Dental Materials
Volume 23, Issue 3 , Pages 288-295 , March 2007

Influence of cavity dimension and restoration methods on the cusp deflection of premolars in composite restoration

Received 19 April 2005 ,Revised 12 December 2005 ,Accepted 10 January 2006.

References 

  1. de Gee AF, Feilzer AJ, Davidson CL. True linear polymerization shrinkage of unfilled resins and composites determined with a linometer. Dent Mater. 1993;9:11–14
  2. Song YX, Inoue K. Linear shrinkage of photo-activated composite resins during setting. J Oral Rehabil. 2001;28:335–341
  3. Lee IB, Cho BH, Son HH, Um CM. A new method to measure the polymerization shrinkage kinetics of light cured composites. J Oral Rehabil. 2005;32:304–314
  4. Rosin M, Urban AD, Gartner C, Bernhardt O, Splieth C, Meyer G. Polymerization shrinkage-strain and micro-leakage in dentin-bordered cavities of chemically and light-cured restorative materials. Dent Mater. 2002;18:521–528
  5. Goldman M. Polymerization shrinkage of resin-based restorative materials. Aust Dent J. 1983;28:156–161
  6. Rees JS, Jacobsen PH. The polymerization shrinkage of composite resins. Dent Mater. 1989;5:41–44
  7. Lai JH, Johnson AE. Measuring polymerization shrinkage of photo-activated restorative materials by a water-filled dilatometer. Dent Mater. 1993;9:139–143
  8. Opdam NJ, Roeters FJ, Feilzer AJ, Verdonschot EH. Marginal integrity and postoperative sensitivity in Class 2 resin composite restorations in vivo. J Dent. 1998;26:555–562
  9. Carvalho RM, Pereira JC, Yoshiyama M, Pashley DH. A review of polymerization contraction: the influence of stress development versus stress relief. Oper Dent. 1996;21:17–24
  10. Segura A, Donly KJ. In vitro posterior composite polymerization recovery following hygroscopic expansion. J Oral Rehabil. 1993;20:495–499
  11. Alomari QD, Reinhardt JW, Boyer DB. Effect of liners on cusp deflection and gap formation in composite restorations. Oper Dent. 2001;26:406–411
  12. Suliman AH, Boyer DB, Lakes RS. Polymerization shrinkage of composite resins: comparison with tooth deformation. J Prosthet Dent. 1994;71:7–12
  13. Meredith N, Setchell DJ. In vitro measurement of cuspal strain and displacement in composite restored teeth. J Dent. 1997;25:331–337
  14. McCullock AJ, Smith BG. In vitro studies of cusp reinforcement with adhesive restorative material. Br Dent J. 1986;161:450–452
  15. Suliman AA, Boyer DB, Lakes RS. Interferometric measurements of cusp deformation of teeth restored with composites. J Dent Res. 1993;72:1532–1536
  16. Pearson GJ, Hegarty SM. Cusp movement of molar teeth with composite filling materials in conventional and modified MOD cavities. Br Dent J. 1989;166:162–165
  17. Jantarat J, Panitvisai P, Palamara JE, Messer HH. Comparison of methods for measuring cuspal deformation in teeth. J Dent. 2001;29:75–82
  18. Hood JA. Biomechanics of the intact, prepared and restored tooth: some clinical implications. Int Dent J. 1991;41:25–32
  19. Davidson CL, de Gee AJ. Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res. 1984;63:146–148
  20. Unterbrink GL, Liebenberg WH. Flowable resin composites as “filled adhesives”: literature review and clinical recommendations. Quintessence Int. 1999;30:249–257
  21. Versluis A, Douglas WH, Cross M, Sakaguchi RL. Does an incremental filling technique reduce polymerization shrinkage stresses?. J Dent Res. 1996;75:871–878
  22. Abbas G, Fleming GJ, Harrington E, Shortall AC, Burke FJ. Cuspal movement and microleakage in premolar teeth restored with a packable composite cured in bulk or in increments. J Dent. 2003;31:437–444
  23. Rees JS, Jagger DC, Williams DR, Brown G, Duguid W. A reappraisal of the incremental packing technique for light cured composite resins. J Oral Rehabil. 2004;31:81–84
  24. Rees JS, Jacobsen PH. Stresses generated by luting resins during cementation of composite and ceramic inlays. J Oral Rehabil. 1992;19:115–122
  25. Ericson D, Paulsson L, Sowiak H, Derand T. Reduction of cusp deflection resulting from composite polymerization shrinkage, using a light-transmitting cone. Scand J Dent Res. 1994;102:244–248
  26. Davidson CL, de Gee AJ. Light-curing units, polymerization, and clinical implications. J Adhes Dent. 2000;2:167–173
  27. Feilzer AJ, De Gee AJ, Davidson CL. Increased wall-to-wall curing contraction in thin bonded resin layers. J Dent Res. 1989;68:48–50
  28. Feilzer AJ, De Gee AJ, Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res. 1987;66:1636–1639
  29. Davidson CL, Feilzer AJ. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent. 1997;25:435–440
  30. Davidson CL, Van Zeghbroeck L, Feilzer AJ. Destructive stresses in adhesive luting cements. J Dent Res. 1991;70:880–882
  31. Craig RG, Powers JM. Restorative dental materials. 11th ed.. Mosby Inc.; 2002;p. 87–8
  32. Blank JT. Scientifically based rationale and protocol for use of modern indirect resin inlays and onlays. J Esthet Dent. 2000;12:195–208
  33. Alster D, Feilzer AJ, de Gee AJ, Davidson CL. Polymerization contraction stress in thin resin composite layers as a function of layer thickness. Dent Mater. 1997;13:146–150
  34. Watts DC, Cash AJ. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. Dent Mater. 1991;7:281–287
  35. Sakaguchi RL, Versluis A, Douglas WH. Analysis of strain gauge method for measurement of post-gel shrinkage in resin composites. Dent Mater. 1997;13:233–239
  36. Feng L, Suh BI. The effect of curing modes on polymerization contraction stress of a dual cured composite. J Biomed Mater Res Part B: App Biomater, 2005 (published online).

PII: S0109-5641(06)00037-6

doi: 10.1016/j.dental.2006.01.025

Dental Materials
Volume 23, Issue 3 , Pages 288-295 , March 2007

Article Tools

* Image Usage & Resolution