Dental Materials
Volume 24, Issue 5 , Pages 577-583 , May 2008

Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cements

  • Amerigo Cantoro

      Affiliations

    • Department of Dental Materials, University of Siena, Siena, Italy
    • ,
  • Cecilia Goracci

      Affiliations

    • Department of Dental Materials, University of Siena, Siena, Italy
    • Corresponding Author InformationCorresponding author at: Research Center for Dental Health, 19 Piazza Attias, 57125 Livorno, Italy. Tel.: +39 0586 892 283; fax: +39 0586 898 305.
    • ,
  • Federica Papacchini

      Affiliations

    • Department of Dental Materials, University of Siena, Siena, Italy
    • ,
  • Claudia Mazzitelli

      Affiliations

    • Department of Dental Materials, University of Siena, Siena, Italy
    • ,
  • Giovanni Maria Fadda

      Affiliations

    • Department of Clinical Dentistry, University of Siena, Siena, Italy
    • ,
  • Marco Ferrari

      Affiliations

    • Department of Dental Materials, University of Siena, Siena, Italy

Received 27 February 2007 ,Accepted 18 June 2007.

References 

  1. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963–971
  2. Abo-Hamar SE, Hiller KA, Jung H, Federlin M, Friedl KH, Schmalz G. Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel. Clin Oral Investig. 2005;9:161–167
  3. Yang B, Ludwig K, Adelung R, Kern M. Micro-tensile bond strength of three luting resins to human regional dentin. Dent Mater. 2006;22:45–56
  4. Goracci C, Cury AH, Cantoro A, Papacchini F, Tay FR, Ferrari M. Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces. J Adhes Dent. 2006;8:327–335
  5. Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T, et al. Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater. 2007;23:71–80
  6. Sensat ML, Brackett WW, Meinberg TA, Beatty MW. Clinical evaluation of two adhesive composite cements for the suppression of dentinal cold sensitivity. J Prosthet Dent. 2002;88:50–53
  7. de Souza Costa CA, Hebling J, Randall R. Human pulp response to resin cements used to bond inlay restorations. Dent Mater. 2006;22:954–962
  8. Piwowarczyk A, Lauer HC, Sorensen JA. In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials. J Prosthet Dent. 2004;92:265–273
  9. Carvalho RM, Pegoraro TA, Tay FR, Pegoraro LF, Silva NRFA, Pashley DH. Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentin. J Dent. 2004;32:55–65
  10. Goracci C, Sadek FT, Fabianelli A, Tay FR, Ferrari M. Evaluation of the adhesion of fiber posts to intraradicular dentin. Oper Dent. 2005;30:627–635
  11. Gerth HUV, Dammaschke T, Züchner H, Schäfer E. Chemical analysis and bonding reaction of RelyX Unicem and Bifix composites—A comparative study. Dent Mater. 2006;22:934–941
  12. Kubais A, Chakmakchi M, Palaghias G, Karanika-Kouma A, Eliades G. Interfacial characteristics of adhesive luting resins and composites with dentine. Dent Mater. 2007;23:829–839
  13. Daronch M, Rueggeberg FA, Moss L, De Goes F. Clinically relevant issues related to preheating composites. J Esthet Restor Dent. 2006;18:340–351
  14. Blalock JS, Holmes RG, Rueggeberg FA. Effect of temperature on unpolymerized composite film thickness. J Prosthet Dent. 2006;96:424–432
  15. Knight JS, Fraughn R, Norrington D. Effect of temperature on the flow properties of resin composite. Gen Dent. 2006;54:14–16
  16. Freedman G, Krejci I. Warming up to composites. Compend Contin Educ Dent. 2004;25:95–98
  17. Daronch M, Rueggeberg FA, De Goes MF, Giudici R. Polymerization kinetics of pre-heated composites. J Dent Res. 2006;85:38–43
  18. Daronch M, Rueggeberg FA, De Goes MF. Monomer conversion of pre-heated composite. J Dent Res. 2005;84:663–667
  19. Trujillo M, Newman SM, Stansbury JW. Use of near-IR to monitor the influence of external heating on dental composite photopolymerization. Dent Mater. 2004;20:766–777
  20. Lovell LG, Newman SM, Bowman CN. The effects of light intensity, temperature, and comonomer composition on the polymerization behaviour of dimethacrylate dental resins. J Dent Res. 1999;78:1469–1476
  21. Daronch M, Rueggeberg FA, Hall G, De Goes MF. Effect of composite temperature on in vitro intrapulpal temperature rise. Dent Mater. 2007;23:1283–1288
  22. Rueggeberg FA, Daronch M, Browning WD, De Goes MF. In vivo temperature measurement of pre-heated resin composite. J Dent Res. 2005;84(Special Issue A):[Abstract 0603]
  23. Elhejazi AA. The effects of temperature and light intensity on the polymerization shrinkage of light-cured composite filling materials. J Contemp Dent Pract. 2006;7:12–21
  24. Koibuchi H, Yasuda N, Nakabayashi N. Bonding to dentin with a self-etching primer: the effect of smear layers. Dent Mater. 2001;17:122–126
  25. Sundfeld RH, Dal’Acqua da Silva AMJ, Croll TP, de Oliveira CH, Fraga Briso AL, de Alexandre RS, et al. The effect of temperature on self-etching adhesive penetration. Compend Contin Educ Dent. 2006;27:552–556
  26. Van Landuyt KL, De Munck J, Snauwaert J, Coutinho E, Poitevin A, Yoshida Y, et al. Monomer–solvent phase separation in one-step self-etch adhesives. J Dent Res. 2005;84:183–188
  27. Kumbuloglu O, Lassila LV, User A, Vallittu PK. A study of the physical and chemical properties of four resin composite luting cements. Int J Prosthodont. 2004;17:357–363
  28. Algera TJ, Kleverlaan CJ, Prahl-Andersen B, Feilzer AJ. The influence of environmental conditions on the material properties of setting glass-ionomer cements. Dent Mater. 2006;22:852–856

PII: S0109-5641(07)00157-1

doi: 10.1016/j.dental.2007.06.012

Dental Materials
Volume 24, Issue 5 , Pages 577-583 , May 2008

Article Tools

* Image Usage & Resolution