Dental Materials
Volume 22, Issue 7 , Pages 602-609 , July 2006

Post-surface conditioning improves interfacial adhesion in post/core restorations

  • Francesca Monticelli

      Affiliations

    • Department of Restorative Dentistry and Dental Materials, University of Siena, Policlinico Le Scotte, Viale Bracci, 53100 Siena, Italy
    • Corresponding Author InformationCorresponding author. Tel.: +39 3384623264; fax: +39 0577233117.
    • ,
  • Manuel Toledano

      Affiliations

    • Department of Dental Materials, University of Granada, Granada, Spain
    • ,
  • Franklin R. Tay

      Affiliations

    • Paediatric Dentistry and Orthodontics, Faculty of Dentistry, The University of Hong Kong, Pokfulam, Hong Kong SAR, China
    • ,
  • Alvaro H. Cury

      Affiliations

    • Department of Restorative Dentistry and Dental Materials, University of Siena, Policlinico Le Scotte, Viale Bracci, 53100 Siena, Italy
    • ,
  • Cecilia Goracci

      Affiliations

    • Department of Restorative Dentistry and Dental Materials, University of Siena, Policlinico Le Scotte, Viale Bracci, 53100 Siena, Italy
    • ,
  • Marco Ferrari

      Affiliations

    • Department of Restorative Dentistry and Dental Materials, University of Siena, Policlinico Le Scotte, Viale Bracci, 53100 Siena, Italy

Received 31 March 2005 ,Accepted 15 May 2005.

References 

  1. Schwartz RS, Robbins JW. Post placement and restoration of endodontically treated teeth: a literature review. J Endod. 2004;30:289–301
  2. Grandini S, Goracci C, Monticelli F, Tay FR, Ferrari M. Fatigue resistance and structural integrity of fiber posts: three-bending test and SEM evaluation. Dent Mater 2005;21:75–82.
  3. Mannocci F, Innocenti M, Ferrari M, Watson TF. Confocal and scanning electron microscopy of teeth restored with fiber posts, metal posts and composite resin. J Endod. 1999;25:789–794
  4. Ferrari M, Vichi A, Mannocci F, Mason PN. Retrospective study of clinical behavior of several types of fiber posts. Am J Dent. 2000;13:14B–19B
  5. Aksornmuang J, Foxton RM, Nakajima M, Tagami J. Microtensile bond strength of a dual cure resin core material to glass and quartz fibre posts. J Dent. 2004;32:433–450
  6. Park SJ, Jin JS. Effect of silane coupling agent on interphase and performance of glass fibers/unsaturated polyester composites. J Coll Inter Sci. 2001;242:174–179
  7. Iglesias JG, Gonzàles-Benito J, Aznar AJ, Bravo J, Balsega J. Effect of glass fiber surface treatment on mechanical strength of epoxy based composite materials. J Coll Inter Sci. 2002;250:251–260
  8. Cheng TH, Jones FR, Wang D. Effect of fibre conditioning on the interfacial shear strength of glass fibre composite. Comp Sci Tech. 1993;48:89–96
  9. O'Keefe KL, Powers JM. Adhesion of resin composite core materials to dentin. Int J Prosthod. 2001;14:451–456
  10. Isidor F, Ödman P, Brondum K. Intermittent loading of teeth restored using prefabricated fiber post. Int J Prosthodont. 1996;9:131–136
  11. Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel. J Dent Res. 1955;34:849–853
  12. Nakabayashi N, Nakamura M, Yasuda N. Hybrid layer as a dentin bonding mechanism. J Esthet Dent. 1991;3:133–138
  13. Nakabayashi N. Resin reinforced dentin due to infiltration of monomers into dentine at the adhesive interface. Jpn J Dent Mater. 1982;1:78–81
  14. Thompson VP. Etching cobalt/chrome alloys for Maryland bridges. Trends Tech Contemp Dent Lab. 1984;1:41–46
  15. Horn HR, Horn HR. Porcelain laminate veneers bonded to etched enamel. In:  Phillips RW editors. Symposium on dental materials. Dent clin of north amer. vol. 27:1983;p. 671–684
  16. Ozcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cements to ceramics. Dent Mater. 2004;19:725–731
  17. Combe EC, Shaglouf A-MS, Watts DC, Wilson NHF. Mechanical properties of direct core materials. Dent Mat. 1999;15:158–165
  18. Chutian S, Platt JA, Cochran MA, More BK. Volumetric dimensional changes of six direct core materials. Dent Mater. 2004;20:345–351
  19. Sphor AM, Sobrinho LC, Consani S, Sinhoreti MA, Knowles JC. Influence of surface conditions and silane agent on the bond of resin to IPS Empress 2 ceramic. Int J Prosthodont. 2003;16:277–282
  20. Goracci C, Raffaelli O, Monticelli F, Balleri P, Bertelli E, Ferrari M. The adhesion between fiber posts and composite resin cores: microtensile bond strength with and without post silanization. Dent Mater 2005;21:437–44.
  21. Sahafi A, Peutzfeldt A, Asmussen E, Gotfredsen K. Bond strength of resin cement to surface-treated posts of titanium alloy, glass fiber, and zirconia, and to dentin. J Adhes Dent. 2003;5:153–162
  22. Cardoso PE, Sadek FT, Goracci C, Ferrari M. Adhesion testing with the microtensile method: effect of dental substrate and adhesive system on bond strength measurements. J Adhes Dent. 2002;4:291–297
  23. Cheng TH, Jones FR, Wang D. Effect of fibre conditioning on the interfacial shear strength of glass fibre composites. Comp Sci Tech. 1993;48:89–96
  24. Roizard X, Wery M, Kirmann J. Effects of alkaline etching on the surface roughness of a fibre-reinforced epoxy composite. Comp Struct. 2002;56:223–228
  25. Crasa JJ, Rowe-Tattib CA, Nivensb DA, Ligler FS. Comparison of chemical cleaning methods of glass preparation for silanization. Bios Bioelectr. 1999;14:683–688
  26. Bronson SH, Hansen AR, Nielsen HZ, Woxen IK. A comparative study of the immunogold labelling on H2O2-treated and heated epoxy sections. Micron. 2001;32:147–151
  27. Bronson SH. Deplasticizing or etching of epoxy sections with different concentration of sodium ethoxide to enhance the immunogold labelling. Micron. 2001;32:101–105
  28. Bouillaguet S, Troesch S, Wataha JC, Krejci I, Meyer JM, Pashley DH. Microtensile bond strength between adhesive cements and root canal dentin. Dent Mater. 2003;19:199–205
  29. Baskin DG, Erlandsen SL, Parson JA. Influence of Hydrogen Peroxide or alcoholic Sodium Hydroxide on the immunocytochemical detection of growth hormone and prolactin after osmium fixation. J Histochem Cytochem. 1979;27:1290–1292
  30. Kirmann J, Roizard X, Pagetti J, Halut J. Effect of alkaline permanganate etching of epoxy on the peel adhesion of electrolessly plated copper on a fibre reinforced epoxy composite. J Adhes Sci Tech. 1998;12:383–398
  31. Thorm CE, Walsh MK. The mechanism of permanganate desmearing. Print Circ Fabr. 1991;25:30–32
  32. Mann D, Fessmann J, Kampschulte G, Hopkins M. Adherent metalization of plastic composites. Surf Coat Tech. 1991;49:168–173
  33. Lassilla LVJ, Tonner J, le-Bell AM, Naiva K, Vallittu PK. Flexural properties of fiber reinforced root canal posts. Dent Mater. 2004;20:29–36
  34. Thompson VP, Del Castillo E, Livaditis GJ. Resin-bonded retainers. Resin bond to electrolytically etched non precious alloys. J Prosthet Dent. 1983;50:771–779
  35. Borges GA, Sphor AM, de Goes MF, Sobrinho LC, Chan DC. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent. 2003;89:479–488
  36. Dallari A, Mason PN. Restauri estetici con perni endocanalari in fibre di quarzo [Esthetic restorations with quartz fiber posts]. Bologna: Martina Ed.; 2004;p. 23–26 (in Italian)
  37. Addison O, Fleming GJP. The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain veneering material. Dent Mater. 2004;20:286–292
  38. Sahafi A, Peutzfeldt A, Asmussen E, Gotfredsen K. Effect of surface treatment of prefabricated posts on bonding of resin cements. Oper Dent. 2004;29:60–68
  39. Sahafi A, Peutzfeldt A, Asmussen E, Gotfredsen K. Retention and failure morphology of prefabricated posts. Int J Prosthodont. 2004;17:307–312
  40. Matinlinna JP, Ozcan M, Lassila LVJ, Vallittu PK. The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris (3-trimethoxysilylpropyl)isocyanurate on shear bond strength of composite resin to titanium metal. Dent Mater. 2004;20:804–813
  41. Glazer B. Restoration of endodontically treated teeth with carbon fibre posts: a prospective study. J Can Dent Assoc. 2000;66:613–618
  42. Labella R, Lambrechts P, Van Meerbeek B, Vanherle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater. 1999;15:128–137
  43. Bayne SC, Thompson JY, Swift EJ, Stamatiades P, Wilkerson M. A characterization of first-generation flowable composites. J Amer Dent Assoc. 1998;129:567–577
  44. Monticelli F, Grandini S, Goracci C, Ferrari M. Clinical behavior of translucent fiber posts and luting and restorative materials: a 2-year report. Int J Prosthodont. 2003;16:593–596
  45. Monticelli F, Goracci C, Grandini S, García-Godoy F and Ferrari M. Scanning electron microscopic evaluation of fiber post-resin core units built up with different resin composite materials. Am J Dent 2005;18:61–5.
  46. Gonzàles-Benito J. The nature of the structural gradient in epoxy curing at glass fiber/epoxy matrix interface using FITR imaging. J Coll Inter Sci. 2003;267:326–332

PII: S0109-5641(05)00235-6

doi: 10.1016/j.dental.2005.05.018

Dental Materials
Volume 22, Issue 7 , Pages 602-609 , July 2006

Article Tools

* Image Usage & Resolution