Influence of polymerization mode on flexural properties of esthetic resin luting agents. J Prosthet Dent. 2005;94:549–554
  14. Feng L, Suh BI. The effect of curing modes on polymerization contraction stress of a dual cured composite. J Biomed Mater Res. 2006;76B:196–202
  15. Ferracane JL, Greener EH. The effect of resin formation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res. 1986;20:121–131
  16. Viljanen EK, Lassila LV, Skrifvars M, Vallittu PK. Degree of conversion and flexural properties of a dendrimer/methyl methacrylate copolymer: design of experiments and statistical screening. Dent Mater. 2005;21:172–177
  17. Rueggeberg FA, Craig RG. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res. 1988;67:932–937
  18. Asmussen E, Peutzfeldt A. Influence of pulse-delay curing on softening of polymer structures. J Dent Res. 2001;80:1570–1574
  19. Asmussen E, Peutzfeldt A. Two-step curing: influence on conversion and softening of a dental polymer. Dent Mater. 2003;19:466–470
  20. Soh MS, Yap AU. Influence of curing modes on crosslink density in polymer structures. J Dent. 2004;32:321–326
  21. International Organization for Standardization. ISO4049:2000:Dentistry-Polymer-based filling, restorative and luting materials, Geneva, Switzerland.
  22. Musanje L, Darvell BW. Polymerization of resin composite restorative materials: exposure reciprocity. Dent Mater. 2003;19:531–541
  23. Truffier-Boutry D, Demoustier-Champagne S, Devaux J, Biebuyck JJ, Mestdagh M, Larbanois P, et al. A physico-chemical explanation of the post-polymerization shrinkage in dental resins. Dent Mater. 2006;22:405–412

PII: S0109-5641(07)00159-5

doi: 10.1016/j.dental.2007.06.014

Dental Materials
Volume 24, Issue 5 , Pages 594-599 , May 2008

Article Tools

* Image Usage & Resolution