Dental Materials
Volume 23, Issue 1 , Pages 45-50 , January 2007

Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods

  • Mona Wolfart

      Affiliations

    • Corresponding Author InformationCorresponding author at: Department of Prosthodontics, Propaedeutics and Dental Materials, University Hospital Schleswig-Holstein-Campus Kiel, Arnold-Heller-Str. 16,24105 Kiel, Germany. Tel.: +49 431 597 2874; fax: +49 431 587 2860.
    • ,
  • Frank Lehmann
    • ,
  • Stefan Wolfart
    • ,
  • Matthias Kern

Received 14 July 2005 ,Accepted 30 November 2005.

References 

  1. Komine F, Tomic M, Gerds T, Strub JR. Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent. 2004;92:359–364
  2. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials. 1999;20:1–25
  3. Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002;4:7–22
  4. Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent. 2004;91:356–362
  5. Hummel M, Kern M. Durability of the resin bond strength to the alumina ceramic procera. Dent Mater. 2004;20:498–508
  6. Friederich R, Kern M. Resin bond strength to densely sintered alumina ceramic. Int J Prosthodont. 2002;15:333–338
  7. Wegner S, Gerdes W, Kern M. Influence of storage conditions on the resin bond strength to zirconia ceramic. J Dent Res. 2001;80:790;[Abstract No. 2111]
  8. Wegner S, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent. 2000;2:139–145
  9. Vogel K, Salz U. Factors influencing adhesion to Al2O3- and ZrO2-ceramic. J Dent Res. 1998;77:941;[Abstract No. 2475]
  10. Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater. 1998;14:64–71
  11. Schönbrodt M, Schmage P, Nergiz I, Platzer U. Haftfestigkeit zahnfarbener Wurzelstifte in Abhängigkeit von der Oberflächenbehandlung und dem Befestigungskomposit. Dtsch Zahnärztl Z. 2003;58:55–59
  12. Blatz MB, Sadan A, Soignet D, Blatz U, Mercante D, Chiche G. Long-term resin bond to densely sintered aluminum oxide ceramic. J Esthet Restor Dent. 2003;15:362–368Discussion 9
  13. Zhang Y, Lawn BR, Rekow ED, Thompson VP. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res. 2004;71B:381–386
  14. Fleming GJ, Jandu HS, Nolan L, Shaini FJ. The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material. J Dent. 2004;32:67–74
  15. Addison O, Fleming GJ. The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material. Dent Mater. 2004;20:286–292
  16. Kern M, Thompson VP. Bonding to a glass infiltrated alumina ceramic: adhesion methods and their durability. J Prosthet Dent. 1995;73:240–249
  17. Söderholm K-JM, Roberts MJ. Influence of water exposure on the tensile strength of composites. J Dent Res. 1990;69:1812–1816
  18. Wada T. Development of a new adhesive material and its properties. In:  Gettleman L, Vrijhoef MMA ,  Uchiyama Y editor. Proceedings of the international symposium on adhesive prosthodontics. Amsterdam, Netherlands: Chicago: Academy of Dental Materials. June 24, 1986;p. 9–18
  19. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. Strength and reliability of surface treated Y-TZP dental ceramics. J Biomed Mater Res. 2000;53:304–313
  20. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15:426–433
  21. Kern M. Clinical long-term survival of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures. Quintessence Int. 2005;36:141–147

PII: S0109-5641(05)00356-8

doi: 10.1016/j.dental.2005.11.040

Dental Materials
Volume 23, Issue 1 , Pages 45-50 , January 2007

Article Tools

* Image Usage & Resolution