Dental Materials
Volume 22, Issue 1 , Pages 69-76 , January 2006

Qualitative computer aided evaluation of dental impressions in vivo

  • Ralph G. Luthardt

      Affiliations

    • Department of Prosthetic Dentistry, Dresden University of Technology, University Hospital Carl Gustav Carus, Dental School, Fetscherstraße 74, 01307 Dresden, Germany
    • Corresponding Author InformationTel.: +49 351 458 3572; fax: +49 351 458 5314.
    • ,
  • Rainer Koch

      Affiliations

    • Department of Medical Informatics and Biometry, Dresden University of Technology, 01307 Dresden, Germany
    • ,
  • Heike Rudolph

      Affiliations

    • Department of Prosthetic Dentistry, Dresden University of Technology, University Hospital Carl Gustav Carus, Dental School, Fetscherstraße 74, 01307 Dresden, Germany
    • ,
  • Michael H. Walter

      Affiliations

    • Department of Prosthetic Dentistry, Dresden University of Technology, University Hospital Carl Gustav Carus, Dental School, Fetscherstraße 74, 01307 Dresden, Germany

Received 13 May 2004 ,Revised 14 December 2004 ,Accepted 8 February 2005.

References 

  1. Corso M, Abanomy A, Di Canzio J, Zurakowski D, Morgano SM. The effect of temperature changes on the dimensional stability of polyvinyl siloxane and polyether impression materials. J Prosthet Dent. 1998;79:626–631
  2. O'Mahony A, Spencer P, Williams K, Corcoran J. Effect of 3 medicaments on the dimensional accuracy and surface detail reproduction of polyvinyl siloxane impressions. Quint Int. 2000;31:201–206
  3. Rios MP, Morgano SM, Stein RS, Rose L. Effects of chemical disinfectant solutions on the stability and accuracy of the dental impression complex. J Prosthet Dent. 1996;76:356–362
  4. Millar BJ, Dunne SM, Robinson PB. In vitro study of the number of surface defects in monophase and two-phase addition silicone impressions. J Prosthet Dent. 1998;80:32–35
  5. Adabo GL, Zanarotti E, Fonseca RG, Cruz CAD. Effect of disinfectant agents on dimensional stability of elastomeric impression materials. J Prosthet Dent. 1999;81:621–624
  6. Boulton JL, Gage JP, Vincent PF, Basford KE. A laboratory study of dimensional changes for three elastomeric impression materials using custom and stock trays. Aust Dent J. 1996;41:398–404
  7. Federick DR, Caputo A. Comparing the accuracy of reversible hydrocolloid and elastomeric impression materials. J Am Dent Assoc. 1997;128:183–188
  8. Johnson GH, Chellis KD, Gordon GE, Lepe X. Dimensional stability and detail reproduction of irreversible hydrocolloid and elastomeric impressions disinfected by immersion. J Prosthet Dent. 1998;79:446–453
  9. Lepe X, Johnson GH. Accuracy of polyether and addition silicone after long-term immersion disinfection. J Prosthet Dent. 1997;78:245–249
  10. Nissan J, Laufer BZ, Brosh T, Assif D. Accuracy of three polyvinyl siloxane putty-wash impression techniques. J Prosthet Dent. 2000;83:161–165
  11. Purk JH, Willes MG, Tira DE, Eick JD, Hung SH. The effects of different storage conditions on polyether and polyvinylsiloxane impressions. J Am Dent Assoc. 1998;129:1014–1021
  12. Richards MW, Zeiaei S, Bagby MD, Okubo S, Soltani J. Working times and dimensional accuracy of the one-step putty/wash impression technique. J Prosthodont. 1998;7:250–255
  13. Rueda LJ, Sy-Munoz JT, Naylor WP, Goodacre CJ, Swartz ML. The effect of using custom or stock trays on the accuracy of gypsum casts. Int J Prosthodont. 1996;9:367–373
  14. Thouati A, Deveaux E, Iost A, Behin P. Dimensional stability of seven elastomeric impression materials immersed in disinfectants. J Prosthet Dent. 1996;76:8–14
  15. Fenske C, Sadat-Khonsari MR, Dade E, Jüde HD, Gütschow F. Der Einfluß verschiedener monophasenabformmaterialien auf die dimensionstreue von modellstümpfen. ZWR. 1998;107:749–752
  16. Fenske C, Sadat-Khonsari MR, Stroink M, Jüde HD. Einfluss des präparationswinkels auf die dimensionstreue von modellstümpfen unter berücksichtigung der abformtechnik. Korrektur-versus doppelmischabformung. ZWR. 2000;109:381–386
  17. Fenske C, Sadat-Khonsari MR, Jüde HD. Der einfluss verschiedener abformtechniken auf die dimensionstreue von modellstümpfen. Dtsch Zahnärztl Z. 2001;56:35–38
  18. Sadat-Khonsari MR, Fenske C, Taghavi M, Jüde HD. Der Einfluß der abzugsrichtung des abformlöffels auf die abformung präparierter stümpfe. Dtsch Zahnärztl Z. 1999;54:658–660
  19. Habib AN, Shehata MT. The effect of the type and technique used for impression making on the accuracy of elastomeric impression materials. Egypt Dent J. 1995;41:1409–1416
  20. Laufer BZ, Baharav H, Ganor Y, Cardash HS. The effect of marginal thickness on the distortion of different impression materials. J Prosthet Dent. 1996;76:466–471
  21. Wöstmann B, Symeonidis A, Ferger P. Abformgenauigkeit und lagerstabilität moderner C-silikone. Dtsch Zahnärztl Z. 1999;54:634–636
  22. Wassell RW, Abuasi HA. Laboratory assessment of impression accuracy by clinical simulation. J Dent. 1992;20:108–114
  23. Thielke S, Serrano JG, Lepe X. A method for true coordinate three-dimensional measurement of casts using a measuring microscope. J Prosthet Dent. 1998;80:506–510
  24. Carrotte PV, Johnson A, Winstanley RB. The influence of the impression tray on the accuracy of impressions for crown and bridge work-an investigation and review. Br Dent J. 1998;185:580–585
  25. Fenske C. The influence of five impression techniques on the dimensional accuracy of master models. Braz Dent J. 2000;11:19–27
  26. Mitchell CA, Pintado MR, Douglas WH. Nondestructive, in vitro quantification of crown margins. J Prosthet Dent. 2001;85:575–584
  27. Parsell DE, Anderson BC, Livingston HM, Rudd JI, Tankersley JD. Effect of camera angulation on adaptation of CAD/CAM restorations. J Esthet Dent. 2000;12:78–84
  28. Wöstmann B, Koniaris A, Ferger P. Der einfluß von feuchtigkeit auf die abformgenauigkeit in einem sulcus-fluid-flow-modell. Dtsch Zahnärztl Z. 1999;54:631–633
  29. Bloem TJ, Czerniawski B, Luke J, Lang BR. Determination of the accuracy of three die systems. J Prosthet Dent. 1991;65:758–762
  30. Lee IK, DeLong R, Pintado MR, Malik R. Evaluation of factors affecting the accuracy of impressions using quantitative surface analysis. Oper Dent. 1995;20:246–252
  31. Luthardt R, Sandkuhl O, Brakhage P, Kühmstedt P, Lazarek K. Analyse einzelner Fehlerquellen innerhalb der verfahrenskette abformung-modellherstellung-digitalisierung. Dtsch Zahnärztl Z. 1999;54:627–631
  32. Mincham W, Thurgate SM, Lewis AJ. Measurement of dimensional stability of elastomeric impression materials by holographic interferometry. Aust Dent J. 1981;26:395–399
  33. Yamashita S, Ai M, Geng Q, Sato M, Shinoda H, Ando S. Application of a newly developed 3-D deformation measurement system to prosthetic dentistry. J Oral Rehabil. 1996;23:849–855
  34. Wiskott HW, Perriard J, Scherrer SS, Belser UC. A new method to quantify wear using implant supported restorations. Dent Mater. 2000;16:218–225
  35. Ishida K. Accuracy of complete dental arch impressions and stone casts using a three-dimensional measurement system. Effects on accuracy of rubber impression materials and trays. Dent Jpn. 1990;27:73–79
  36. Dastane A, Vaidyanathan TK, Vaidyanathan J, Mehra R, Hesby R. Development and evaluation of a new 3-D digitization and computer graphic system to study the anatomic tissue and restoration surfaces. J Oral Rehabil. 1996;23:25–34
  37. Chadwick RG, Mitchell HL, Cameron I, Hunter B, Tulley M. Development of a novel system for assessing tooth and restoration wear. J Dent. 1997;25:41–47
  38. Knibbs PJ. Methods of clinical evaluation of dental restorative materials. J Oral Rehabil. 1997;24:109–123
  39. Peters MC, Delong R, Pintado MR, Pallesen U, Qvist V, Douglas WH. Comparison of two measurement techniques for clinical wear. J Dent. 1999;27:479–485
  40. Mehl A, Gloger W, Hickel R. Erzeugung von CAD-datensätzen für inlays und kronen mit funktionellen kauflächen. Dtsch Zahnärztl Z. 1997;52:520–524
  41. Mehl A, Gloger W, Kunzelmann KH, Hickel R. Entwicklung eines neuen optischen oberflächenmeßgerätes zur präzisen dreidimensionalen zahnvermessung. Dtsch Zahnärztl Z. 1996;51:23–28
  42. DeLong R, Pintado M, Douglas WH. Measurement of change in surface contour by computer graphics. Dent Mater. 1985;1:27–30
  43. Wilson RD, Maynard G. Intracrevicular restorative dentistry. Int J Periodont Restor Dent. 1981;1:34–49
  44. Wöstmann B. Wie genau lassen sich präparierte Zähne am patienten abformen?. ZWR. 1996;105:247–250
  45. Wöstmann B, Hufnagel A. Vergleich verschiedener methoden zur bestimmung der randschlussgenauigkeit von kronen in vivo. Dtsch Zahnärztl Z. 1997;52:272–274
  46. Böning KW, Walter MH, Schuette U. Clinical significance of surface activation of silicone impression materials. J Dent. 1998;26:447–452
  47. Qualtrough AJ, Piddock V. Fitting accuracy of indirect restorations: a review of methods of assessment. Eur J Prosthodont Restor Dent. 1992;1:57–61
  48. Luthardt RG, Kühmstedt P, Walter MH. A new method for the computer aided evaluation of three-dimensional changes of dental materials. Dent Mater. 2003;19:19–24
  49. Wöstmann B, Dohle A, Rettberg S. Zur frage der in vivo erreichbaren abformgenauigkeit. Dtsch Zahnärztl Z. 1994;49:679–682
  50. Krejci I, Reich T, Bucher W, Lutz F. [A new method for 3-dimensional wear measurement] Eine neue Methode zur dreidimensionalen verschleissmessung. Schweiz Monatsschr Zahnmed. 1994;104:160–169

PII: S0109-5641(05)00131-4

doi: 10.1016/j.dental.2005.02.015

Dental Materials
Volume 22, Issue 1 , Pages 69-76 , January 2006

Article Tools

* Image Usage & Resolution