Dental Materials
Volume 24, Issue 1 , Pages 83-89 , January 2008

Effect of adhesion to cavity walls on the mechanical properties of resin composites

  • Ma’an M. Nayif

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Science, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-Ku, Tokyo 113-8549, Japan
    • Corresponding Author InformationCorresponding author. Tel.: +81 5803 5483; fax: +81 3 5803 0195.
    • ,
  • Masatoshi Nakajima

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Science, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-Ku, Tokyo 113-8549, Japan
    • ,
  • Juthatip Aksornmuang

      Affiliations

    • Department of Prosthetic Dentistry, Faculty of Dentistry, Prince of Songkhla University, Hat Yai, Songkhla 90112, Thailand
    • ,
  • Masaomi Ikeda

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Science, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-Ku, Tokyo 113-8549, Japan
    • ,
  • Junji Tagami

      Affiliations

    • Cariology and Operative Dentistry, Department of Restorative Science, Graduate School, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-Ku, Tokyo 113-8549, Japan
    • Frontier Research on Molecular Destruction and Reconstruction of Tooth and Bone, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-Ku, Tokyo 113-8549, Japan

Received 10 August 2006 ,Accepted 15 February 2007.

References 

  1. Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci. 1997;105:97–116
  2. Calheros FC, Braga RR, Kawano Y, Ballester RY. Relationship between contraction stress and degree of conversion in restorative composites. Dent Mater. 2004;20:939–946
  3. Davidson CL, De Gee AJ. Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res. 1984;63:146–148
  4. Yoshikawa T, Sano H, Burrow MF, Tagami J, Pashley DH. Effects of dentin depth and cavity configuration on bond strength. J Dent Res. 1999;78:898–905
  5. Braga RR, Ferracane JL. Alternatives in polymerization contraction stress management. Crit Rev Oral Biol Med. 2004;15:176–184
  6. Choi KK, Ryu GJ, Choi SM, Lee MJ, Park SJ, Ferracane JL. Effects of cavity configuration on composite restoration. Oper Dent. 2004;29:462–469
  7. Sakaguchi RL, Ferracane JL. Polymerization shrinkage: effects of constraint and filling technique in composite restorations. Dent Mater. 2004;20:236–243
  8. Silikas N, Eliades G, Watts DC. Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent Mater. 2000;16:292–296
  9. Ferracane JL. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent Mater. 1985;1:11–14
  10. Rueggeberg FA, Ergle JW, Mettenburg DJ. Polymerization depths of contemporary light-curing units using microhardness. J Esthet Dent. 2000;12:340–349
  11. Bouschlicher MR, Rueggeberg FA, Wilson BM. Correlation of bottom-to-top surface microhardness and conversion ratios for a variety of resin composite compositions. Oper Dent. 2004;29:698–704
  12. Chung KH, Greener EH. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehabil. 1990;17:487–494
  13. Sano H, Ciucchi B, Matthews WG, Pashley DH. Tensile properties of mineralized and demineralized human and bovine dentin. J Dent Res. 1994;73:1205–1211
  14. Paul SJ, Leach M, Rueggeberg FA, Pashley DH. Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent. 1999;15:209–214
  15. Giannini M, Soares CJ, Carvalho RM. Ultimate tensile strength of tooth structures. Dent Mater. 2004;20:322–329
  16. Aksornmuang J, Nakajima M, Foxton RM, Junji Tagami J. Mechanical properties and bond strength of dual-cure resin composites to root canal dentin. Dent Mater. 2007;23:226–234
  17. DeWald JP, Ferracane JL. A comparison of four modes of evaluating depth of cure of light activated composites. J Dent Res. 1987;66:727–730
  18. Li Y, Swartz ML, Phillips RW, Moore BK, Roberts TA. Effect of filler content and size on properties of composites. J Dent Res. 1985;64:1396–1401
  19. Yamaga T, Sato Y, Akagawa Y, Taira M, Wakasa K, Yamaki M. Hardness and fracture toughness of four commercial visible light-cured composite resin veneering materials. J Oral Rehabil. 1995;22:857–863
  20. Kim KH, Ong JL, Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites. J Prosthet Dent. 2002;87:642–649
  21. Kawaguchi M, Fukushima T, Horibe T. Effect of monomer structure on the mechanical properties of light-cured composite resins. Dent Mater. 1989;8:40–45
  22. Asmussen E, Peutzfeldt A. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater. 1998;14:51–56
  23. Lin CT, Lee SY, Keh ES, Dong DR, Huang HM, Shih YH. Influence of silanization and filler fraction on aged dental composites. J Oral Rehabil. 2000;27:919–926
  24. Yoshida Y, Shirai K, Nakayama Y, Itoh M, Okazaki M, Shintani H, et al. Improved filler-matrix coupling in resin composites. J Dent Res. 2002;81:270–273
  25. Kleverlaan CJ, Feilzer AJ. Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater. 2005;21:1150–1157
  26. Labella R, Lambrechts P, Van Meerbeek B, Vanherle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater. 1999;15:128–137
  27. Feilzer AJ, De Gee , Davidson CL. Setting stress in resin composite in relation to configuration of the restoration. J Dent Res. 1987;66:1636–1639
  28. Braga RR, Ferracane JL. Contraction stress related to degree of conversion and reaction kinetics. J Dent Res. 2002;81:114–118

PII: S0109-5641(07)00053-X

doi: 10.1016/j.dental.2007.02.008

Dental Materials
Volume 24, Issue 1 , Pages 83-89 , January 2008

Article Tools

* Image Usage & Resolution