Dental Materials
Volume 23, Issue 5 , Pages 539-548 , May 2007

Efficient 3D finite element analysis of dental restorative procedures using micro-CT data

  • Pascal Magne

      Affiliations

    • Corresponding Author InformationTel.: +213 740 4239; fax: +213 740 6778.

Received 3 November 2005 ,Revised 23 March 2006 ,Accepted 27 March 2006.

References 

  1. Satava RM. The scientific method is dead—long live the (new) scientific method. Surg Innov. 2005;12:173–176
  2. Korioth TW, Versluis A. Modeling the mechanical behavior of the jaws and their related structures by finite element (FE) analysis. Crit Rev Oral Biol Med. 1997;8:90–104
  3. Ausiello P, Apicella A, Davidson CL, Rengo S. 3D-finite element analyses of cusp movements in a human upper premolar, restored with adhesive resin-based composites. J Biomech. 2001;34:1269–1277
  4. Ausiello P, Apicella A, Davidson CL. Effect of adhesive layer properties on stress distribution in composite restorations—a 3D finite element analysis. Dent Mater. 2002;18:295–303
  5. Ausiello P, Rengo S, Davidson CL, Watts DC. Stress distributions in adhesively cemented ceramic and resin-composite class II inlay restorations: a 3D-FEA study. Dent Mater. 2004;20:862–872
  6. Cattaneo PM, Dalstra M, Frich LH. A three-dimensional finite element model from computed tomography data: a semi-automated method. Proc Inst Mech Eng [H]. 2001;215:203–213
  7. Cattaneo PM, Dalstra M, Melsen B. The transfer of occlusal forces through the maxillary molars: a finite element study. Am J Orthod Dentofacial Orthop. 2003;123:367–373
  8. Cattaneo PM, Dalstra M, Melsen B. The finite element method: a tool to study orthodontic tooth movement. J Dent Res. 2005;84:428–433
  9. Tantbirojn D, Versluis A, Pintado MR, DeLong R, Douglas WH. Tooth deformation patterns in molars after composite restoration. Dent Mater. 2004;20:535–542
  10. Versluis A, Tantbirojn D, Pintado MR, DeLong R, Douglas WH. Residual shrinkage stress distributions in molars after composite restoration. Dent Mater. 2004;20:554–564
  11. Lin CL, Chang CH, Wang CH, Ko CC, Lee HE. Numerical investigation of the factors affecting interfacial stresses in an MOD restored tooth by auto-meshed finite element method. J Oral Rehabil. 2001;28:517–525
  12. Lin CL, Chang CH, Ko CC. Multifactorial analysis of an MOD restored human premolar using auto-mesh finite element approach. J Oral Rehabil. 2001;28:576–585
  13. Verdonschot N, Fennis WM, Kuijs RH, Stolk J, Kreulen CM, Creugers NH. Generation of 3D finite element models of restored human teeth using micro-CT techniques. Int J Prosthodont. 2001;14:310–315
  14. Panitvisai P, Messer HH. Cuspal deflection in molars in relation to endodontic and restorative procedures. J Endod. 1995;21:57–61
  15. Jantarat J, Panitvisai P, Palamara JE, Messer HH. Comparison of methods for measuring cuspal deformation in teeth. J Dent. 2001;29:75–82
  16. Jantarat J, Palamara JE, Messer HH. An investigation of cuspal deformation and delayed recovery after occlusal loading. J Dent. 2001;29:363–370
  17. Douglas WH. Methods to improve fracture resistance of teeth. In: Vanherle G, Smith DC, editors. International symposium on posterior composite resin restorative materials. Symposium sponsored by 3M, St. Paul, MN. The Netherlands: Peter Szulc Publishing Company; 1995. p. 433–41.
  18. Hood JAA. Methods to improve fracture resistance of teeth. In: Vanherle G, Smith DC, editors. International symposium on posterior composite resin restorative materials. Symposium sponsored by 3M, St. Paul, MN. The Netherlands: Peter Szulc Publishing Company; 1995. p. 443–50.
  19. Morin DL, Douglas WH, Cross M, DeLong R. Biophysical stress analysis of restored teeth: experimental strain measurements. Dent Mater. 1988;4:41–48
  20. Morin DL, Cross M, Voller VR, Douglas WH, DeLong R. Biophysical stress analysis of restored teeth: modeling and analysis. Dent Mater. 1988;4:77–84
  21. Manhart J, Chen HY, Neuerer P, Scheibenbogen-Fuchsbrunner A, Hickel R. Three-year clinical evaluation of composite and ceramic inlays. Am J Dent. 2001;14:95–99
  22. Mehl A, Kunzelmann KH, Folwaczny M, Hickel R. Stabilization effects of CAD/CAM ceramic restorations in extended MOD cavities. J Adhes Dent. 2004;6:239–245
  23. Magne P, Belser U. Bonded porcelain restorations in the anterior dentition—a biomimetic approach. Chicago: Quintessence Publishing Co.; 2002;
  24. Anusavice KJ, Hojjatie B. Influence of incisal length of ceramic and loading orientation on stress distribution in ceramic crowns. J Dent Res. 1988;67:1371–1375
  25. Craig RG, Peyton FA, Johnson DW. Compressive properties of enamel, dental cements, and gold. J Dent Res. 1961;40:936–945
  26. Eldiwany M, Powers JM, George LA. Mechanical properties of direct and post-cured composites. Am J Dent. 1993;6:222–224
  27. Farah JW, Craig RG, Meroueh KA. Finite element analysis of three- and four-unit bridges. J. Oral Rehabil. 1989;16:603–611
  28. McGuiness NJ, Wilson AN, Jones ML, Middleton J. A stress analysis of the periodontal ligament under various orthodontic loadings. Eur J Orthod. 1991;13:231–242
  29. Nakayama WT, Hall DR, Grenoble DE, Katz JL. Elastic properties of dental resin restorative materials. J Dent Res. 1974;53:1121–1126

PII: S0109-5641(06)00090-X

doi: 10.1016/j.dental.2006.03.013

Dental Materials
Volume 23, Issue 5 , Pages 539-548 , May 2007

Article Tools

* Image Usage & Resolution