Dental Materials
Volume 22, Issue 7 , Pages 610-616 , July 2006

The effect of fiber orientation on the polymerization shrinkage strain of fiber-reinforced composites

Received 31 March 2005 ,Accepted 16 May 2005.

References 

  1. Leinfelder KF. New developments in resin restorative systems. J Am Dent Assoc. 1997;128:573–581
  2. Lutz F, Krejci I. Amalgam substitutes: a critical analysis. J Esthet Dent. 2000;12:146–159
  3. Davidson CL, Feilzer AJ. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent. 1997;25:435–440
  4. Freilich MA, Karmaker AC, Burstone CJ, Goldberg AJ. Development and clinical applications of a light-polymerized fiber-reinforced composite. J Prosthet Dent. 1998;80:311–318
  5. Vallittu PK, Sevelius C. Resin-bonded, glass fiber-reinforced composite fixed partial dentures: a clinical study. J Prosthet Dent. 2000;84:413–418
  6. Bae JM, Kim KN, Hasegawa K, Yoshinari M, Kawada E, Oda Y. Fatigue strengths of particulate filler composites reinforced with fibers. Dent Mater. 2004;23:166–174
  7. Meiers JC, Freilich MA. Conservative anterior tooth replacement using fiber-reinforced composite. Oper Dent. 2000;25:239–243
  8. Vallittu PK. Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers. J Prosthet Dent. 1999;81:318–326
  9. Lastumäki TM, Lassila LVJ, Vallittu PK. The semi-interpenetrating polymer network matrix of fiber-reinforced composite and its effect on the surface adhesive properties. J Mater Sci Mater Med. 2003;14:803–809
  10. Watts DC, Marouf AS, Al Hindi AM. Photo-polymerization shrinkage-stress kinetics in resin composites at standardized compliance: methods development. Dent Mater. 2003;19:1–11
  11. Schoch KF, Panackal PA, Frank PP. Real-time measurement of resin shrinkage during cure. Thermochim Acta. 2004;417:115–118
  12. Davidson CL, de Gee AJ, Feilzer A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res. 1984;63:1396–1399
  13. Condon JR, Ferracane JL. Assessing the effect of composite formulation on polymerization stress. J Am Dent Assoc. 2000;131:497–503
  14. Braga RR. Alternatives in polymerization contraction stress management. Crit Rev Oral Biol Med. 2004;15:176–184
  15. Nielsen LE. Mechanical properties of polymer and composites. New York: Marcel Dekker Inc; 1974;p. 468–88
  16. Dyer SR, Lassila LV, Jokinen M, Vallittu PK. Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dent Mater. 2004;20:947–955
  17. Tezvergil A, Lassila LV, Vallittu PK. The shear bond strength of bidirectional and random-oriented fibre-reinforced composite to tooth structure. J Dent. 2005;33:509–516
  18. Tezvergil A, Lassila LV, Vallittu PK. The effect of fiber orientation on the thermal expansion coefficients of fiber-reinforced composites. Dent Mater. 2003;19:471–477
  19. Sakaguchi RL, Sasik CT, Bunczak MA, Douglas WH. Strain gauge method for measuring polymerization contraction of composite restoratives. J Dent. 1991;19:312–316
  20. Sakaguchi RL, Ferracane JL. Stress transfer from polymerization shrinkage of a chemical-cured composite bonded to a pre-cast composite substrate. Dent Mater. 1998;14:106–111
  21. Sakaguchi RL, Versluis A, Douglas WH. Analysis of strain gage method for measurement of post-gel shrinkage in resin composites. Dent Mater. 1997;13:233–239
  22. Ferracane JL, Mitchem JC. Relationship between composite contraction stress and leakage in class V cavities. Am J Dent. 2003;16:239–243
  23. Sakaguchi RL, Wiltbank BD, Shah NC. Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites. Dent Mater. 2004;20:388–396
  24. Kim SH, Watts DC. Exotherm behavior of the polymer-based provisional crown and fixed partial denture materials. Dent Mater. 2004;20:383–387
  25. Kim SH, Watts DC. Polymerization shrinkage-strain kinetics of temporary crown and bridge materials. Dent Mater. 2004;20:88–95
  26. Hashinger DT, Fairhurst CW. Thermal expansion and filler content of composite resins. J Prosthet Dent. 1984;52:506–510
  27. Price RB, Rizkalla AS, Hall GC. Effect of stepped light exposure on the volumetric polymerization shrinkage and bulk modulus of dental composites and unfilled resin. Am J Dent. 2000;13:328–339
  28. Stone MA, Schwartz IF, Chandler HD. Residual stresses associated with post-cured shrinkage in GRP tubes. Comput Sci Technol. 1997;57:47–57
  29. Zhang L, Ernst LJ, Brouwer HR. Transverse behavior of a unidirectional composite (glass fibre reinforced unsaturated polyester). Part II. Influence of shrinkage strains. Mech Mater. 1998;27:37–61
  30. Watts DC. Reaction kinetics and mechanics in photo-polymerized networks. Dent Mater. 2005;21:27–35
  31. Silikas N, Al-Kheraif A, Watts DC. Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations. Biomaterials. 2005;26:197–204

PII: S0109-5641(05)00236-8

doi: 10.1016/j.dental.2005.05.017

Dental Materials
Volume 22, Issue 7 , Pages 610-616 , July 2006

Article Tools

* Image Usage & Resolution