Dental Materials
Volume 23, Issue 4 , Pages 410-414 , April 2007

Improving the initial biocompatibility of a titanium surface using an Er,Cr:YSGG laser-powered hydrokinetic system

  • Her-Hsiung Huang

      Affiliations

    • Faculty of Dentistry, School of Dentistry, National Yang-Ming University, Taipei 112, Taiwan
    • ,
  • Yu-Chiao Chuang

      Affiliations

    • Institute of Oral Materials Science, Chung Shan Medical University, Taichung 402, Taiwan
    • ,
  • Zhi-Hwa Chen

      Affiliations

    • School of Medical Laboratory and Biotechnology, Chung Shan Medical University, Taichung 402, Taiwan
    • ,
  • Tien-Ling Lee

      Affiliations

    • Institute of Stomatology, Chung Shan Medical University, Taichung 402, Taiwan
    • ,
  • Chun-Cheng Chen

      Affiliations

    • Department of Dentistry, Chung Shan Medical University Hospital, Taichung 402, Taiwan
    • Corresponding Author InformationCorresponding author at: Department of Dentistry, Chung Shan Medical University Hospital, No. 110, Sec.1, Chien-Kuo North Road, Taichung 402, Taiwan. Tel.: +886 4 2471 8668x55011; fax: +886 4 2475 9065.

Received 26 May 2005 ,Accepted 8 February 2006.

References 

  1. Huang HH, Hsu CH, Pan SJ, He JL, Chen CC. Corrosion and cell adhesion behavior of TiN-coated and ion-nitrided titanium for dental application. Appl Surf Sci. 2005;244:252–256
  2. Faria AC, Beloti MM, Rosa AL. Nitric acid passivation does not affect in vitro biocompatibility of titanium. Int J Oral Maxillofac Implants. 2003;18:820–825
  3. Kim YH, Koak JY, Chang IT, Wennerberg A, Heo SJ. A histomorphometric analysis of the effects of various surface treatment methods on osseointegration. Int J Oral Maxillofac Implants. 2003;18:349–356
  4. De Maeztu MA, Alava JI, Gay-Escoda C. Ion implantation: surface treatment for improving the bone integration of titanium and Ti6Al4V dental implants. Clin Oral Implants Res. 2003;14:57–62
  5. Sohmura T, Tamasaki H, Ohara T, Takahashi J. Calcium-phosphate surface coating by casting to improve bioactivity of titanium. J Biomed Mater Res. 2001;58:478–485
  6. Wieland M, Textor M, Spencer ND, Brunette DM. Wavelength-dependent roughness: a quantitative approach to characterizing the topography of rough titanium surfaces. Int J Oral Maxillofac Implants. 2001;16:163–181
  7. Miller RJ. Treatment of the contaminated implant surface using the Er,Cr:YSGG laser. Implant Dent. 2004;13:165–170
  8. Jacboson B, Berger J, Kravitz R, Patel P. Laser pediatric crowns performed without anesthesia: a contemporary technique. J Clin Pediatric Dent. 2003;28:11–12
  9. Rosenberg SP. The use of the erbium, chromium: YSGG laser in microdentistry. Dent Today. 2003;22:70–73
  10. Chen WH. YSGG laser root canal therapy. Dent Today. 2002;21:74–77
  11. Lin S, Caputo AA, Eversole LR, Rizoiu I. Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent. 1999;82:451–455
  12. Rizoiu I, Kohanghadosh F, Kimmel AI, Eversole LR. Pulpal thermal responses to an erbium, chromium: YSGG pulsed laser hydrokinetic system. Oral Surg Oral Med Oral Pathol Oral Radiol Endodont. 1998;86:220–223
  13. Huang HH, Ho CT, Lee TH, Lee TL, Liao KK, Hsu CC. Effect of surface roughness of ground titanium on initial cell adhesion. Biomol Eng. 2004;21:93–97
  14. Nelissen JM, Torensma R, Pluyter M, Adema GJ, Raymakers RA, van Kooky Y, et al. Molecular analysis of its hematopoiesis supporting osteoblastic cell line U2-OS. Exp Hematol. 2000;28:422–432
  15. Freshney RI. Culture of animal cells- a manual of basic technique. New York: Wiley/Liss; 2000;p. 310
  16. Üşümez S, Orhan M, Üşümez A. Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system. Am J Orthod Dentofac Orthped. 2002;122:649–656
  17. Kim HM, Kokubo T, Fujibayashi S, Nishiguchi S, Nakamura T. Bioactive macroporous titanium surface layer on titanium substrate. J Biomed Mater Res. 2000;52:553–557
  18. Fujibayashi S, Neo M, Kim HM, Kokubo T, Nakamura T. Osteoinduction of porous bioactive titanium metal. Biomaterials. 2004;25:443–450
  19. Zhu X, Ong JL, Kim S, Kim K. Surface characteristics and structure of anodic oxide films containing Ca and P on a titanium implant material. J Biomed Mater Res. 2002;60:333–338
  20. Rosenberg R, Starosvetsky D, Gotman I. Surface modification of a low modulus Ti–Nb alloy for use in medical implants. J Mater Sci Lett. 2003;1:29–32
  21. Huang HH, Pan SJ, Lai YL, Lee TH, Chen CC, Lu FH. Osteoblast-like cell initial adhesion onto a network-structured titanium oxide layer. Scrip Mater. 2004;51:1017–1021
  22. Orsini G, Assenza B, Scarano A, Piatelli M, Piattelli A. Surface analysis of machined versus sandblasted and acid-etched titanium implants. Int J Oral Maxillofac Implants. 2000;15:779–784

PII: S0109-5641(06)00053-4

doi: 10.1016/j.dental.2006.02.012

Dental Materials
Volume 23, Issue 4 , Pages 410-414 , April 2007

Article Tools

* Image Usage & Resolution