Dental Materials
Volume 23, Issue 1 , Pages 17-23 , January 2007

Static and fatigue compression test for particulate filler composite resin with fiber-reinforced composite substructure

Received 6 April 2005 ,Revised 3 September 2005 ,Accepted 28 November 2005.

References 

  1. Kato H. Fatigue properties of dental alloys 12% Au–Pd–Ag alloys and type III gold alloy. Aichi-Gakuin J Dent Sci. 1989;27:1017–1027
  2. Manson JA, Hertzberg RW. Fatigue failure in polymers. CRC Crit Rev Macromol Sci. 1973;433–500
  3. Lohbauer U, von der Horst T, Frankenberger R, Krämer N, Petschelt A. Flexural fatigue behavior of resin composite dental restoratives. Dent Mater. 2003;19:435–440
  4. Köhler B, Rasmusson C-G, Ödman P. A five-year clinical evalution of class II composite resin restoration. J Dent. 2000;28:111–117
  5. Klinge S, Schmidt G, Frankenberger R, Pelka M. Clinical behavior of solitaire: one-year result. J Dent Res. 2000;97:185;(Abstr. No. 332)
  6. Söderholm KJM, Roberts MJ. Influence of water exposure on the tensile strength of composites. J Dent Res. 1990;69:1812–1818
  7. Braem MJA, Lambrechts P, Gladys S, Vanherle G. In vitro fatigue behavior of restorative composites and glass ionomers. Dent Mater. 1995;11:137–141
  8. Drummond JL. Cyclic fatigue of composite restorative materials. J Oral Rehabil. 1989;16:509–520
  9. Glodman M. Fracture properties of composite resin and glass ionomer cement dental restorative materials. J Biomed Mater Res. 1985;19:771–783
  10. Tyas M. Correlation between fracture properties and clinical performance of composite resin in class IV cavities. Aust Dent J. 1990;35:46–49
  11. Xu HHK, Schumacher GE, Eichmiller FC, Peterson RC, Antonucci JM, Mueller HJ. Continuous-fiber performs reinforcement of dental resin composite restorations. Dent Mater. 2003;19:523–530
  12. Ji-Myung BAE, Kyoung-Nam KIM, Hattori M, Hasega KWA, Yoshinari M, Kawada E, et al. Fatigue strength of particulate filler composite reinforced with fibers. Dent Mater. 2004;23:166–174
  13. Dyer SR, Lassila LVJ, Jokinen M, Vallittu PK. Effect of fiber position and orientation on fracture load of fiber reinforced composite. Dent Mater. 2004;20:947–955
  14. Lassila LVJ, Nohrstrom T, Vallittu PK. The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composite. Biomaterials. 2002;23:2221–2229
  15. Nohrstrom TJ, Vallittu PK, Yli-Urpo A. The effect of placement and quantity of glass fibers on the fracture resistance of interim fixed partial denture. Int J Prosthodont. 2000;13:72–80
  16. Vallittu PK. Curing of silane coupling agent and its effect on the transverse strength of autopolymerizing polymethylmethacrylate-glass fiber composite. J Oral Rehabil. 1997;24:124–130
  17. Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dent Mater. 2000;16:150–158
  18. Vallittu PK. Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers. J Prosthet Dent. 1999;81:318–326
  19. Dixon WJ, Mood AM. A method for obtaining and analyzing sensitivity data. J Am Stat Assoc. 1948;43:109–126
  20. Dieter JE. Mechanical metallurgy. New York: McGraw-Hill Book Co.; 1961;p. 446–9
  21. Maennig W. Statistical planning and evaluation of fatigue tests. Int J Fract. 1975;11:123–129
  22. Collins JA. Failure of materials in mechanical design: analysis, prediction, prevention. New York: John Wiley & Sons; 1981;p. 360–78
  23. Drummond JL, Mieschke KJ. Weibull models for the statistical analysis of dental composite data: aged in physiologic media and cyclic-fatigued. Dent Mater. 1991;7:25–34
  24. Weibull W. A statistical distribution function of wide applicability. J Appl Mech. 1951;18:293–301
  25. Vallittu PK, Ruyter IE, Ekstrand K. Effect of 180-week water storage on the flexural properties of E-glass and silica fiber acrylic resin composite. Int J Prosthodont. 2000;13:334–339
  26. Lastumäki TM, Lassila LVJ, Vallittu PK. Flexural properties of the bulk fiber-reinforced composite DC-Tell used in fixed partial dentures. Int J Prosthodont. 2001;14:22–26
  27. Little RE, Jebe EH. Fitting the P–S curve: statistical design of fatigue experiments. New York, Toronto: A Halsted Press Book: A division of John Wiley & Sons; 1975;p. 168–97
  28. Yamamoto M, Takahashi H. Tensile fatigue strength of light cure composite resin for posterior teeth. Dent Mater J. 1995;14:175–184
  29. Drummond JL, King TJ, Bapna MS, Koperski RD. Mechanical property evaluation of pressable restorative ceramic. Dent Mater. 2000;16:226–233
  30. Draughn RA. Compressive fatigue limits of composite restorative materials. J Dent Res. 1979;58:1093–1096
  31. Drummond JL, Bapna MS. Static and cyclic loading of fiber-reinforced dental resin. Dent Mater. 2003;19:226–231

PII: S0109-5641(05)00352-0

doi: 10.1016/j.dental.2005.11.041

Dental Materials
Volume 23, Issue 1 , Pages 17-23 , January 2007

Article Tools

* Image Usage & Resolution