Dental Materials
Volume 22, Issue 1 , Pages 77-83 , January 2006

Analysis of potential lubricants for in vitro wear testing

  • Cecilia P. Turssi

      Affiliations

    • Department of Restorative Dentistry, School of Dentistry of Piracicaba, State University of Campinas (UNICAMP), Brazil
    • Corresponding Author InformationCorresponding author. Address: R. Theodolina M. Cocca, 85-Ap 333, São Carlos, SP, 13569-070, Brazil. Tel.: +55 16 3374 2025; fax: +55 16 3343 2150.
    • ,
  • Juliana J. Faraoni

      Affiliations

    • Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), Brazil
    • ,
  • Márcio de Menezes

      Affiliations

    • Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), Brazil
    • ,
  • Mônica C. Serra

      Affiliations

    • Department of Restorative Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), Brazil

Received 13 May 2004 ,Revised 5 January 2005 ,Accepted 8 February 2005.

References 

  1. DeLong R, Douglas WH. Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control. J Dent Res. 1983;62:32–36
  2. Kaidonis JA, Richards LC, Townsend GC, Tansley GD. Wear of human enamel: a quantitative in vitro assessment. J Dent Res. 1998;77:1983–1990
  3. Turssi CP, Purquerio BM, Serra MC. Wear of dental resin composites: insights into underlying processes and assessment methods—a review. J Biomed Mater Res. 2003;65B:280–285
  4. Söderling E. Practical aspects of salivary analyses. In:  Tenovuo JO editors. Human saliva: clinical chemistry and microbiology. Boca Raton: CRC Press; 1989;p. 2–24
  5. Wassel RW, McCabe JF, Walls AWG. Wear characteristics in a two-body wear test. Dent Mater. 1994;10:269–274
  6. Manhart J, Kunzelmann K-H, Chen HY, Hickel R. Mechanical properties and wear behavior of light-cured packable composite materials. Dent Mater. 2000;16:33–40
  7. Hu X, Marquis PM, Shortall AC. Influence of filler loading on the two-body wear of a dental composite. J Oral Rehabil. 2003;30:729–737
  8. Nagarajan VS, Jahanmir S, Thompson VP. In vitro contact wear of dental composites. Dent Mater. 2004;1:63–71
  9. Zantner C, Kielbassa AM, Martus P, Kunzelmann K-H. Sliding wear of 19 commercially available composites and compomers. Dent Mater. 2004;20:277–285
  10. Reeh ES, Douglas WH, Levine MJ. Lubrication of human and bovine enamel compared in an artificial mouth. Arch Oral Biol. 1995;40:1063–1072
  11. Hatton MN, Levine MJ, Margarone JE, Aguirre A. Lubrication and viscosity features of human saliva and commercially available saliva substitutes. J Oral Maxillofac Surg. 1987;45:496–499
  12. Levine MJ, Aguirre A, Hatton MN, Tabak LA. Artificial salivas: present and future. J Dent Res. 1987;66:693–698
  13. Christersson CE, Lindh L, Arnebrant T. Film-forming properties and viscosities of saliva substitutes and human whole saliva. Eur J Oral Sci. 2000;108:418–425
  14. Levine MJ. Development of artificial salivas. Crit Rev Oral Biol Med. 1993;4:279–286
  15. Reeh ES, Douglas WH, Levine MJ. Lubrication of saliva substitutes at enamel-to-enamel contacts in an artificial mouth. J Prosthet Dent. 1996;75:649–656
  16. Zum Gahr K-H. Microstructure and wear of materials. New York: Elsevier; 1987;[p. 560]
  17. Sakaguchi RL, Douglas WH, DeLong R, Pintado MR. The wear of a posterior composite in an artificial mouth: clinical correlation. Dent Mater. 1986;2:235–240
  18. Winkler MM, Greener EH, Lautenschlager EP. Non-linear in vitro wear of posterior composites with time. Dent Mater. 1991;7:258–262
  19. Willens G, Lambrechts P, Lesaffre E, Braem M, Vanherle G. Three-year follow-up of five posterior composites: SEM study of differential wear. J Dent. 1993;21:79–86
  20. Söderholm K-JM, Lambrechts P, Sarret D, Abe Y, Yang MCK, Labella R, et al. Clinical wear performance of eight experimental dental composites over three years determined by two measuring methods. Eur J Oral Sci. 2001;109:273–281
  21. Shortall AC, Hu XQ, Marquis PM. Potential countersample materials for in vitro simulation wear testing. Dent Mater. 2002;18:246–254
  22. Collins LCM, Dawes C. The surface area of the adult human mouth and thickness of the salivary film covering the teeth and oral mucosa. J Dent Res. 1987;66:1300–1302
  23. Vissink A, Waterman HA, ‘s-Gravenmade EJ, Panders AK, Vermey A. Rheological properties of saliva substitutes containing mucin, carboxymethylcellulose or polyethylenoxide. J Oral Pathol. 1984;13:22–28

PII: S0109-5641(05)00132-6

doi: 10.1016/j.dental.2005.02.010

Dental Materials
Volume 22, Issue 1 , Pages 77-83 , January 2006

Article Tools

* Image Usage & Resolution