Dental Materials
Volume 22, Issue 4 , Pages 382-387 , April 2006

The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites

  • A.A. Zandinejad

      Affiliations

    • Restorative Department, School of Dentistry, Tehran University of Medical Sciences, P.O. Box 14155-5583, Tehran, Iran
    • Corresponding Author InformationCorresponding author. Correspondence address: 11, 4th Street, Velenjak Avenue, Tehran 19857, Iran; tel.: +98 21 2411484; fax: +98 21 2414822
    • ,
  • M. Atai

      Affiliations

    • Iran Polymer and Petrochemical Institute, P.O. Box 14965/115, Tehran, Iran
    • ,
  • A. Pahlevan

      Affiliations

    • Restorative Department, School of Dentistry, Tehran University of Medical Sciences, P.O. Box 14155-5583, Tehran, Iran

Received 25 November 2004 ,Accepted 7 April 2005.

References 

  1. Ruddle DE, Maloney MM, Thompson IY. Effect of novel filler particles on the mechanical and wear properties of dental composites. Dent Mater. 2002;18(1):72–80
  2. Craig RG, Powers JM. Restorative dental materials. 11th ed.. Mosby: St Louis; 2002;
  3. Roberson TM, Heyman H, Swift EJ. Sturdevant's art and science of operative dentistry. 4th ed. St Louis: Mosby; 2002;
  4. Van noort R. Introduction to dental materials. 2nd ed.. St Louis: Mosby; 2002;
  5. Leinfelder KF. New developments in resin restorative systems. J Am Dent Assoc. 1997;128(5):573–581
  6. Bayne SC, Heymann HO, Swift E. Update on dental composite restorations. J Am Dent Assoc. 1994;125(6):687–701
  7. Xu HHK, Martin TA, Antonucci JM, Eichmiller FC. Ceramic Whisker reinforcement of dental resin composites. J Dent Res. 1999;78(2):706–712
  8. Bowen RL, Reed LE. Semi porous reinforcing filler for composite resins. Preparation of provisional glass formulations. J Dent Res. 1976;55(5):738–747
  9. Bowen RL, Reed LE. Semi porous reinforcing filler for composite resins: II heat treatments and etching characteristics. J Dent Res. 1976;55(5):748–756
  10. Oh SC, Dong JK, Luthy H, Scharer P. Strength and micro structure of IPS Empress 2 glass–ceramic after different treatments. Int J Prosthodont. 2000;13:468–472
  11. Anusavice KJ, Zhang NZ, Moorhead JE. Influence of colorants on crystallization and mechanical properties of Lithia-based glass–ceramics. Dent Mater. 1994;10(2):141–146
  12. Giordano R. A Comparison of all-ceramic restorative systems. Part 1. Gen Dent. 1999;47(6):566–570
  13. Atai M, Nekoomanesh M, Hashemi SA, Amani S. Physical and mechanical properties of an experimental dental composite based on a new monomer. Dent Mater. 2004;20(7):663–668
  14. New American Dental Association specification no. 27 for direct filling resins. J Am Dent Assoc 94 (1977) 1191–4.
  15. International Standard ISO 4049. Dentistry-polymer-based filling, restorative and luting materials. Third edition, 2000-07-15.
  16. Li Y, Swartz ML, Phillips RW, Moore BK, Roberts TA. Effect of filler content and size on properties of composites. J Dent Res. 1985;64(12):1396–1401
  17. Venhoven BA, de Gee AJ, Werner A, Davidson CL. Influence of filler parameters on the mechanical coherence of dental restorative resin composites. Biomaterials. 1996;17(7):735–740
  18. Craig Pen RW, Tesk JA. Diametral tensile strength and dental composites. Dent Mater. 1987;3:46–48
  19. Zidan O, Asmussen E, Jorgensen KD. Tensile strength of Restorative resins. Scand J Dent Res. 1980;88(3):285–289
  20. Hannah CM, Combe EC. Mechanical properties of composite restorative materials. Br Dent J. 1976;140:167–173
  21. Gladys S, Van Meerbeek B, Braem M, Lambrechts P, Vanherle G. Comparative physico-mechanical characterization of new hybrid restorative materials with conventional Glass-Ionomer and resin composite restorative materials. J Dent Res. 1997;76(4):883–894
  22. Jones M, Bayne SC, Thompson JY. Effects of branched-fiber filler additions on dental composite mechanical properties. J Dent Res. 1997;76:76. Abstract No.500
  23. Rapp MM, Thompson JY, Bayne SC, Rathbun K. Development of pre-polymerized branched-fiber filler particles. J Dent Res. 1998;77(170):No518
  24. Jandt KD, Al-Jasser AM, Al-Ateeq K, Vowles RW, Allen GC. Mechanical properties and radiopacity of experimental glass-silica-metal hybrid composites. Dent Mater. 2002;18(6):429–435
  25. Chung KH, Greener EH. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehab. 1990;17(5):487–494
  26. Eldiwang M, Powers JM, George LA. Mechanical properties of direct and post cured composites. Am J Dent. 1993;6(5):222–224
  27. Khan AM, Satou N, Shintani H, Taira M, Wakasa K, Yamaki M. Effects of post-curing by heat on the mechanical properties of visible-light cured inlay composites. J Oral Rehab. 1993;20(6):605–614
  28. Powers JM, Smith LT, Eldiwany M, Ladd GD. Effects of post-curing on mechanical properties of a composite. Am J Dent. 1993;6(5):232–234

PII: S0109-5641(05)00189-2

doi: 10.1016/j.dental.2005.04.027

Dental Materials
Volume 22, Issue 4 , Pages 382-387 , April 2006

Article Tools

* Image Usage & Resolution