Dental Materials
Volume 22, Issue 10 , Pages 896-902 , October 2006

Dynamics of composite polymerization mediates the development of cuspal strain

  • S. Bouillaguet

      Affiliations

    • Division of Cariology and Endodontology, School of Dental Medicine, University of Geneva, 19 rue Barthelemy Menn, 1205 Geneva, Switzerland
    • Corresponding Author InformationCorresponding author. Tel.: +41 22 379 41 07; fax: +41 22 379 41 01.
    • ,
  • J. Gamba

      Affiliations

    • Department of Industrial Systems and Micro-technology, School of Engineering, Yverdon les Bains, Switzerland
    • ,
  • J. Forchelet

      Affiliations

    • Department of Industrial Systems and Micro-technology, School of Engineering, Yverdon les Bains, Switzerland
    • ,
  • I. Krejci

      Affiliations

    • Division of Cariology and Endodontology, School of Dental Medicine, University of Geneva, 19 rue Barthelemy Menn, 1205 Geneva, Switzerland
    • ,
  • J.C. Wataha

      Affiliations

    • Department of Biology and Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, GA, USA

Received 8 April 2005 ,Revised 25 October 2005 ,Accepted 26 October 2005.

References 

  1. Ferracane JL. Developing a more complete understanding of stresses produced in dental composites during polymerization. Dent Mater. 2005;21:36–42
  2. Braga RR, Ferracane JL. Alternatives in polymerization contraction stress management. Crit Rev Oral Biol Med. 2004;15:176–184
  3. Davidson CL, de Gee AJ, Feilzer A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res. 1984;63:1396–1399
  4. Carvalho RM, Pereira JC, Yoshiyama M, Pashley DH. A review of polymerization contraction: the influence of stress development versus stress relief. Oper Dent. 1996;21:17–24
  5. Bouillaguet S. Biological risks of resin-based materials to the dentin-pulp complex. Crit Rev Oral Biol Med. 2004;15:47–60
  6. Manhart J, Chen H, Hamm G, Hickel R. Buonocore memorial lecture. Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition. Oper Dent. 2004;29:481–508
  7. Brunthaler A, Konig F, Lucas T, Sperr W, Schedle A. Longevity of direct resin composite restorations in posterior teeth. Clin Oral Invest. 2003;7:63–70
  8. de Gee AJ, Davidson CL, Smith A. A modified dilatometer for continuous recording of volumetric polymerization shrinkage of composite restorative materials. J Dent. 1981;9:36–42
  9. Stavridakis MM, Lutz F, Johnston WM, Krejci I. Linear displacement and force induced by polymerization shrinkage of resin-based restorative materials. Am J Dent. 2003;16:431–438
  10. Sakaguchi RL, Sasik CT, Bunczak MA, Douglas WH. Strain gauge method for measuring polymerization contraction of composite restoratives. J Dent. 1991;19:312–316
  11. Watts DC, Cash AJ. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. Dent Mater. 1991;7:281–287
  12. Sakaguchi RL, Wiltbank BD, Shah NC. Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites. Dent Mater. 2004;20:388–396
  13. Feilzer AJ, De Gee AJ, Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res. 1987;66:1636–1639
  14. Tantbirojn D, Versluis A, Pintado MR, DeLong R, Douglas WH. Tooth deformation patterns in molars after composite restoration. Dent Mater. 2004;20:535–542
  15. Sharp B. Electronic speckle pattern interferometry. Opt Lasers Eng. 1989;11:241–255
  16. Kishen A, Murukeshan VM, Krishnakumar V, Asundi A. Analysis on the nature of thermally induced deformation in human dentine by electronic speckle pattern interferometry (ESPI). J Dent. 2001;29:531–537
  17. Yap AU, Tan AC, Quan C. Non-destructive characterization of resin-based filling materials using electronic speckle pattern interferometry. Dent Mater. 2004;20:377–382
  18. Rodriguez D, Moreno V, Gallas M, Abeleira MT, Suarez D. In-plane electronic speckle pattern of interference (ESPI) with optical fibre system applied to the study of the human jaw. Med Eng Phys. 2004;26:371–378
  19. Price RB, Felix CA, Andreou P. Knoop hardness of ten resin composites irradiated with high-power LED and quartz-tungsten-halogen lights. Biomaterials. 2005;26:2631–2641
  20. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater. 2005;21:68–74
  21. Alvarez-Gayosso C, Barcelo-Santana F, Guerrero-Ibarra J, Saez-Espinola G, Canseco-Martinez MA. Calculation of contraction rates due to shrinkage in light-cured composites. Dent Mater. 2004;20:228–235
  22. Cohen ME, Leonard DL, Charlton DG, Roberts HW, Ragain JC. Statistical estimation of resin composite polymerization sufficiency using microhardness. Dent Mater. 2004;20:158–166
  23. Meredith N, Setchell DJ. In vitro measurement of cuspal strain and displacement in composite restored teeth. J Dent. 1997;25:331–337
  24. Palin WM, Fleming GJP, Nathwani H, Burke FJT, Randall RC. In vitro cuspal deflection and microleakage of maxillary premolars restored with novel low-shrink dental composites. Dent Mater. 2005;21:324–335
  25. Suliman AA, Boyer DB, Lakes RS. Interferometric measurements of cusp deformation of teeth restored with composites. J Dent Res. 1993;72:1532–1536
  26. Jantarat J, Palamara JE, Messer HH. An investigation of cuspal deformation and delayed recovery after occlusal loading. J Dent. 2001;29:363–370
  27. Labella R, Lambrechts P, Van Meerbeek B, Vanherle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater. 1999;15:128–137
  28. Kleverlaan CJ, Feilzer AJ. Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater. 2005;21:1150–1157
  29. Braga RR, Ballester RY, Ferracane JL. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater. 2005;21:962–970
  30. Stansbury JW, Trujillo-Lemon M, Lu H, Ding X, Lin Y, Ge J. Conversion-dependent shrinkage stress and strain in dental resins and composites. Dent Mater. 2005;21:56–67
  31. Yoshikawa T, Sano H, Burrow MF, Tagami J, Pashley DH. Effects of dentin depth and cavity configuration on bond strength. J Dent Res. 1999;78:898–905
  32. Bouillaguet S, Caillot G, Forchelet J, Cattani-Lorente M, Wataha JC, Krejci I. Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins. J Biomed Mater Res. 2005;72B:260–267

PII: S0109-5641(05)00303-9

doi: 10.1016/j.dental.2005.11.017

Dental Materials
Volume 22, Issue 10 , Pages 896-902 , October 2006

Article Tools

* Image Usage & Resolution