Dental Materials
Volume 24, Issue 1 , Pages 45-49 , January 2008

Adhesion between dental ceramic and bonding resin: Quantitative evaluation by Vickers indenter methodology

  • Sylvie Doucet

      Affiliations

    • Laboratoire de Biomatériaux Université Denis Diderot Paris 7, Assistance Publique-Hôpitaux de Paris, Paris, France
    • Department of Prosthodontics, University Denis Diderot Paris 7, 5 rue Garancière, 75006 Paris, France
    • Corresponding Author InformationCorresponding author at: UFR d’Odontologie, Université Paris 7, 5 rue Garancière, 75006 Paris, France. Tel.: +33 676604268.
    • ,
  • Bruno Tavernier

      Affiliations

    • Laboratoire de Biomatériaux Université Denis Diderot Paris 7, Assistance Publique-Hôpitaux de Paris, Paris, France
    • Department of Prosthodontics, University Denis Diderot Paris 7, 5 rue Garancière, 75006 Paris, France
    • ,
  • Pierre Colon

      Affiliations

    • Laboratoire de Biomatériaux Université Denis Diderot Paris 7, Assistance Publique-Hôpitaux de Paris, Paris, France
    • Department of Restorative Dentistry, University Denis Diderot Paris 7, 5 rue Garancière, 75006 Paris, France
    • ,
  • Bernard Picard

      Affiliations

    • Laboratoire de Biomatériaux Université Denis Diderot Paris 7, Assistance Publique-Hôpitaux de Paris, Paris, France
    • Department of Prosthodontics, University Denis Diderot Paris 7, 5 rue Garancière, 75006 Paris, France

Received 21 February 2006 ,Revised 7 January 2007 ,Accepted 19 January 2007.

References 

  1. Engel PA, Roshon DD. Indentation-debonding of an adhered surface layer. J Adhesion. 1979;10(33):237–253
  2. Dijken van JWV, Hasselrot , Örmin A, Olofsson AL. Restorations with extensive dentin/enamel-bonded ceramic coverage. A 5-year follow-up. Eur J Oral Sci. 2001;109(4):222–229
  3. Schultz P, Johansson A, Arvidson K. A retrospective study of Mirage ceramic inlays over up to 9 years. Int J Prosthodont. 2003;16(5):510–514
  4. Posselt A, Kerschbaum T. Longevity of 2328 chairside Cerec inlays and onlays. Int J Comput Dent. 2003;6(3):231–248
  5. Retief DH. Standardizing laboratory adhesion tests. Am J Dent. 1991;4:231–236
  6. Øilo G. Bond strength testing—what does it mean?. Int Dent J. 1993;43:492–498
  7. Della Bona A, Van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res. 1995;74(9):1591–1596
  8. Drummond JL, Thompson M, Boaz JS. Fracture surface examination of dental ceramics using fractal analysis. Dent Mater. 2005;21:586–589
  9. Spohr AM, Sobrinho LC, Consani S, Sinhoreti MA, Knowles JC. Influence of surface conditions and silane agent on the bond of resin to IPS Empress 2 ceramic. Int J Prosthodont. 2003;16(3):277–282
  10. Reich SM, Wichmann , Frankenberger R, Zajc D. Effect of surface treatment on the shear bond strength of three resin cements to a machinable feldspatic ceramic. J Biomed Mater Res B: Appl Biomater. 2005;74(2):740–746
  11. Asmussen E, Attal JP, Degrange M. Adherence of resin-based luting agents assessed by the energy of fracture. Acta Odontol Scand. 1993;51:235–240
  12. Moulin P, Picard B, Degrange M. Water resistance of resin bonded joint with time related to alloy surface treatment. J Dent. 1999;27:79–87
  13. Jardel V, Degrange M, Picard B, Derrien G. Correlation of topography to bond strength of etched ceramic. Int J Prosthodont. 1999;12(1):59–64
  14. Della Bona A, Shen C, Anusavice KJ. Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater. 2004;20:338–344
  15. Watanabee I, Nakabayashi N. Measurement methods for adhesion to dentine: the current status in Japan. J Dent. 1994;22:67–72
  16. Tantbirojn D, Cheng YS, Versluis A, Hodges JS, Douglas WH. Nominal shear or fracture mechanics in the assessment of composite-dentin adhesion?. J Dent Res. 2000;79(1):41–48
  17. Van Noort R, Noroozi S, Howard IC, Cardew G. A critique of bond strength measurements. J Dent. 1989;17:61–67
  18. Della Bona A, Anusavice KJ, Mecholsky JJ. Failure analysis of resin composite bonded to ceramic. Dent Mater. 2003;19:693–699
  19. Versluis A, Tantbirojn D, Douglas WH. Why do shear bond tests pull out dentin?. J Dent Res. 1997;76(6):1928–2307
  20. Hummel M, Kern M. Durability of the resin bond strength to the alumina ceramic Procera. Dent Mater. 2004;20(5):498–508
  21. Shen C, Oh WS, Williams JR. Effect of post-silanization drying on the bond strength of composite to ceramic. J Prosthet Dent. 2004;91(5):453–458
  22. Filho AM, Vieira LC, Araujo E, Monteiro S. Effect of different ceramic surface treatments on resin microtensile bond strength. J Prosthodont. 2004;13(1):28–35
  23. Sano H, Shono T, Sanoda H, Takatsu T, Ciucchi B, Carvalho R, et al. Relationship between surface area for adhesion and tensile bond strength. Dent Mater. 1994;10:236–240
  24. Conway HD, Thomsin JPR. The determination of bond strength of polymeric film by indentation debonding. J Adhesion Sci Technol. 1988;2(3):227–236
  25. Rosenfeld LG, Ritter JE, Lardner TJ. Measurement of interfacial fracture energy. Mater Res Soc Symp Proc. 1990;170:11–16
  26. Sura M, Rhinehart R. Indentation test for adhesion measurement of polyimide film. J Adhesion Sci Technol. 1990;4(3):161–168
  27. Sano H, Takatsu T, Ciucchi B, Russell CM, Pashley DH. Tensile properties of resin-infiltrated demineralised human dentin. J Dent Res. 1995;74(4):1093–1102
  28. Craig RG. Restorative dental materials. St. Louis: The C.V. Mosby Co.; 1985;
  29. De Jager N, Pallav P, Feilzer AJ. The apparent increase of the Young's modulus in thin cement layers. Dent Mater. 2004;20:457–462
  30. Özcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater. 2003;19:25–731
  31. Della Bona A, Anusavice KJ, Hood J. Effect of ceramic surface treatment on tensile bond strength to resin cement. Int J Prosthodont. 2002;15(3):248–253
  32. Dunn WJ, Söderholm KJM. Comparison of shear and flexural bond strength tests versus failure modes of dentin bonding systems. Am J Dent. 2001;14:297–303

PII: S0109-5641(07)00048-6

doi: 10.1016/j.dental.2007.01.010

Dental Materials
Volume 24, Issue 1 , Pages 45-49 , January 2008

Article Tools

* Image Usage & Resolution