Dental Materials
Volume 23, Issue 11 , Pages 1373-1381 , November 2007

Evaluation of bond strength of soft relining materials to denture base polymers

  • Mustafa Murat Mutluay

      Affiliations

    • NIOM, Nordic Institute of Dental Materials, Haslum, Norway
    • University of Oslo, Faculty of Dentistry, Department of Prosthodontics, Oslo, Norway
    • ,
  • I. Eystein Ruyter

      Affiliations

    • NIOM, Nordic Institute of Dental Materials, Haslum, Norway
    • Corresponding Author InformationCorrespondence author at: NIOM, Nordic Institute of Dental Materials, Kirkeveien 71B, P.O. Box 70, NO-1305 Haslum, Norway. Tel.: +47 67 51 22 00; fax: +47 67 59 15 30.

Received 14 July 2006 ,Accepted 16 November 2006.

References 

  1. Mack PJ. Denture soft linings: clinical indications. Aust Dent J. 1989;34:454–458
  2. Al-Athel MS, Jagger RG. Effect of test method on the bond strength of a silicone resilient denture lining material. J Prosthet Dent. 1996;76:535–540
  3. Al-Athel MS, Jagger RG, Jerolimov V. Bone strength of resilient lining materials to various denture base resins. Int J Prosthodont. 1996;9:167–170
  4. Aydin AK, Terzioglu H, Akinay AE, Ulubayram K, Hasirci N. Bond strength and failure analysis of lining materials to denture resin. Dent Mater. 1999;15:211–218
  5. Baysan A, Parker S, Wright PS. Adhesion and tear energy of a long-term soft lining material activated by rapid microwave energy. J Prosthet Dent. 1998;79:182–187
  6. Braden M, Wright PS, Parker S. Soft lining materials—a review. Eur J Prosthodont Restor Dent. 1995;3:163–174
  7. Kulak-Ozkan Y, Sertgoz A, Gedik H. Effect of thermocycling on tensile bond strength of six silicone-based, resilient denture liners. J Prosthet Dent. 2003;89:303–310
  8. Kutay O, Bilgin T, Sakar O, Beyli M. Tensile bond strength of a soft lining with acrylic denture base resins. Eur J Prosthodont Restor Dent. 1994;2:123–126
  9. Kutay O. Comparison of tensile and peel bond strengths of resilient liners. J Prosthet Dent. 1994;71:525–531
  10. Mack PJ. Denture soft linings: materials available. Aust Dent J. 1989;34:517–521
  11. McCabe JF. A polyvinylsiloxane denture soft lining material. J Dent. 1998;26:521–526
  12. McCabe JF, Carrick TE, Kamohara H. Adhesive bond strength and compliance for denture soft lining materials. Biomaterials. 2002;23:1347–1352
  13. Meşe A, Güzel KG, Uysal E. Effect of storage duration on tensile bond strength of acrylic or silicone-based soft denture liners to a processed denture base polymer. Acta Odontol Scand. 2005;63:31–35
  14. Pinto JR, Mesquita MF, Henriques GE, de Arruda Nobilo MA. Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners. J Prosthet Dent. 2002;88:516–521
  15. Qudah S, Harrison A, Huggett R. Soft lining materials in prosthetic dentistry: a review. Int J Prosthodont. 1990;3:477–483
  16. Sertgoz A, Kulak Y, Gedik H, Taskonak B. The effect of thermocycling on peel strength of six soft lining materials. J Oral Rehabil. 2002;29:583–587
  17. Wright PS. Characterization of the adhesion of soft lining materials to poly (methyl methacrylate). J Dent Res. 1982;61:1002–1005
  18. Wright PS. Observations on long-term use of a soft-lining material for mandibular complete dentures. J Prosthet Dent. 1994;72:385–392
  19. Amin WM, Fletcher AM, Ritchie GM. The nature of the interface between polymethyl methacrylate denture base materials and soft lining materials. J Dent. 1981;9:336–346
  20. Schenk I, Schroder V, Jüde HD. Bewertung der Haftfestigkeit von weichbleibenden Underfütterungskunststoffen auf A-Silikonbasis zu PMMA-Prothesenbasiskunststoffen. Dtsch Zahnärztl Z. 2002;57:241–245
  21. Baysan A, Whiley R, Wright PS. Use of microwave energy to disinfect a long-term soft lining material contaminated with Candida albicans or Staphylococcus aureus. J Prosthet Dent. 1998;79:454–458
  22. El-Hadary A, Drummond JL. Comparative study of water sorption, solubility, and tensile bond strength of two soft lining materials. J Prosthet Dent. 2000;83:356–561
  23. ASTM D 429-81. Standard Test Methods for Rubber Property—Adhesion to rigid substrates. Annual book of ASTM standards. West Consohocken, PA: ASTM; 1998.
  24. Braden M. Polymeric dental materials. Berlin: Springer-Verlag; 1997;p. 101–113
  25. Emmer TJ, Emmer TJ, Vaidynathan J, Vaidynathan TK. Bond strength of permanent soft denture liners bonded to the denture base. J Prosthet Dent. 1995;74:595–601
  26. Cecile G, Javid TJ, Colaizzi FA, Gibbs CG. Biting strength and chewing forces in complete denture wearers. J Prosthet Dent. 1990;63:549–553
  27. Mutluay MM, Ruyter IE. Evaluation of adhesion of chairside hard relining materials to denture base polymers. J Prosthet Dent. 2005;94:445–452
  28. Jagger RG, Al-Athel MS, Jagger DC, Vowles RW. Some variables influencing the bond strength between PMMA and a silicone denture lining material. Int J Prosthodont. 2002;15:55–58
  29. Ruyter IE, Øysaed H. Conversion in denture base polymer. J Biomed Mater Res. 1982;16:741–754
  30. Sarac YS, Basoglu T, Ceylan GK, Sarac D, Yapici O. Effect of denture base surface pretreatment on microleakage of a silicone-based resilient liner. J Prosthet Dent. 2004;92:283–287
  31. Kinloch AJ, Young RJ. Fracture behaviour of polymers. London: Applied Science Publishers; 1983;p. 398–411

PII: S0109-5641(06)00314-9

doi: 10.1016/j.dental.2006.11.014

Dental Materials
Volume 23, Issue 11 , Pages 1373-1381 , November 2007

Article Tools

* Image Usage & Resolution