Modeling the investment casting of a titanium crown

References 

1. Papadopoulos T, Zinelis S, Vardavoulias M. A metallurgical study of the contamination zone at the surface of dental ti castings, due to the phosphate-bonded investment material: the protection efficacy of a ceramic coating. J Mater Sci. 1999;34:3639–3646
2. Bondioli DR, Bottino MA. Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures. J Prosthet Dent. 2004;91:541–547
   • Abstract
   • Full Text
   • Full-Text PDF (351 KB)
   • CrossRef
3. Lo TN, Lui TS, Chang E. Interfacial characterization of porcelain veneered on the pure titanium under vacuum firing. Mater Trans. 2004;45:3065–3070
4. Hench LL, Xynos ID, Edgar AJ, Buttery LDK, Polak JM, Zhong JP, et al. Gene activating glasses. J Inorg Mater. 2002;17:897–909
5. Lee PD, Hunt JD. A model of the interaction of porosity and the developing microstructure. In: Cross M, Campbell J, editors. Modelling of casting, welding and advanced solidification processes VII. Warrendale, PA, USA: TMS; 1995.
6. Lee PD, Chirazi A, See D. Modeling microporosity in aluminium–silicon alloys: a review. J Light Metals. 2001;1:15–30
7. Wang W, Kermanpur A, Lee PD, McLean M. Simulation of dendritic growth in the platform region of single crystal superalloy turbine blades. J Mater Sci. 2003;38:4385–4391
8. Lee PD, Chirazi A, Atwood RC, Wang W. Multiscale modelling of solidification microstructures, including microsegregation and microporosity, in an Al–Si–Cu alloy. Mater Sci Eng. 2004;365:57–65
9. Maijer DM, Gao YX, Lee PD, Lindley TC, Fukui T. A through-process model of an a356 brake caliper for fatigue life prediction. Metall Mater Trans A-Phys Metall Mater Sci. 2004;35A:3275–3288
10. Atwood RC, Lee PD, Curtis RV. Modeling the surface contamination of dental titanium investment castings. Dent Mater. 2005;21:178–186
    • Abstract
    • Full Text
    • Full-Text PDF (476 KB)
    • CrossRef
11. Elliott JC, Dover SD. X-ray microtomography. J Microsc Oxf. 1982;126:211–213
12. Stock SR. X-ray microtomography of materials. Int Mater Rev. 1999;44:141–164
13. Bjorndal L, Carlsen O, Thuesen G, Darvann T, Kreiborg S. External and internal macromorphology in 3d-reconstructed maxillary molars using computerized X-ray microtomography. Int Endod J. 1999;32:3–9
    • MEDLINE
    • CrossRef
14. Elliott JC, Wong FSL, Anderson P, Davis GR, Dowker SEP. Determination of mineral concentration in dental enamel from X-ray attenuation measurements. Connect Tissue Res. 1998;39:61–72
15. Gioka C, Bourauel C, Zinelis S, Eliades T, Silikas N, Eliades G. Titanium orthodontic brackets: structure, composition, hardness and ionic release. Dent Mater. 2004;20:693–700
    • Abstract
    • Full Text
    • Full-Text PDF (439 KB)
    • CrossRef
16. Talling RJ, Atwood RC, Lee PD, Curtis RV. Contamination of Ti–6Al–4V alloy during dental superplastic forming. In: 83rd general session & exhibition of the International Association for Dental Research (IADR) combining the 34th annual meeting of the AADR and 29th annual meeting of the CADR, Baltimore. MD, USA, March 9–12, Abstract 1476. 2005;
17. Atwood RC, Jones JR, Lee PD, Hench LL. Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography. Scripta Mater. 2004;51:1029–1033
18. Jolly M. Casting simulation: how well do reality and virtual casting match? State of the art review. Int J Cast Met Res. 2002;14:303–313
19. Beckermann C. Modelling of future needs macrosegregation: applications and future needs. Int Mater Rev. 2002;47:243–261
20. Wu M, Augthun M, Wagner I, Sahm PR. Casting of Ti prostheses and implants with the aid of numerical simulation. JOM. 2001;53:36–38
21. Wu MH, Schadich-Stubenrauch J, Augthun M, Sahm PR, Spiekermann H. Computer aided prediction and control of shrinkage porosity in titanium dental castings. Dent Mater. 1998;14:321–328
    • Abstract
    • Full Text
    • Full-Text PDF (717 KB)
    • CrossRef
22. Grong O, Shercliff HR. Microstructural modelling in metals processing. Prog Mater Sci. 2002;47:163–282
23. Rafii-Tabar H, Chirazi A. Multi-scale computational modelling of solidification phenomena. Phys Rep-Rev Sec Phys Lett. 2002;365:145–249
24. Kermanpur A, Tin S, Lee PD, McLean M. Integrated modeling for the manufacture of aerospace discs: grain structure evolution. JOM. 2004;56:72–78
25. Bird RB, Stewart WE, Lightfoot EN. Transport phenomena. John Wiley & Sons; 1960;
26. Atwood RC, Lee PD. A three-phase model of hydrogen pore formation during the equiaxed dendritic solidification of aluminium–silicon alloys. Metall Mater Trans. 2002;33B:209–221
27. Atwood RC, Lee PD. Simulation of the three dimensional morphology of solidification porosity in an aluminium–silicon alloy. Acta Mater. 2003;51:5447–5466
    • CrossRef
28. Rappaz M, Gandin CA. Probabilistic modeling of microstructure formation in solidification processes. Acta Metall. 1993;41:345–360
29. Spittle JA, Brown SGR. A cellular-automaton model of steady-state columnar-dendritic growth in binary-alloys. J Mater Sci. 1995;30:3989–3994
30. Saunders N, Li X, Miodownik AP, Schille JP. Computer modelling of materials properties, materials design approaches and experiences. Warrendale, PA, USA: Minerals Metals & Materials Soc; 2001;
31. Saunders N. In:  Blenkinsop PA,  Evans WJ,  Flower HM editor. Titanium’95: science and technology, eighth world conference on titanium. 22–26 October 1995, Birmingham, England (Institute of Materials, London). 1995;
32. Rutter JW, Chalmers B. Can J Phys. 1953;31:15
33. Yang XL, Lee PD, D'Souza N. Stray grain formation in the seed region of single-crystal turbine blades. JOM. 2005;57:40–44
34. Mills KC. Recommended values of thermophysical properties for selected commercial alloys. ASM Int. 2001;
35. Boettinger WJ, Williams ME, Coriell SR, Kattner UR, Mueller BA. Alpha case thickness modeling in investment castings. Metall Mater Trans B-Process Metall Mater Process Sci. 2000;31B:1419–1427