Dental Materials
Volume 23, Issue 1 , Pages 71-80 , January 2007

Bonding effectiveness of adhesive luting agents to enamel and dentin

  • K. Hikita

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
    • Institute of Medical Science, Health Sciences University of Hokkaido, 2-5 Ainosato, Kita-ku, Sapporo 002-8072, Japan
  • ,
  • B. Van Meerbeek

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
  • ,
  • J. De Munck

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
  • ,
  • T. Ikeda

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
    • Section of Cariology, Operative Dentistry and Endodontology, Department of Oral Health Science, Hokkaido University Graduate School of Dental Medicine, Kita 13 Nishi 7, Kita-ku, Sapporo 060-8586, Japan
  • ,
  • K. Van Landuyt

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
  • ,
  • T. Maida

      Affiliations

    • Institute of Medical Science, Health Sciences University of Hokkaido, 2-5 Ainosato, Kita-ku, Sapporo 002-8072, Japan
  • ,
  • P. Lambrechts

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
  • ,
  • M. Peumans

      Affiliations

    • Leuven BIOMAT Research Cluster, Department of Conservative Dentistry, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Kapucijnenvoer 7, 3000 Leuven, Belgium
    • Corresponding Author InformationCorresponding author. Tel.: +32 16 33 27 44; fax: +32 16 33 27 52.

Received 18 July 2005 ,Revised 1 December 2005 ,Accepted 1 December 2005.

References 

  1. Manhart J, Scheibenbogen-Füchsbrunner A, Chen HY, Hickel R. A 2-year clinical study of composite and ceramic inlays. Clin Oral Invest. 2000;4:192–198
  2. Mitchell CA, Abbariki M, Orr JF. The influence of luting cement on the probabilities of survival rate and modes of failure of cast full-coverage crowns. Dent Mater. 2000;16:198–206
  3. Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain veneers: a review of the literature. J Dent. 2000;28:163–177
  4. Burke FJ, Watts DC. Fracture resistance of teeth restored with dentin-bonded crowns. Quintessence Int. 1994;25:335–340
  5. Dietschi D, Maeder M, Meyer JM, Holz J. In vitro resistance to fracture of porcelain inlays bonded to tooth. Quintessence Int. 1990;21:823–831
  6. El Zohairy AA, De Gee AJ, Mohsen MM, Feilzer AJ. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater. 2003;19:575–583
  7. Ausiello P, Rengo S, Davidson CL, Watts DC. Stress distributions in adhesively cemented ceramic and resin-composite Class II inlay restorations: a 3D-FEA study. Dent Mater. 2004;20:862–872
  8. St-Georges AJ, Sturdevant JR, Swift EJ, Thompson JY. Fracture resistance of prepared teeth restored with bonded inlay restorations. J Prosthet Dent. 2003;89:551–557
  9. Roulet JF, Lösche GM. Tooth-coloured inlays and inserts—long term clinical results. In:  Dash W,  Watts DC editor. Proceedings of conference on: Clinically appropriate alternatives to amalgam: biophysical factors in restorative decision making, Munich, October 30–November 2. Trans Acad Mater. 1996;p. 200–215
  10. Ellakwa AE, Shortall ACC, Burke FJT, Marquis PM. Effects of grit blasting and silanization on bond strengths of a resin luting cement to Belleglass HP indirect composite. Am J Dent. 2003;16:53–57
  11. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28:215–235
  12. Mak YF, Lai SCN, Cheung GSP, Chan AWK, Tay FR, Pashley DH. Micro-tensile bond testing of resin cements to dentin and indirect resin composite. Dent Mater. 2002;18:609–621
  13. Carvalho RM, Pegoraro TA, Tay FR, Pegoraro LF, Silva NRFA, Pashley DH. Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent. 2004;32:55–65
  14. Ozturk N, Ayent F. Dentin bond strengths of two ceramic inlay systems after cementation with three different techniques and one bonding system. J Prosthet Dent. 2003;89:275–281
  15. Mota CS, Demarco F, Camacho GB, Powers F. Tensile bond strength of four resin luting agents bonded to bovine enamel and dentin. J Prosthet Dent. 2003;89:558–564
  16. Nikaido T, Cho E, Nakajima M, Tashiro H, Toba S, Burrow MF, et al. Tensile bond strengths of resin cements to bovine dentin using resin coating. Am J Dent. 2003;16:41A–46A
  17. Stewart PG, Jain P, Hodges J. Shear bond strength of resin cements to both ceramic and dentin. J Prosthet Dent. 2002;88:277–284
  18. Hannig M, Rahlf B, Schlichting B. Marginal behaviour of “Kulzer” composite inlays under simultaneous mechanical and thermal loading. Dtsch Zahnarztl Z. 1991;46:618–621
  19. Krejci I, Lutz R, Reiner M. Wear and marginal adaptation of composite resin inlays. J Prosthet Dent. 1993;69:425–430
  20. Mehl A, Godescha P, Kunzelmann KH, Hickel R. The margin integrity of composite and ceramic inlays in extensive cavities. Dtsch Zahnarztl Z. 1996;51:701–705
  21. Furukawa K, Inai N, Tagami J. The effects of luting resin bond to dentin on the strength of dentin supported by indirect resin composite. Dent Mater. 2002;18:136–142
  22. Blackman R, Barghi N, Duke E. Influence of ceramic thickness on the polymerization of light-cured resin cement. J Prosthet Dent. 1990;63:295–300
  23. Caughman WF, Chan DCN, Rueggeberg FA. Curing potential of dual-polymerizable resin cements in simulated clinical situations. J Prosthet Dent. 2001;86:101–106
  24. Braga RR, Cesar PF, Gonzaga CC. Mechanical properties of resin cements with different activation modes. J Oral Rehabil. 2002;29:257–262
  25. Hofmann N, Papsthart G, Hugo B, Klaiber B. Comparison of photo-activation versus chemical or dual-curing of resin-based luting cements regarding flexural strength, modulus and surface hardness. J Oral Rehabil. 2001;28:1022–1028
  26. Tanoue N, Koishi Y, Atsuta M, Matsumura H. Properties of dual-curable luting composites polymerized with single and dual curing modes. J Oral Rehabil. 2003;30:1015–1021
  27. Frankenberger R, Wolfgang OS, Baresel J, Trapper T, Krämer N, Petschelt A. Effect of surface treatment on fatigue behaviour between Tetric Ceram inlays and Variolink luting composite. Clin Oral Invest. 2001;5:260–265
  28. Yoshida K, Kamada K, Atsuta M. Effects of two silane coupling agents, a bonding agent, and thermal cycling on the bond strength of a CAD/CAM composite material cemented with two resin luting agents. J Prosthet Dent. 2001;85:184–189
  29. Peters AD, Meiers JC. Effect of polymerization mode of a dual-cured resin cement on time-dependent shear bond strength to porcelain. Am J Dent. 1996;9:264–268
  30. Rueggeberg FA, Caughman WF. The influence of light exposure on polymerization of dual-cure resin cement. Oper Dent. 1993;18:48–55
  31. Shimura R, Nikaido T, Yamauti M, Ikeda M, Tagami J. Influence of curing method and storage condition on microhardness of dual-cure resin cements. Dent Mater. 2005;24:70–75
  32. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963–971
  33. Ibarra G, Vargas MA, Armstrong SR, Cobb DS. Microtensile bond strength of self-etching adhesives to ground and unground enamel. J Adhes Dent. 2002;4:115–124
  34. Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, et al. Microtensile bond strength of eleven contemporary adhesives to enamel. Am J Dent. 2003;16:329–334
  35. Pashley DH, Tay FR. Agressiveness of contemporary self-etching adhesives. Part II: Etching effects on unground enamel. Dent Mater. 2001;17:430–444
  36. Kerby RE, Knobloch LA, Clelland N, Lilley H, Seghi R. Microtensile bond strengths of one-step and self-etching adhesive systems. Oper Dent. 2005;30:195–200
  37. Breschi L, Gobbi P, Falconi M, Mazzotti G, Prati G, Perdigao J. Ultra-morphology of self-etching adhesives on ground enamel: a high resolution SEM study. Am J Dent. 2003;16:57A–62A
  38. Hannig M, Bock H, Hoth-Hannig W. Inter-crystallite nanoretention of self-etching adhesives at enamel imaged by transmission electron microscopy. Eur J Oral Sci. 2002;110:464–470
  39. Perdigão J, Geraldeli S. Bonding characteristics of self-etch adhesives to intact versus prepared enamel. J Esthet Restor Dent. 2003;15:32–41
  40. Shimada Y, Senawongse P, Harnirattisai C, Burrow MF, Nakaoki Y, Tagami J. Bond strength of two adhesive systems to primary and permanent enamel. Oper Dent. 2002;27:403–409
  41. De Munck J, Van Meerbeek B, Vargas M, Iracki J, Van Landuyt K, Poitevin A, et al. One day bonding effectiveness of new self-etch adhesives to bur-cut enamel and dentin. Oper Dent. 2005;30:39–49
  42. Hashimoto M, Ohno H, Yoshida E, Hori M, Sano H, Kaga M, et al. Resin-enamel bonds made with self-etching primers on ground enamel. Eur J Oral Sci. 2003;111:447–453
  43. Van Landuyt K, Padmini K, De Munck J, Peumans M, Lambrechts P, Van Meerbeek B. Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent. 2006;34:77–85
  44. Miguez PA, Castro PS, Nunes MF, Walter R, Pereira PN. Effect of acid-etching on the enamel bond of two self-etching systems. J Adhes Dent. 2003;5:107–112
  45. Kanemura N, Sano H, Tagami J. Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces. J Dent. 1999;27:523–530
  46. Lopes GC, Marson FC, Vieira LC, de Caldeira AM, Baratieri LN. Composite bond strength to enamel with self-etching primers. Oper Dent. 2004;29:424–429
  47. Frankenberger R, Tay FR. Self-etch vs etch-and-rinse adhesives: effect of thermo-mechanical fatigue loading on marginal quality of bonded resin composite restorations. Dent Mater. 2005;21:397–412
  48. Tay FR, King NM, Suh BI, Pashley DH. Effect of delayed activation of light-cured resin composites on bonding of all-in one adhesives. J Adhes Dent. 2001;3:207–225
  49. Tay RF, Pashley DH, Yiu CKY, Sanares AME, Wei SHY. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part I. Single-step self-etch adhesive. J Adhes Dent. 2003;5:27–40
  50. Frankenberger R, Sindel J, Krämer N, Petschelt A. Dentin bond strength and marginal adaptation: direct composite resins vs ceramic inlays. Oper Dent. 1999;24:147–155
  51. Behr M, Rosentritt M, Regnet T, Lang R, Handel G. Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater. 2004;20:191–197
  52. Paul SJ, Scharer P. The dual bonding technique: a modified method to improve adhesive luting procedures. Int J Periodontics Restor Dent. 1997;17:536–545
  53. Magne P, Douglas WH. Porcelain veneers: dentin bonding optimization and biomimetic recovery of the crown. Int J Prosthodont. 1999;12:111–121
  54. Rosentritt M, Behr M, Lang R, Handel G. Influence of cement type on the marginal adaptation of all-ceramic MOD inlays. Dent Mater. 2004;20:463–469
  55. De Munck J, Van Meerbeek B, Inoue S, Vargas M, Yoshida Y, Armstrong S, et al. Micro-tensile bond strength of one-and two-step self-etch adhesives to bur-cut enamel and dentin. Am J Dent. 2003;16:414–420
  56. Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, et al. Microtensile bond strength of eleven modern adhesives to dentin. J Adhes Dent. 2001;3:237–245
  57. Brackett WW, Covey DA, St Germain HA. One-year clinical performance of a self-etching adhesive in class V resin composites cured by two methods. Oper Dent. 2002;27:218–222
  58. Van Dijken JWV. Durability of three simplified adhesive systems in Class V non-carious cervical dentin lesions. Am J Dent. 2004;17:27–32
  59. Peumans M, Kanumilli P, De Munck J, Van Landuyt K, Lambrechts P, Van Meerbeek B. Clinical effectiveness of contemporary adhesives: a review of current clinical trials. Dent Mater. 2005;21:864–881
  60. El Zohairy AA, De Gee AJ, Mohsen MM, Feilzer AJ. Effect of conditioning time of self-etching primers on dentin bond strength of three adhesive resin cements. Dent Mater. 2005;21:83–93
  61. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single-step adhesives are permeable membranes. J Dent. 2002;30:371–382
  62. Takahashi A, Sato Y, Uno S, Pereira PN, Sano H. Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater. 2002;18:263–268
  63. Jayasooriya PR, Pereira PNR, Nikaido T, Burrow MF, Tagami J. The effect of “resin coating” on the interfacial adaptation of composite inlays. Oper Dent. 2003;28:28–35
  64. Jayasooriya PR, Pereira PNR, Nikaido T, Tagami J. Efficacy of a resin coating on bond strengths of resin cement to dentin. J Esthet Restor Dent. 2003;15:105–113
  65. Van Landuyt K, Peumans M, De Munck J, Lambrechts P, Van Meerbeek B. Extension of a one-step self-etch adhesive into a multi-step adhesive. Dent Mater, in press.
  66. Shirai K, De Munck J, Yoshida Y, Inoue S, Lambrechts P, Shintani H, et al. Effect of cavity configuration and aging on the bonding effectiveness of six adhesives to dentin. Dent Mater. 2005;21:110–124

PII: S0109-5641(05)00361-1

doi: 10.1016/j.dental.2005.12.002

Dental Materials
Volume 23, Issue 1 , Pages 71-80 , January 2007