Dental Materials
Volume 22, Issue 3 , Pages 243-249 , March 2006

Wear of resin denture teeth by two-body contact

Received 25 November 2004 ,Accepted 22 March 2005.

References 

  1. Rammelsberg P, Pospiech P, Gernet W, Heumann C, Toutenburg H. Etiologic factors of disk displacement in the TMJ. Dtsch Zahnaerztl Z. 1996;21:211–218[German]
  2. Yip KH, Smales RJ, Kaidonis JA. Differential wear of teeth and restorative materials: clinical implications. Int J Prosthodont. 2004;17:350–356
  3. Ekfeldt A, Oilo G. Wear mechanisms of resin and porcelain denture teeth. Acta Odontol Scand. 1989;47:391–399
  4. Satoh Y, Nagai E, Maejima K, Azaki M, Matsuzu R, Matsuzu M, et al. Wear of denture teeth by use of metal plates. Part 2: abrasive wear of posterior teeth. J Nihon Univ Sch Dent. 1992;34:16–27
  5. Winkler S, Monasky GE, Kwok J. Laboratory wear investigation of resin posterior denture teeth. J Prosthet Dent. 1992;67:812–814
  6. Dahl BL, Carlsson GE, Ekfeld A. Occlusal wear of teeth and restorative materials. A review of classification, etiology, mechanisms of wear, and some aspects of restorative procedures. Acta Odontol Scand. 1993;51:299–311
  7. Coffey JP, Goodkind RJ, DeLong R, Douglas WH. In vitro study of the wear characteristics of natural and artificial teeth. J Prosthet Dent. 1985;54:273–280
  8. Ogle RE, David LJ, Ortman HR. Clinical wear study of a new tooth material: part II. J Prosthet Dent. 1985;54:67–75
  9. Whitman DJ, McKinney JE, Hinman RW, Hesby RA, Pelleu GB. In vitro wear rates of three types of commercial denture tooth materials. J Prosthet Dent. 1987;57:243–246
  10. Douglas WH, Delong R, Pintado MR, Latta MA. Wear rates of artificial denture teeth opposed by natural dentition. J Clin Dent. 1993;4:43–47
  11. Suzuki S, Tamura F. In vitro wear of nano-composite denture teeth. J Dent Res. 2002;81:No1221
  12. Tappe A, Kubisch V, Schneider S. The abrasion resistance of plastic teeth-an in-vitro study. Schweiz Monatsschr Zahnmed. 1992;102:1467–1472
  13. Lindquist TJ, Ogle RE, Davis EL. Twelve-month results of a clinical wear study of three artificial tooth materials. J Prosthet Dent. 1995;74:156–161
  14. Jooste C, Geerts G, Adams L. Comparison of the clinical abrasion resistance of six commercially available denture teeth. J Prosthet Dent. 1997;77:23–27
  15. Ogle RE, Davis EL. Clinical wear study of three commercially available artificial tooth materials: thirty-six month results. J Prosthet Dent. 1998;79:145–151
  16. Hirano S, May KB, Wagner WC, Hacker CH. In vitro wear of resin denture teeth. J Prosthet Dent. 1998;79:152–155
  17. Von Fraunhofer JA, Razavi R, Khan Z. Wear characteristics of high-strength denture teeth. J Prosthet Dent. 1988;59:173–175
  18. ISO/TS 14569-2: 2001 (E). Dental materials-Guidance on testing of wear—part 2. Wear by two- and/or three body contact.
  19. Sulong MZ, Aziz RA. Wear of materials used in dentistry: a review of the literature. J Prosthet Dent. 1990;63:342–349
  20. DIN 50320. Deutsche Normen, Verschleiβ-Begriffe, Systemanalyse von Verschleiβvorgängen, Gliederung des Verschleiβgebietes. Berlin: Beuth; 1979;
  21. Kunzelmann KH. Verschleiβanalyse und -quantifizierung von Füllungsmaterialien in vivo und in vitro. Habilitationsschrift; 1996.
  22. Graf K, Rammelsberg P, Mehl A, Kunzelmann KH. In vitro investigations of three-body-wear of human tooth substance and metal alloys. Dtsch Zahnaerztl Z. 2001;56:495–500[German]
  23. Wassel RW, McCabe JF, Walls AW. A two-body frictional wear test. J Dent Res. 1994;73:1546–1553
  24. Wassel RW, McCabe JF, Walls AW. Wear characteristics in a two-body wear test. Dent Mater. 1994;10:269–274
  25. Koke U, Daum J, Rammelsberg P, Gilde H. Investigation of two-body-wear of ceramics fused to titanium. Dtsch Zahnaerztl Z. 2003;58:343–346[German]
  26. Abe Y, Sato Y, Akagawa Y, Ohkawa S. An in vitro study of high-strength resin posterior denture tooth wear. Int J Prosthodont. 1997;10:28–34
  27. Ratledge DK, Smith BG, Wilson RF. The effect of restorative materials on the wear of human enamel. J Prosthet Dent. 1994;72:104–203
  28. Al-Hiyasat AS, Saunders WP, Sharkey SW, Smith GM, Gilmour WH. Investigation of human enamel wear against four dental ceramics and gold. J Dent. 1998;26:487–495
  29. Douglas WH, Sakaguchi RL, De Long R. Frictional effects between teeth in an artificial mouth. Dent Mater. 1985;1:115–119
  30. Al-Mulla MA, Murphy WM, Huggett R, Brooks SC. Effect of water and artificial saliva on mechanical properties of some denture-base materials. Dent Mater. 1989;5:399–402
  31. Sakaguchi RL, Douglas WH, De Long R, Pintado MR. The wear of a posterior composite in an artificial mouth: a clinical correlation. Dent Mater. 1986;2:235–240
  32. Yap AU, Teoh SH, Hastings GW, Lu CS. Comparative wear ranking of dental restorative materials utilizing different wear simulations modes. J Oral Rehabil. 1997;24:574–580
  33. Yap AU, Ong LF, Teoh SH, Hastings GW. Comparative wear ranking of dental restoratives with the BIOMAT wear simulator. J Oral Rehabil. 1999;26:228–235

PII: S0109-5641(05)00164-8

doi: 10.1016/j.dental.2005.03.009

Dental Materials
Volume 22, Issue 3 , Pages 243-249 , March 2006

Article Tools

* Image Usage & Resolution