Dental Materials
Volume 23, Issue 4 , Pages 442-449 , April 2007

Properties and cyclic fatigue of glass infiltrated tape cast alumina cores produced using a water-based solvent

  • Nam-Sik Oh

      Affiliations

    • Department of Dentistry, Inha University, Incheon, Republic of Korea
    • ,
  • Dae-Joon Kim

      Affiliations

    • Department of Advanced Material Engineering, Sejong University, Seoul, Republic of Korea
    • ,
  • Joo L. Ong

      Affiliations

    • Department of Biomedical Engineering, University of Tennessee, Memphis, TN, USA
    • ,
  • Ho-Young Lee

      Affiliations

    • Department of Prosthodontics, Yonsei University, College of Dentistry, 134 Sinchon-Dong, Seodaemun-Gu, Seoul 120-749, Republic of Korea
    • ,
  • Keun-Woo Lee

      Affiliations

    • Department of Prosthodontics, Yonsei University, College of Dentistry, 134 Sinchon-Dong, Seodaemun-Gu, Seoul 120-749, Republic of Korea
    • Corresponding Author InformationCorresponding author. Tel.: +82 2 2228 3158; fax: +82 2 312 3598.

Received 21 September 2005 ,Accepted 21 February 2006.

References 

  1. Campbell SD. A comparative strength study of metal ceramic and all-ceramic esthetic materials: modulus of rupture. J Prosthet Dent. 1989;62:476–479
  2. Chiche GJ, Pinault A. Esthetics of anterior fixed prosthodontics. Quintessence Publishing Co. Inc.; 1994;p. 97–113
  3. Scherrer S, Mojon P, Belser U, Meyer JM. The vita hi-ceram crown system: a clinical and laboratory investigation. J Dent Res. 1988;67:214;[Abstract no. 812)
  4. Andersson M, Oden A. A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain. Acta Odontol Scand. 1993;51:59–64
  5. Dong JK, Luthy H, Wohlwend A, Scharer P. Heat-pressed ceramics: technology and strength. Int J Prosthodont. 1992;5:9
  6. Dickinson AJ, Moore BK, Harris RK, Dykema RW. A comparative study of the strength of aluminous porcelain and all-ceramic crowns. J Prosthet Dent. 1989;61:297–304
  7. Dunn B, Levy MN, Reisbick MH. Improving the fracture resistance of dental ceramic. J Dent Res. 1977;56:1209–1213
  8. Hondrum SO, O’Brien WJ. The strength of alumina and magnesia core crowns. Int J Prosthodont. 1988;1:67–72
  9. Beham G. IPS-Empress: a new ceramic technology. Ivoclar-Vivadent Rep. 1990;6:1–13
  10. Holand W. Materials science fundamentals of the IPS Empress 2 glass-ceramic. Ivoclar Vivadent Rep. 1998;12:3–10
  11. Schweiger M, Holand W, Frank M. IPS Empress 2: a new pressable high-strength glass-ceramic for esthetic allceramic restorations. Quintessence Dent Technol. 1999;22:143–151
  12. Sorensen J, Cruz M, Mito W. Research evaluations of a lithium disilicate restorative system: IPS Empress 2. Signature. 1999;4:4–10
  13. Shearer B, Gough MB, Setchell DJ. Influence of marginal configuration and porcelain addition on the fit of In-Ceram crowns. Biomaterials. 1996;17(19):1891–1895
  14. Oh NS, Lee KW, Lee MH, Kim DJ, Lee SH. Marginal fit of glass infiltrated alumina core fabricated from alumina tapes. J Korean Acad Prosthodont. 1998;36:832–845
  15. Grey NJ, Piddock V, Wilson MA. In vitro comparison of conventional crowns and a new all-ceramic system. J Dent. 1993;21(1):47–51
  16. Probster L, Diehl J. Slip-casting alumina ceramics for crown and bridge restorations. Quintessence Int. 1992;23(1):25–31
  17. Siervo S, Bandettini B, Siervo P, Falleni A, Siervo R. The CELAY system: a comparison of the fit of direct and indirect fabrication techniques. Int J Prosthodont. 1994;7:434–439
  18. Oden A, Andersson M, Krystek-Ondracek I, Magnusson D. Five-year clinical evaluation of Procera AllCeram crowns. J Prosthet Dent. 1998;80:450–456
  19. Wagner WC, Chu TM. Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics. J Prosthet Dent. 1996;76:140–144
  20. Oh NS, Kim ES, Lee KW, Han JS, Kim DJ, Lee MH. A new manufacturing method of all ceramic restoration using alumina tape and presentation of clinical cases. J Korean Acad Prosthodont. 2000;38:800–805
  21. Kim DJ, Lee MH. Mechanical properties of tape-cast alumina–glass dental composites. J Am Ceram Soc. 1999;82:3167–3172
  22. Kim DJ, Lee MH, Kim CE. Fabrication of In-Ceram core by sheet forming process. Bioceramics. 1997;10:211–214
  23. Kim DJ, Lee MH, Lee DY, Han JS. A comparison of mechanical properties of all-ceramic alumina dental crowns prepared from aqueous- and non-aqueous-based tape casting. J Biomed Mater Res. 2000;53:314–319
  24. Chantikul P, Anstis GR, Lawn BR, Marshall DB. A ceitical evaluation of indentation techniques for measuring fracture toughness. II. Strength method. J Am Ceram Soc. 1981;64:539–543
  25. Marshall DB, Noma T, Evans AG. A simple method for determining elastic-modulous-to-hardness ratios using Knoop indentation measurements. Commun Am Ceram Soc. 1982;65:C175–C176
  26. Shetty D, Rosenfield A, McGuire P, Bansal G, DuckWorth W. Biaxial flexure tests for ceramics. Am Ceram Soc Bull. 1980;59:1193–1197
  27. Wolf WD, Vaidya KJ, Francis LF. Mechanical properties and analysis of alumina–glass dental composites. J Am Ceram Soc. 1996;79:1769–1776
  28. Mclean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J. 1965;119:251–267
  29. Ferro KJ, Myers ML, Graser GN. Fracture strength of full contoured ceramic crowns and porcelain-veneered crowns of ceramic copings. J Prosthet Dent. 1994;71(5):462–467
  30. Mante FK, Brantley WA, Dhuru VB, Ziebert GJ. Fracture toughness of high alumina core dental ceramics: the effect of water and artificial saliva. Int J Prosthodont. 1993;6:546–552
  31. Wolf WD, Francis LF, Lin CP, Douglas WH. Melt-infiltration processing and fracture toughness of alumina–glass dental composite. J Am Ceram Soc. 1993;76:2691–2694
  32. Whang SW, Lee KW. The physcial porperties of Y2O3-containing glass infiltrated alumina core made by pressureless powder packing method. J Korean Acad Prosthodont. 1997;35(1):221–243
  33. DeLong R, Sakaguchi RL, Douglas WH, Pintado MR. The wear of dental amalgam in an artificial mouth: a clinical correlation. Dent Mater. 1985;1:238–242

PII: S0109-5641(06)00067-4

doi: 10.1016/j.dental.2006.02.015

Dental Materials
Volume 23, Issue 4 , Pages 442-449 , April 2007

Article Tools

* Image Usage & Resolution