Dental Materials
Volume 24, Issue 1 , Pages 9-17 , January 2008

Analyses of layer-thickness effects in bilayered dental ceramics subjected to thermal stresses and ring-on-ring tests

  • C.H. Hsueh

      Affiliations

    • Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6068, USA
    • Corresponding Author InformationCorresponding author. Tel.: +1 865 576 6586; fax: +1 865 574 6098.
    • ,
  • G.A. Thompson

      Affiliations

    • US Army Dental and Trauma Research Detachment, Great Lakes, IL 60088-5259, USA
    • ,
  • O.M. Jadaan

      Affiliations

    • College of Engineering, Mathematics and Science, University of Wisconsin-Platteville, WI 53818, USA
    • ,
  • A.A. Wereszczak

      Affiliations

    • Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6068, USA
    • ,
  • P.F. Becher

      Affiliations

    • Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6068, USA

Received 26 September 2006 ,Revised 22 December 2006 ,Accepted 28 December 2006.

References 

  1. Lawn BR, Deng Y, Thompson VP. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent. 2001;86:495–510
  2. White SN, Caputo AA, Vidjak FMA, Seghi RR. Moduli of rupture of layered dental ceramics. Dent Mater. 1994;10:52–58
  3. Molin MK, Karlsson SL, Kristiansen MS. Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater. 1996;12:245–249
  4. Zao DL, Botsis J, Drummond JL. Fracture studies of selected dental restorative composites. Dent Mater. 1997;13:198–207
  5. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent Mater. 2004;20:441–448
  6. Kelly JR. Perspectives on strength. Dent Mater. 1995;11:103–110
  7. Zeng KY, Oden A, Rowcliffe D. Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont. 1998;11:183–189
  8. Thompson GA. Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite. Dent Mater. 2000;16:235–243
  9. Higgs WAJ, Lucksanasombool P, Higgs RJED, Swain MV. Evaluating acrylic and glass-ionomer cement strength using the biaxial flexure test. Biomater. 2001;22:1583–1590
  10. Bhamra G, Palin WM, Fleming GJP. The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material. J Dent. 2002;30:153–160
  11. Isgrò G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent. 2003;90:465–473
  12. Guazzato M, Proos K, Quach L, Swain MV. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials. 2004;25:5045–5052
  13. Thompson GA. Determining the slow crack growth parameter and Weibull two-parameter estimates of bilaminate disks by constant displacement-rate flexural testing. Dent Mater. 2004;20:51–62
  14. Addison O, Fleming GJP. The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material. Dent Mater. 2004;20:286–292
  15. Vitman FF, Pukh VP. A method for determining the strength of sheet glass. Zavod Lab. 1963;29:863–867
  16. Kirstein AF, Woolley RM. Symmetrical bending of thin circular elastic plates on equally spaced point supports. J Res Natl Bur Stand. 1967;71C:1–10
  17. Wachtman JB, Capps W, Mandel J. Biaxial flexure tests of ceramic substrates. J Mater. 1972;7:188–194
  18. Ritter JE, Jakus K, Batakis A, Bandyopadhyay N. Appraisal of biaxial strength testing. J Non-Cryst Solids. 1980;38/39:419–424
  19. Shetty DK, Rosenfield AR, McGuire P, Bansal GK, Duckworth WH. Biaxial flexure tests for ceramics. Am Ceram Soc Bull. 1980;59:1193–1197
  20. ASTM C 1499-05 . Standard test method for monotonic equibiaxial flexural strength of advanced ceramics at ambient temperature. West Conshohocken, Pennsylvania: ASTM International; 2005;
  21. Hsueh CH, Lance MJ, Ferber MK. Stress distributions in thin bilayer discs subjected to ball-on-ring tests. J Am Ceram Soc. 2005;88:1687–1690
  22. Hsueh CH, Luttrelll CR, Becher PF. Analyses of multilayered dental ceramics subjected to biaxial flexure tests. Dent Mater. 2006;22:460–469
  23. Hsueh CH, Luttrelll CR, Becher PF. Modeling of multilayered disks subjected to biaxial flexure tests. Int J Solids Struct. 2006;43:6014–6025
  24. Hsueh CH, Evans AG. Residual stresses in metal/ceramic bonded strips. J Am Ceram Soc. 1985;68:241–248
  25. Hsueh CH. Modeling of elastic deformation of multilayers due to residual stresses and external bending. J Appl Phys. 2002;91:9652–9656
  26. Roark RJ, Young WC. Formulas for stress & strain. 5th ed. New York: McGraw-Hill; 1986;pp. 377-9
  27. Timoshenko S, Woinowsky-Krieger S. Theory of plates and shells. New York: McGraw-Hill; 1959;
  28. Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res. 1995;74:1253–1258
  29. Käse HR, Tesk JA, Case ED. Elastic constants of two dental porcelains. J Mater Sci. 1985;20:524–531
  30. Fischer H, Hemelik M, Telle R, Marx R. Influence of annealing temperature on the strength of dental glass ceramic materials. Dent Mater. 2005;21:671–677
  31. Rizkalla AS, Jones DW. Mechanical properties of commercial high strength ceramic core materials. Dent Mater. 2004;20:207–212
  32. Hsueh CH, Lee S. Modeling of elastic thermal stresses in two materials joined by a graded layer. Compos B. 2003;34:747–752
  33. Hsueh CH, DeJonghe LC, Lee CS. Modelling of thermal stresses in joining two layers with multi- and graded-interlayers. J Am Ceram Soc. 2006;89:251–257
  34. Fleming GJP, El-Lakwah SFA, Harris JJ, Marquis PM. The influence of interface roughness on bilayered ceramic specimen performance. Dent Mater. 2004;20:142–149

PII: S0109-5641(07)00039-5

doi: 10.1016/j.dental.2006.12.009

Dental Materials
Volume 24, Issue 1 , Pages 9-17 , January 2008

Article Tools

* Image Usage & Resolution