Dental Materials
Volume 22, Issue 3 , Pages 268-274 , March 2006

Effect of surface reaction layer on grindability of cast titanium alloys

  • Chikahiro Ohkubo

      Affiliations

    • Department of Removable Prosthodontics, Tsurumi University School of Dental Medicine, Yokohama, Japan
    • ,
  • Toshio Hosoi

      Affiliations

    • Department of Removable Prosthodontics, Tsurumi University School of Dental Medicine, Yokohama, Japan
    • ,
  • J. Phillip Ford

      Affiliations

    • Department of Biomaterials Science, Baylor College of Dentistry, Texas A&M University System Health Science Center, 3302 Gaston Ave., Dallas, TX 75246, USA
    • ,
  • Ikuya Watanabe

      Affiliations

    • Department of Biomaterials Science, Baylor College of Dentistry, Texas A&M University System Health Science Center, 3302 Gaston Ave., Dallas, TX 75246, USA
    • Corresponding Author InformationCorresponding author. Tel.: +1 214 370 7006; fax: +1 214 370 7001.

Received 6 January 2005 ,Accepted 12 April 2005.

References 

  1. Okabe T, Hero H. The use of titanium in dentistry. Cells Mater. 1995;5:211–230
  2. Nakajima H, Okabe T. Titanium in dentistry: Development and research in the U.S.A. Dent Mater J. 1996;15:77–90
  3. Yamauchi M, Sakai M, Kawano J. Clinical application of pure titanium for cast plate dentures. Dent Mater. 1988;7:39–47
  4. Bergman B, Bessing C, Ericson G, Lundquist P, Nilson H, Andersson M. A 2-year follow-up study of titanium crowns. Acta Odontol Scand. 1990;48:113–117
  5. Kononen M, Rintanen J, Waltimo A, Kempainen P. Titanium framework removable partial denture used for patients allergic to other metals: a clinical report and literature review. J Prosthet Dent. 1995;73:4–7
  6. Rubenstein JE. Stereo laser-welded titanium implant frameworks: clinical and laboratory procedures with a summary of 1-year clinical trials. J Prosthet Dent. 1995;74:284–293
  7. Aoki T. Quantitative evaluation of porosities in pure titanium castings. Tsurumi Univ Dent J. 1996;22:15–31
  8. Watari F. High temperature reactivity between titanium and refractory oxides in dental casting procedure. J Jpn Dent Mater. 1989;8:83–96
  9. Taira M, Moser JB, Greener EH. Studies of Ti alloys for dental castings. Dent Mater. 1989;5:45–50
  10. Chai TI, Stein RS. Porosity and accuracy of multiple-unit titanium castings. J Prosthet Dent. 1995;73:534–540
  11. Watanabe I, Watkins JH, Nakajima H, Atsuta M, Okabe T. Effect of pressure difference on the quality of titanium casting. J Dent Res. 1997;76:773–779
  12. Kawai Y, Takayama Y, Abe M, Ohshima A, Hosoi T, Sugiyama K, et al. An examination of polishing steps for titanium castings. Tsurumi Dent J. 1997;23:407–415
  13. Ohkubo C, Watanabe I, Hosoi T, Okabe T. Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers. J Prosthet Dent. 2000;83(1):50–57
  14. Ohkubo C, Shimura I, Aoki T, Hanatani S, Hosoi T, Okabe T. In vitro wear assessment of titanium alloy teeth. J Prosthod. 2002;11(4):263–269
  15. Ohkubo C, Shimura I, Aoki T, Hanatani S, Hosoi T, Hattori M, et al. Wear resistance of experimental Ti–Cu alloys. Biomaterials. 2003;24:3377–3381
  16. Miyazaki T, Tamaki Y, Suzuki E, Miyaji T. Polishing of titanium prosthetics (Part 1). Mechanical polishing by dental laboratory rotary wheels. J Jpn Dent Mater. 1987;6:917–922
  17. Miyakawa O, Watanabe K, Okawa S, Nakano S, Shiokawa N, Kobayashi M, et al. Grinding of titanium, Part 1. Commercial and experimental wheels made of silicon carbide abrasives. J Jpn Dent Mater. 1990;9:30–41
  18. Miyakawa O, Watanabe K, Okawa S, Nakano S, Shiokawa N, Kobayashi M, et al. Grinding of titanium. Part 2. Commercial vitrified wheels made of alumina abrasives. J Jpn Dent Mater. 1990;9:42–52
  19. Miyawaki H, Taira M, Wakasa K, Yamaki M. Dental high-speed cutting of four cast alloys. J Oral Rehabil. 1993;20:653–661
  20. Ohkubo C, Watanabe I, Ford JP, Nakajima H, Hosoi T, Okabe T. The machinability of cast titanium and Ti-6Al-4V. Biomaterials. 2000;21:421–428
  21. Watanabe I, Ohkubo C, Atsuta M, Okabe T. Cutting efficiency of air-turbine burs on cast titanium and dental casting alloys. Dent Mater. 2000;16(6):420–425
  22. Watanabe I, Kiyosue S, Ohkubo C, Aoki T, Okabe T. Machinability of cast commercial titanium alloys. J Biomed Mater Res. 2002;63:760–764
  23. Kikuchi M, Takada Y, Kiyosue S, Yoda M, Woldu M, Cai Z, et al. Grindability of cast Ti–Cu alloys. Dent Mater. 2003;19:375–381
  24. Metals handbook desk edition. Metals Park, OH: American Society for Metals; 1984. p. 1–24.
  25. Shaw MC. Metal cutting principles. Oxford: Clarendon Press; 1984;
  26. Nakamura S. Free-machining titanium. Proceedings of the Sixth World Conference on Titanium, France; 1988. p. 1415.
  27. Taira M, Ogino S, Wakasa K, Yamaki Y. Study on the dental application of machinable titanium alloys: machinability of ingots. J Jpn Dent Mater. 1994;13:128–129

PII: S0109-5641(05)00171-5

doi: 10.1016/j.dental.2005.04.020

Dental Materials
Volume 22, Issue 3 , Pages 268-274 , March 2006

Article Tools

* Image Usage & Resolution